Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
INVESTIGADORES
ESTRUCTURAS DE I+D+I
ACTIVIDAD INVESTIGADORA
INNOVACIÓN
Investigador
Jose Manuel Fernandez Gonzalez
Categoría Investigador
TITULAR UNIVERSIDAD
Escuela UPM
E.T.S. DE INGENIEROS DE TELECOMUNICACION
Departamento:
SEÑALES, SISTEMAS Y RADIOCOMUNICACIONES (N)
Centros/Institutos I+D+i
CENTRO I+D+I PROC. INFORMACIÓN Y TELECOM
Area Conocimiento
TEORIA DE LA SEÑAL Y COMUNICACIONES
Grupo de Investigación:
Grupo de Radiación
Email (Directorio UPM)
josemanuel.fernandez.gonzalez
upm.es
Teléfono (Directorio UPM)
910672329
Datos de Memorias relacionados
Proyectos de I+D+i y generación de recursos
37 Proyectos de I+D+i
1: (2008)
DISEÑO DE ANTENA DE RANURAS CON HAZ SECTORIAL EN BANDA X.
2: (2009)
Diseño de Antena de Ranuras con Haz Sectorial en Banda X
3: (2009)
Optimización de antenas de banda X (Haz pincel y sectorial)
4: (2010)
Diseño de Antena de Ranuras con Haz Sectorial en Banda X
5: (2010)
Optimización de antenas de banda X (Haz pincel y sectorial)
6: (2014)
Antenas activas para sistemas radar de vigilancia
7: (2014)
Diseño de un demostrador de antenas activas para sistemas radar de vigilancia
8: (2014)
SARAS: SISTEMA RÁPIDO DE ADQUISICIÓN DE SATELITES
9: (2014)
SISTEMAS DE COMUNICACIONES PARA SITUACIONES DE EMERGENCIA
10: (2015)
Anexo 3: Asesoría, desarrollo de similaciones electromagnéticas con el software comercial CST Studio Suite y medida de un prototipo de una junta rotatoria en banda K
11: (2015)
Asesoría Tecnológica para el Diseño de antena para un sistema 4G LTE
12: (2015)
JETSTREAM: Desarrollo de una antena banda KA embarcada para la prestación de servicios de acceso a internet por satélite en aviación comercial
13: (2015)
Prototipo de una unidad de monitorización y clasificación de señales de radio
14: (2015)
REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
15: (2015)
SARAS: SISTEMA RÁPIDO DE ADQUISICIÓN DE SATELITES
16: (2015)
SICOMORO: Sistemas de comunicaciones para situaciones de emergencia
17: (2015)
SPACE DEBRIS RADAR- RADAR PARA DETECCIÓN DE BASURA ESPACIAL ( SPADERADARCM)
18: (2015)
SPACE DEBRIS RADAR- RADAR PARA DETECCIÓN DE BASURA ESPACIAL ( SPADERADARCM) LABORATORIO
19: (2016)
(ARAICSANT): ARQUITECTURA DE REPETIDORES AÉREOS INTELIGENTES PARA COMUNICACIONES SEGURAS CON AERONAVES NO TRIPULADAS
20: (2016)
Asesoría Tecnológica para el Diseño de antena para un sistema 4G LTE
21: (2016)
REALIZACIÓN DE UN SISTEMA DE COMUNICACIONES AIRE-AIRE CON ANTENAS INTELIGENTES PARA ENLACES DE DATOS EN UAV¿S
22: (2016)
REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
23: (2016)
SPACE DEBRIS RADAR- RADAR PARA DETECCIÓN DE BASURA ESPACIAL ( SPADERADARCM)
24: (2017)
Diseño de Antena DEMAC
25: (2017)
Diseño de Antena DEMAC
26: (2017)
Evaluación de diseños para antena radar
27: (2017)
GR. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
28: (2017)
GR. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
29: (2017)
LAB 33. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
30: (2017)
MULTI.FUNCIONAL ANTENNAS FOR FUTURE NAVIGATION PAYLOADS
31: (2017)
REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
32: (2018)
FUTURE-RADIO: Sistemas y tecnologías radio para comunicaciones terrestres y espaciales de gran capacidad en un futuro hiperconectado
33: (2018)
GR. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
34: (2018)
MULTI.FUNCIONAL ANTENNAS FOR FUTURE NAVIGATION PAYLOADS
35: (2018)
REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
36: (2019)
Asesoría Técnica para la definición de la arquitectura global y de los elementos radiantes de antena IFF con apuntamiento electrónico
37: (2019)
Feed Array Development for MEO Tracking Antennas
Formación de Investigadores y Movilidad
1 Estancias y sabáticos recogidos en programas oficiales
1: (2018)
Design, Analysis, Prototyping and Measurement of Reconfigurable Active Antennas in Millimeter Bands
3 Tesis Doctorales
1: (2009)
Application of Metamaterial Structures in The Design, Analysis and Prototyping of Planar Antennas (En español: Aplicación de Estructuras Metamateriales en el Diseño, Análisis y Prototipado de Antenas Planas)
2: (2013)
Contribution to active array antennas at microwave bands - Contribución a los arrays de antenas activos en microondas.
3: (2014)
Contribution to active multi-beam reconfigurable antennas for L and S bands
Difusión de Resultados de Investigación
67 Artículos en revistas
1: (2008)
Characterization of Artificial Magnetic Conductor Strips for Parallel Plate Planar Antennas
2: (2009)
Hard Surfaces to Reduce Blockage in Thick Cylinders
3: (2009)
Ideally Hard Struts to Achieve Invisibility
4: (2009)
STACKED CIRCULAR PATCH ANTENNA WITH DUAL RIGHT/LEFT HAND CIRCULAR POLARIZATION FOR WIDEBAND APPLICATIONS IN X BAND.
5: (2010)
Electronically tunable phase response for phased array patches
6: (2010)
Electronically tunable phase response for phased array patches
7: (2011)
ELECTROMAGNETIC ANALYSIS OF PLANAR ARRAY STRUCTURES WITH MPIE-MoM METHOD AND NEIGHBORHOOD MUTUAL COUPLING
8: (2011)
Ku band transmitarray lens for microwave applications
9: (2011)
Lightweight Portable Planar Slot Array Antenna for Satellite Communications in X-Band
10: (2011)
MULTILAYERED PATCHES WITH TUNABLE PHASE RESPONSE FOR PHASED ARRAYS AT MICROWAVE FREQUENCIES
11: (2012)
DUAL CIRCULAR POLARIZED STEERING ANTENNA FOR SATELLITE COMMUNICATIONS IN X BAND
12: (2012)
Low-Profile Dual Circularly Polarized Antenna Array for Satellite Communications in the X Band
13: (2012)
Mutual Coupling Reduction Using EBG in Steering Antennas
14: (2013)
COMPARISON OF DIFFERENT METHODS FOR THE EXPERIMENTAL ANTENNA PHASE CENTER DETERMINATION USING A PLANAR ACQUISITION SYSTEM
15: (2013)
Design and Implementation of a Quasi-Orthogonal Switching Beam-Former for Triangular Arrays of Three Radiating Elements
16: (2013)
Design and Implementation of a Quasi-Orthogonal Switching Beam-Former for Triangular Arrays of Three Radiating Elements
17: (2013)
GEODA-SARAS: Multi-Phased Array Planar Antenna for Satellite Communications
18: (2013)
LOW LOSS POWER DISTRIBUTION NETWORK IN STRIPLINE TECHNOLOGY FOR PLANAR ARRAY ANTENNAS
19: (2014)
High-frequency radiating element and modified 3 dB/90 degrees electronic shifting circuit with circular polarisation for broadband reflectarray device cells
20: (2016)
Broadband Electronically Tunable Reflection-Based Phase Shifter for Active-Steering Microwave Reflectarray Systems in Ku-Band
21: (2016)
Broadband electronically tunable reflection-based phase shifter for active-steering microwave reflectarray systems in Ku-band
22: (2016)
Broadband planar multilayered reflectarray based on circular stacked patches and reflective printed circuits for microwave communication systems
23: (2016)
Circularly-polarized broadband planar lightweight reflectarray with eligible pattern for satellite communications in Ku-Band
24: (2016)
Design proposal for Ridge Gap Waveguide and comparison with other technologies in Ka to W bands
25: (2016)
Design Rules for Antenna Placement on MIMO Systems
26: (2016)
Electronically Reconfigurable Phase Shifter for Reflectarray Applications at Microwave Bands
27: (2016)
Electronically Reconfigurable Reflective Phase Shifter for Circularly Polarized Reflectarray Systems
28: (2016)
Ka band active array antenna for mobile satellite communications
29: (2016)
New Antenna Topologies for 5G Communication Systems
30: (2016)
Study of materials and manufacturing technologies for an antenna distribution network in Ka band
31: (2016)
X Band Phased Array Design for Radar Application
32: (2017)
An Embedded Lightweight Folded Printed Quadrifilar Helix Antenna: UAV Telemetry and Remote Control Systems
33: (2017)
An Embedded Lightweight Folded Printed Quadrifilar Helix Antenna UAV telemetry and remote control systems
34: (2017)
Broadband Electronically Tunable Reflection-Based Phase Shifter For Active-Steering Microwave Reflectarray Systems in Ku-Band: Prototype Validation
35: (2017)
Circular Array Antenna for UAV-UAV Communications
36: (2017)
Circularly polarised broadband planar lightweight reflectarray with eligible pattern for satellite communications in Ku-band
37: (2017)
Circularly-Polarized Broadband Planar Lightweight Reflectarray with Eligible Radiating Pattern For Satellite Communications in Ku-Band
38: (2017)
Further on 'broadband electronically tunable reflection-based phase shifter for active-steering microwave reflectarray systems in Ku-Band': prototype validation
39: (2017)
Groove Gap Waveguide in metallized 3D-printed plastic and in mechanized aluminium in Ka band
40: (2017)
Groove Gap Waveguide in 3-D Printed Technology for Low Loss, Weight, and Cost Distribution Networks
41: (2017)
Groove Gap Waveguide in 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks
42: (2017)
Low Losses Printed Distribution Network Technologies for Planar Antennas in Ka Band
43: (2017)
Planar Antenna Array on LTCC and Rogers substrates for 5G applications
44: (2018)
An Embedded Printed Antenna with Omnidirectional Azimuth Coverage for Automotive Applications
45: (2018)
An Embedded Printed Antenna with Omnidirectional Azimuth Coverage for Automotive Applications
46: (2018)
Comparison Between a Multiband PIFA and a Ultrawideband Archimedean Spiral Antenna for Energy Harvesting in Microwave Bands
47: (2018)
Development of aperture-coupled patch array antennas at 60 GHz for 5G applications
48: (2018)
Low Cost Millimeter-Wave Antenna with Simultaneous Sum and Difference Patterns for 5G Point-to-Point Communications
49: (2018)
Low-loss Loaded Line Phase Shifter for Radar Application in X band
50: (2018)
Millimeter-Wave Components Based on Gap Waveguide Using Additive Manufacturing
51: (2019)
A Miniaturized Ultrawideband Archimedean Spiral Antenna for Low-Power Sensor Applications in Energy Harvesting
52: (2019)
A miniaturized ultrawideband Archimedean spiral antenna for low-power sensor applications in energy harvesting
53: (2019)
Analytical Approach of Director Tilting in Nematic Liquid Crystals for Electronically Tunable Devices
54: (2019)
Broken Glide-Symmetric Holey Structures for Bandgap Selection in Gap-Waveguide Technology
55: (2019)
Design of a Perforated Flat Luneburg Lens Antenna Array for Wideband Millimeter-Wave Applications
56: (2019)
Gain-Reconfigurable Hybrid Metal-Graphene Printed Yagi Antenna for Energy Harvesting Applications
57: (2019)
Generalized Director Approach for Liquid-Crystal-Based Reconfigurable RF Devices
58: (2019)
Intertwined inductive frequency selective surface: An application for satellite communications
59: (2019)
Metal-Coated 3D-Printed Waveguide Devices for mm-Wave Applications
60: (2019)
One-Plane Glide-Symmetric Holey Structures for Stop-Band and Refraction Index Reconfiguration
61: (2019)
One-Plane Glide-Symmetric Structures Over Dielectric Substrate
62: (2019)
Parasitics Impact on the Performance of Rectifier Circuits in Sensing RF Energy Harvesting
63: (2019)
Parasitics Impact on the Performance of Rectifier Circuits in Sensing RF Energy Harvesting
64: (2019)
RF Energy Harvesting System Based on an Archimedean Spiral Antenna for Low-Power Sensor Applications
65: (2019)
Smart Relay Architecture for over-the-Horizon High Quality Communications With Unmanned Aerial Vehicles
66: (2019)
Space Reduction Between Parallel Gap Waveguides Using Stacked Glide-Symmetric Metal Sheets
67: (2019)
3-D-Printed Modified Butler Matrix Based on Gap Waveguide at W-Band for Monopulse Radar
2 Capítulos de libros
1: (2011)
New Antenna Array Architectures for Satellite Communications
2: (2019)
Chapter: New One-Plane Glide Symmetric Holey Structures for Stop-Band and Refraction Index Reconfiguration
2 Conferencias invitadas en congresos
1: (2018)
Metal-Coated 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks in Antennas at Millimeter Wave Bands
2: (2018)
Metal-Coated 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks in Antennas at Millimeter Wave Bands
3 Cursos, seminarios y tutoriales
1: (2009)
Athens 2009
2: (2013)
Athens course "Antenna design and measurement techniques"
3: (2018)
Ponente invitado: Metal-Coated 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks in Antennas at Millimeter Wave Bands
59 Ponencia en Congresos
1: (2008)
Caracterización de una lente zurda plana para la excitación de antenas planas de ranuras
2: (2008)
Comparisons of Blockage Widths of Ideally Hard Cylinders of Different Cross-Sectional Shapes
3: (2009)
"Application of Metamaterial Structures in Antennas"
4: (2009)
"Parallel-Plate Slot Antenna with a Planar Left-Handed Lens for TEM Plane Wave Excitation at 7.5 GHz"
5: (2011)
Electronic Steering antenna onboard for satellite communications in X band.
6: (2011)
Matriz de Butler de banda ancha en banda X para antenas de haz reconfigurable.
7: (2011)
Mutual coupling reduction techniques in electronic steering antennas in X band
8: (2012)
New EBG solutions for mutual coupling reduction
9: (2012)
Revision of EBG metamaterials and active antennas
10: (2013)
Radiating Element of GEODA-SARAS
11: (2013)
Radiating element of GEODA-SARAS
12: (2014)
GEODA-SARAS: Multi-Phased Array Planar Antenna. Cell Module Measurements
13: (2014)
GEODA-SARAS: Multi-Phased Array Planar Antenna Design and Measurements
14: (2015)
Antenas en Array Activas para Comunicaciones y Sistemas de Localización
15: (2015)
Planar Multilayered Printed Reflectarrays for Satellite Communications in Ku-Band
16: (2016)
Design Proposal for Ridge Waveguide and Comparison with Other Technologies in Ka to W Bands
17: (2016)
Electronically Reconfigurable Phase Shifter For Reflectarray Applications at Microwave Bands
18: (2016)
Ka Band Active Array Antenna For Mobile Satellite Communications
19: (2016)
New Antenna Topologies For 5G Communication Systems
20: (2016)
Over-the-Horizon Communications Systems For Uavs Based on Intelligent Antennas.
21: (2016)
Study of Materials and Manufacturing Technologies for an Antenna Distribution Network in Ka Band
22: (2016)
Subarray activo para antenas de comunicaciones por satélite en banda Ka
23: (2016)
Substrate Integrated Waveguide and Gap
24: (2016)
X Band Phased Array Design For Radar Application
25: (2017)
Circular Array Antenna for UAV-UAV
26: (2017)
Circular array antenna tor UAV-UAV communications
27: (2017)
Comparison of 60 GHz Planar Array Antenna on LTCC and Rogers Substratesfor 5G applications
28: (2017)
Desfasadores de Bajas Pérdidas en Línea de Transmisión Cargadas
29: (2017)
Groove Gap Waveguide in Metallized 3D-Printed Plastic and in Mechanized Aluminium in Ka Band
30: (2017)
Low Losses Printed Distribution Network
31: (2017)
Low Losses Printed Distribution Network Technologies for Planar Antennas in Ka Band
32: (2017)
Phase-Control-Integrated LTCC-Printed Radiating Elements for Mobile Satellite Communications
33: (2017)
Planar Antenna Array on LTCC and Rogers substrates for 5G applications
34: (2018)
A Planar Array Slot Antenna Fed by Top-to-Bottom-Contactless Waveguides
35: (2018)
Additive Manufacturing and Liquid Crystals for New Millimeter-Wave Devices
36: (2018)
An Electrical-Contactless Substrate-Over-Waveguide Planar Array Slot Antenna
37: (2018)
Comparison Between a Multiband PIFA and a Ultrawideband Archimedean Spiral Antenna for Energy Harvesting in Microwave Band
38: (2018)
Development of Aperture-Coupled Patch Array Antennas at 60 GHz for 5G Applications
39: (2018)
Glide-Symmetric Holey Metallic Structures for Cost-Effective Implementations of Gap Waveguide Technology
40: (2018)
Glide-Symmetric Holey Structure with Selected Bandgaps for Gap-Waveguide Technology
41: (2018)
Low-Loss Loaded Line Phase Shifter for Radar Application in X band
42: (2018)
Low-loss Loaded Line Phase Shifter for Radar Application in X band
43: (2018)
Millimeter-Wave Components Based on Gap Waveguide Using Additive Manufacturing
44: (2018)
Monopulse RLSA Antenna Based on A Gap Waveguide Butler Matrix with a Feeding Cavity at 94 GHz
45: (2018)
Monopulse RLSA Antenna with Gap-Waveguide Feeding Network for Space Debris Radar at 94 GHz
46: (2018)
Monopulse Space Debris Radar Antenna based on RLSA and 3D-Printed Gap Waveguide at 94 GHz
47: (2018)
New Manufacturing Technologies for 5G Millimeter Wave Antennas
48: (2018)
New Radiofrequency Technologies for 5G Systems
49: (2018)
Outline of a Radiofrequency Energy Harvesting System Based on an Ultrawideband Archimedean Spiral Antenna
50: (2018)
Quad Band Inductive Frequency Selective Surface: An application for Satellite Communications
51: (2019)
Beam Steering using Active Artificial Magnetic Conductors: A 10-Degree Step Controlled Steering
52: (2019)
Design of a Perforated Flat Luneburg Lens Antenna Array for Wideband Millimeter-Wave Applications
53: (2019)
Docencia de Antenas Basadas en Proyectos
54: (2019)
Electrically Tunable Phase Shifter Based on Liquid Crystal and 3D-Printed Gap Waveguide at W band
55: (2019)
Floquet Analysis of Glide-Symmetric Metasurfaces with Elliptic Holes
56: (2019)
Gain-Reconfigurability Hybrid Metal-Graphene Printed Yagi Antenna for Energy Harvesting Applications
57: (2019)
Interwined Inductive Frequency Selective Surface: Na Application for Satellite Communications
58: (2019)
One Plane Glide-Symmetric Structures over Dielectric Substrate
59: (2019)
Space Reduction Between Parallel Gap Waveguide using Stacked Glide-Symmetric Metal Sheets
Explotación de Resultados y Transferencia de Tecnología
5 Patentes
1: (2008)
Dispositivo desfasador reconfigurable de rafiofrecuencia para banda Ku
2: (2009)
Antena Plana de Parches Compacta y Modular para Transmisión y Recepción en Banda Ku y con Polarización Circular a Derechas e Izquierdas Seleccionable.
3: (2009)
Antena Plana de Ranuras para Transmisión y Recepción en Banda X y Método de cambio de Polarización de la misma.
4: (2009)
Antena Plana en Array para Transmisión y Recepción en Banda X con Polarización Circular Seleccionable.
5: (2009)
Dispositivo Desfasador Reconfigurable de Radiofrecuencia para Banda Ku
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2021 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
