Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
INVESTIGADORES
ESTRUCTURAS DE I+D+I
ACTIVIDAD INVESTIGADORA
INNOVACIÓN
Investigador
Carlos del Cañizo Nadal
Categoría Investigador
CATEDRATICO UNIVERSIDAD
Cargos actuales
DIRECTOR DE INSTITUTO.
Escuela UPM
E.T.S. DE INGENIEROS DE TELECOMUNICACION
Departamento:
ELECTRÓNICA FÍSICA, INGENIERÍA ELÉCTRICA Y FÍSICA APLICADA (N)
Centros/Institutos I+D+i
INSTITUTO DE ENERGIA SOLAR
Area Conocimiento
TECNOLOGIA ELECTRONICA
Grupo de Investigación:
Silicio y Nuevos Conceptos para Células Solares
Email (Directorio UPM)
carlos.canizo
upm.es
Teléfono (Directorio UPM)
910672521
Datos de Memorias relacionados
Proyectos de I+D+i y generación de recursos
91 Proyectos de I+D+i
1: (2007)
ASESDOS
2: (2007)
ASESUNO
3: (2007)
CESIDEL
4: (2007)
CRYSTALCLEAR
5: (2007)
LEONINO
6: (2007)
SOLARSI-Cañizo
7: (2007)
TOPSICLE
8: (2008)
ASESCUATRO
9: (2008)
ASESTRES
10: (2008)
BP-Learning
11: (2008)
BPLearning
12: (2008)
CINCEL
13: (2008)
CINCEL
14: (2008)
CRYSTALCLEAR
15: (2008)
DIPSI
16: (2008)
DIPSI
17: (2008)
EPIMETSI: High Throughput epitaxial reactor development for solar cell manufacturing from mg-silicon
18: (2008)
EPIMETSI:High throughput epitaxial reactor development for solar cell manufacturing from mg-silicon
19: (2008)
GRUPO LUQUE
20: (2008)
SOLARSI (Cañizo)
21: (2008)
SOLARSI (Cañizo)
22: (2009)
BAJO COSTE Y ALTA EFICACIA EN CELULAS BIFACIALES DE SILICIO ULTRA-FINA
23: (2009)
CÁLCULOS CUÁNTICOS PARA CÉLULAS SOLARES
24: (2009)
Crystalline Silicon PV: Low-cost, highly efficient and reliable modules (CRISTAL CLEAR) CONTRACT Nº SES6-CT-2003-502583
25: (2009)
PLAN PILOTO DE ULTRAPURIFICACION DE SILICIO
26: (2009)
PLANTA PILOTO DE PURIFICACION DE SILICIO PSE-120000-2007-3
27: (2009)
SILICIO DE GRADO SOLAR INVETIGACION DE UN PROCESO INTEGRAL PARA PRODUCIRLO Y FABRICAR CON EL CELULAS SOLARES
28: (2010)
ASESORIA EN EL DISEÑO DE PLAN DE I+D DE LA EMPRESA DC WAFERS.
29: (2010)
Asesoría en la construcción de una planta piloto de purificación de silicio.
30: (2010)
ASESORÍA ENM PRINCIPIOS DE FUNCIONAMIENTO DE CÉLULAS SOLARES Y PROCESOS DE FABRICACIÓN.
31: (2010)
ASESORIA PARA EL ESTABLECIMIENTO DE UN PROTOCOLO DE CARACTERIZACIÓN DE SILICIO SOLAR.
32: (2010)
ASESORÍA PARA LA OPERACIÓN DE UN REACTOR DE DEPÓSITO DE POLISILÍCIO.
33: (2010)
ASISTENCIA EN EL CRECIMIENTO DE BLOQUES DE SILICIO MULTICRISTALINO Y CORTE EN OBLEAS PARA APLICACIONES FOTOVOLTAICAS.
34: (2010)
BAJO COSTE Y ALTA EFICACIA EN CELULAS BIFACIALES DE SILICIO ULTRA-FINA
35: (2010)
Crystalline Silicon PV: Low-cost, highly efficient and reliable modules (CRISTAL CLEAR) CONTRACT Nº SES6-CT-2003-502583
36: (2010)
DESARROLLO DE LA INGENIERIA PARA LA PURIFICACION DEL SILICIO
37: (2010)
FABRICACIÓN, UTILIZACIÓN Y CARACTERIZACIÓN DEL MATERIAL SILICIO FOTOVOLTAICO POR VIA METALÚRGICA CS-SIr
38: (2010)
PLAN PILOTO DE ULTRAPURIFICACION DE SILICIO
39: (2010)
PLANTA PILOTO DE PURIFICACION DE SILICIO PSE-120000-2007-3
40: (2010)
PRESENTACION DE PROPUESTA CRYSTHIN AL 7º PROGRAMA MARCO
41: (2011)
CRYSTALLINE SILICON PV: LOW-COST, HIGHLY EFFICIENT AND RELIABLE MODULES (CRISTAL CLEAR) CONTRACT Nº SES6-CT-2003-502583
42: (2011)
FABRICACIÓN, UTILIZACIÓN Y CARACTERIZACIÓN DEL MATERIAL SILICIO FOTOVOLTAICO POR VIA METALÚRGICA CS-SIR
43: (2011)
NGCPV: A new generation of concentrator photovoltaic cells, modules and systems
44: (2011)
POLYSILICON DEPOSITION ONTO HIGH-SURFACE-AREA PLATES IN A CVD PROTOTYPE
45: (2011)
TECNOLOGIAS INDUSTRIALES PARA MODULOS FOTOVOLTAICOS DE ALTA EEFICIENCIA Y BAJO CONSTE BASADOS EN CELULAS DESGADAS DE SILICO CRITALINO
46: (2012)
CONTRATO DE TRABAJO PARA LA REALIZACIÓN DE UN PROYECTO DE INVESTIGACIÓN. CARLOS HERRERO AGUSTIN
47: (2012)
ECOSOLE : Elevated Concentration photovoltaic solar energy generator and fully automated machinery for high throughput manufacturing and testing
48: (2012)
FABRICACIÓN, UTILIZACIÓN Y CARACTERIZACIÓN DEL MATERIAL SILICIO FOTOVOLTAICO POR VIA METALÚRGICA CS-SIR
49: (2012)
POLYSILICON DEPOSITION ONTO HIGH-SURFACE-AREA PLATES IN A CVD PROTOTYPE
50: (2012)
TECNOLOGIAS INDUSTRIALES PARA MODULOS FOTOVOLTAICOS DE ALTA EEFICIENCIA Y BAJO CONSTE BASADOS EN CELULAS DESGADAS DE SILICO CRITALINO
51: (2013)
APOYO TECNOLÓGICIO EN LA FABRICACIÓN, INSTALACIÓN Y DISEMINACIÓN DE EQUIPOS Y SERVICIOS PARA LA INDUSTRIA FOTOVOLTAICA QUE SE GENERAN MAYORITARIAMENTE EN COLABORACIÓN MÚTUA
52: (2013)
NUEVA ERA DE REACTORES PRODUCTORES DE TRICLOROSILANO Y POLISILICIO PARA APLICACIONES FOTOVOLTAICAS
53: (2013)
NUEVA ERA DE REACTORES PRODUCTORES DE TRICLOROSILANO Y POLISILICIO PARA APLICACIONES FOTOVOLTAICAS
54: (2013)
TECNOLOGIAS INDUSTRIALES PARA MODULOS FOTOVOLTAICOS DE ALTA EEFICIENCIA Y BAJO CONSTE BASADOS EN CELULAS DESGADAS DE SILICO CRITALINO
55: (2014)
APOYO TECNOLÓGICIO EN LA FABRICACIÓN, INSTALACIÓN Y DISEMINACIÓN DE EQUIPOS Y SERVICIOS PARA LA INDUSTRIA FOTOVOLTAICA QUE SE GENERAN MAYORITARIAMENTE EN COLABORACIÓN MÚTUA
56: (2014)
CHEETAH: Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe s Research and Development efforts in support of its PV industry
57: (2014)
COST-REDUCTION THROUGH MATERIAL OPTIMISATION AND HIGHER ENERGY OUTPUT OF SOLAR PHOTOVOLTAIC MODULES (CHEETAH)
58: (2014)
FABRICACIÓN, UTILIZACIÓN Y CARACTERIZACIÓN DEL MATERIAL SILICIO FOTOVOLTAICO POR VIA METALÚRGICA CS-SIR
59: (2014)
LONGESST: Low Cost Germanium Substrates for Next Generation 4-Junction Space Solar Cells Utilising Dilute Nitride Technology
60: (2014)
NATRIS: NUEVA ERA DE REACTORES PRODUCTORES DE TRICLOROSILIANO Y POLISILICIO PARA APLICACIONES FOTOVOLTAICAS
61: (2014)
Silicon deposition in a CVD prototype by a rod-in-tube technique
62: (2014)
SILSTORE: SOLUCIÓN DE ALMACENAMIENTO BASADA EN SILICIO PARA TOPIC LCE 10-2014 DEL H2020
63: (2014)
TECNOLOGIAS INDUSTRIALES PARA MODULOS FOTOVOLTAICOS DE ALTA EEFICIENCIA Y BAJO CONSTE BASADOS EN CELULAS DESGADAS DE SILICO CRITALINO
64: (2014)
TITULO EVALUACIÓN EXPERIMENTAL DE PLACAS CERÁMICAS PARA EL DEPOSITO DE SILICIO A PARTIR DE TRICLOROSILANO EN UN REACTOR CVD (CHEMICAL VAPOR DEPOSITION)
65: (2015)
CPVMatch: Concentrating Photovoltaic modules using advanced technologies and cells for highest efficiencies
66: (2015)
EXPERIMENTAL ASSESSMENT OF THE FEASIBILITY OF SILICON THERMAL SHIELDS FOR POLYSILICON DEPOSITION
67: (2015)
Expert witnesses in a legal matter relating to polysilicon deposition technology
68: (2015)
H2020-SILSTORE: SILSTORE: Solución de almacenamiento basada en silicio para TOPIC LCE10-2014 del H2020
69: (2015)
MATERIALES, DISPOSITIVOS Y TECNOLOGÍA PARA EL DESARROLLO DE LA INDUSTRIA FOTOVOLTAICA (MADRID-PV)
70: (2015)
NATRIS: NUEVA ERA DE REACTORES PRODUCTORES DE TRICLOROSILIANO Y POLISILICIO PARA APLICACIONES FOTOVOLTAICAS
71: (2015)
SEIS EXPERIMENTOS DE HIDROCLORACIÓN SOBRE MUESTRAS DE SILICIO METALÚRGICO CONDUCIDOS A CONDICIONES DE OPERACIÓN FIJAS PARA CONFIRMAR REPRODUCIBILIDAD, NIVEL DE CONFIANZA Y ERROR
72: (2015)
SILICON DEPOSITION IN A CVD PROTOTYPE BY A ROD-IN-TUBE TECHNIQUE
73: (2015)
TABACOdeLYAR: Células TAndem en silicio de BAjo COste con obleas muy DELgadas Y procesos ApRopiados
74: (2015)
WITNESSES IN A LEGAL MATTER RELATING TO POLYSILICON DEPOSITION TECHNOLOGY
75: (2016)
: Desarrollo de células solares industriales de alta eficiencia utilizando sustratos delgados de silicio de bajo coste
76: (2016)
SEF-IES. MATERIALES, DISPOSITIVOS Y TECNOLOGÍA PARA EL DESARROLLO DE LA INDUSTRIA FOTOVOLTAICA (MADRID-PV)
77: (2016)
SEIS EXPERIMENTOS DE HIDROCLORACIÓN SOBRE MUESTRAS DE SILICIO METALÚRGICO CONDUCIDOS A CONDICIONES DE OPERACIÓN FIJAS PARA CONFIRMAR REPRODUCIBILIDAD, NIVEL DE CONFIANZA Y ERROR
78: (2016)
SILICON DEPOSITION IN A CVD PROTOTYPE BY A ROD-IN-TUBE TECHNIQUE
79: (2016)
WITNESSES IN A LEGAL MATTER RELATING TO POLYSILICON DEPOSITION TECHNOLOGY
80: (2017)
AMADEUS: Next GenerAtion MateriAls and Solid State DevicEs for Ultra High Temperature Energy Storage and Conversion
81: (2017)
TORMES: Almacenamiento de Energía en Aleados de Silicio Fundido
82: (2018)
CÉLULAS TANDEM EN SILICIO DE BAJO COSTE CON OBLEAS MUY DELGADAS Y PROCESOS APROPIADOS
83: (2018)
ConCEPT: Célula sOlar de silicio Con Emisor de PerovskiTa
84: (2018)
COST-REDUCTION THROUGH MATERIAL OPTIMISATION AND HIGHER ENERGY OUTPUT OF SOLAR PHOTOVOLTAIC MODULES (CHEETAH)
85: (2018)
EVALUACIÓN DEL POTENCIAL FOTOVOLTAICO DE OBLEAS DE SILICIO SOLAR PURIFICADO POR VÍA METALÚRGICA
86: (2018)
FOSTERING A NEXT GENERATION OF EUROPEAN PHOTOVOLTAIC SOCIETY THROUGH OPEN SCIENCE PARTICIPANT
87: (2018)
GRECO: Fostering a Next Generation of European Photovoltaic Society through Open Science
88: (2018)
GRECO: Fostering a Next Generation of European Photovoltaic Society through Open Science
89: (2018)
TÓMBALA MOBISOL: esTructuras ÓptiMas BifAciaLes y sistemAs eficientes con MÓdulos BIfaciales de Silicio SOLar
90: (2019)
DISEÑO Y FABRICACION DE CELULAS TERMO-FOTOVOLTAICAS DE BAJO COSTE PARA LA RECUPERACION DE CALOR EN INDUSTRIAS DE ALTA TEMPERATURA (CETEL)
91: (2019)
EVALUACIÓN DEL POTENCIAL FOTOVOLTAICO DE OBLEAS DE SILICIO SOLAR PURIFICADO POR VÍA METALÚRGICA
Formación de Investigadores y Movilidad
8 Estancias y sabáticos recogidos en programas oficiales
1: (2007)
Estancia de D.Gonzalo del Coso en la Universidad de Berkeley, EEUU
2: (2014)
Estancia de investigación en el MIT (Massachusetts Institute of Technology) - Photovoltaic Research Laboratory
3: (2014)
Estancia de investigación en el MIT (Massachusetts Institute of Technology) - Photovoltaic Research Laboratory
4: (2015)
Estancia de investigación en el MIT (Massachusetts Institute of Technology) - Photovoltaic Research Laboratory
5: (2016)
Estancia de investigación post-doctoral del Dr. José Almeida Silva
6: (2016)
Estancia de investigación post-doctoral del Dr. José Almeida Silva
7: (2016)
Estancia de la Prof. Izete Zanesco
8: (2016)
Estancia del Prof. Adriano Moehlecke
8 Tesis Doctorales
1: (2007)
Desarrollo de un reactor epitaxial de alta capacidad de producción para la fabricación de células solares
2: (2007)
Fabricación de células solares sobre silicio multicristalino y silicio purificado por la vía metalúrgica
3: (2009)
Autor: Jorge Coello Rodriguez Nuevos Procesos de fabricación para células solares de silicio para aplicaciones bifaciales y de concentración
4: (2009)
Convertidores Fotónicos para células solares bifaciales de silicio
5: (2010)
CHEMICAL DECOMPOSITION OF SILANES FOR THE PRODUCTION OF SOLAR GRADE SILICON
6: (2011)
Defect engineering strategies for solar grade silicon and their optimization by predictive simulation.
7: (2015)
Understanding and improving the chemical vapor deposition process for solar grade silicon production
8: (2017)
Gettering and defect engineering techniques for low cost and high efficiency industrial crystalline silicon solar cells
Difusión de Resultados de Investigación
74 Artículos en revistas
1: (2007)
Modifying the solar spectrum to enhance silicon solar cell efficiency - An overview of available materials
2: (2007)
Temperature homogeneity of polysilicon rods in a Siemens reactor
3: (2008)
Chemical Vapor Deposition Model of Polysilicon in a Trichlorosilane and Hydrogen System
4: (2008)
Implementation of a Monte Carlo method to model photon conversion for solar cells
5: (2009)
Acceptable contamination levels in solar grade silicon: From feedstock to solar cell
6: (2009)
Characterization of up-converter layers on bifacial silicon solar cells
7: (2009)
Crystalline silicon solar module technology: Towards the 1? per watt-peak goal
8: (2010)
Enhancement of up-conversion efficiency by combining rare earth-doped phosphors with PbS quantum dots
9: (2010)
Study of internal versus external gettering of iron during slow cooling processes for silicon solar cell fabrication
10: (2010)
The impact of silicon feedstock on the PV module cost
11: (2011)
Enhanced iron gettering by short, optimized low-temperature annealing after phosphorus emitter diffusion for industrial silicon solar cell processing
12: (2011)
Impurity-to-efficiency simulator: predictive simulation of silicon solar cell performance based on iron content and distribution
13: (2011)
Iron distribution in silicon after solar cell processing: Synchrotron analysis and predictive modeling
14: (2011)
Radiative energy loss in a polysilicon CVD reactor
15: (2011)
Towards the tailoring of P diffusion gettering to as-grown silicon material properties
16: (2012)
Defect engineering during the contact co-firing step in an industrial belt furnace
17: (2012)
Engineering metal precipitate size distributions to enhance gettering in multicrystalline silicon
18: (2012)
Exploring polysilicon deposition conditions through a laboratory CVD prototype
19: (2012)
TCAD for PV: A fast method for accurately modelling metal impurity evolution during solar cell processing.
20: (2012)
TCAD for PV: A fast method for accurately modelling metal impurity evolution during solar cell processing.
21: (2013)
About the origin of low wafer performance and crystal defect generation on seed-cast growth of industrial mono-like silicon ingots
22: (2013)
Precipitated iron: A limit on gettering efficacy in multicrystalline silicon
23: (2013)
Radiation heat savings in polysilicon production: Validation of results through a CVD laboratory prototype
24: (2014)
About the origin of low wafer performance and crystal defect generation on seed-cast growth of industrial mono-like silicon ingots
25: (2014)
About the origin of low wafer performance and crystal defect generation on seed-cast growth of industrial mono-like silicon ingots
26: (2014)
Heat losses in a CVD reactor for polysilicon production: Comprehensive model and experimental validation
27: (2014)
Heat losses in a CVD reactor for polysilicon production: Comprehensive model and experimental validation
28: (2014)
Induced Thermo-Mechanical Stress In CPV Receivers With Cycled High Intensity Light
29: (2014)
Induced thermo-mechanical stress in CPV receivers with cycled high intensity light
30: (2014)
Lifetime improvement after phosphorous diffusion gettering on upgraded metallurgical grade silicon
31: (2014)
Lifetime improvement after phosphorous diffusion gettering on upgraded metallurgical grade silicon
32: (2015)
Building intuition of iron evolution during solar cell processing through analysis of different process models
33: (2015)
Building intuition of iron evolution during solar cell processing through analysis of different process models
34: (2015)
Combined impact of heterogeneous lifetime and gettering on solar cell performance
35: (2015)
Deposition reactors for solar grade silicon: A comparative thermal analysis of a Siemens reactor and a fluidized bed reactor
36: (2015)
Deposition reactors for solar grade silicon: A comparative thermal analysis of a Siemens reactor and a fluidized bed reactor
37: (2015)
Effect of electrically inactive phosphorus versus electrically active phosphorus on iron gettering
38: (2015)
Effect of electrically inactive posphorus versus electrically active phosphorus oniron gettering
39: (2015)
Ultra-dense energy storage utilizing high melting point metallic alloys and photovoltaic cells
40: (2016)
A 3 Terminal Parallel Connected Silicon Tandem Solar Cell
41: (2016)
A 3 terminal parallel connected silicon tandem solar cell
42: (2016)
High-Performance and Traditional Multicrystalline Silicon: Comparing Gettering Responses and Lifetime-Limiting Defects
43: (2016)
High-Performance and Traditional Multicrystalline Silicon: Comparing Gettering Responses and Lifetime-Limiting Defects
44: (2016)
Inorganic Photovoltaics - Planar and Nanostructured Devices
45: (2016)
Inorganic photovoltaics - Planar and nanostructured devices
46: (2016)
Material requirements for the adoption of unconventional silicon crystal and wafer growth techniques for high-efficiency solar cells
47: (2016)
Material requirements for the adoption of unconventional silicon crystal and wafer growth techniques for high-efficiency solar cells
48: (2016)
Optimizing phosphorus diffusion for photovoltaic applications: Peak doping, inactive phosphorus, gettering, and contact formation
49: (2016)
Optimizing phosphorus diffusion for photovoltaic applications: Peak doping, inactive phosphorus, gettering, and contact formation
50: (2016)
Thermal Shields for Heat Loss Reduction in Siemens-Type CVD Reactors
51: (2016)
Thermal shields for heat loss reduction in Siemens-type CVD reactors
52: (2016)
Thin Absorbers for Defect-Tolerant Solar Cell Design
53: (2016)
Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversion
54: (2016)
Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversion
55: (2016)
Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversionUltra high temperature latent heat energy storage and thermophotovoltaic energy conversion
56: (2016)
Upgrading the Silicon IBC to the 40
efficiency
57: (2017)
Electrically-inactive phosphorus re-distribution during low temperature annealing
58: (2017)
Electrically-inactive phosphorus re-distribution during low temperature annealing
59: (2017)
Electrically-inactive phosphorus re-distribution during low temperature annealing
60: (2017)
Impact of Extended Contact Cofiring on Multicrystalline Silicon Solar Cell Parameters
61: (2017)
Impact of extended contact cofiring on multicrystalline silicon solar cell parameters
62: (2017)
Thin silicon solar cells: Pathway to cost-effective and defect-tolerant cell design
63: (2017)
Thin silicon solar cells: Pathway to cost-effective and defect-tolerant cell design
64: (2018)
A One Step Method to Produce Boron Emitters
65: (2018)
AMADEUS: Next Generation Materials and Solid State Devices for Ultra High Temperature Energy Storage and Conversion
66: (2018)
Electrically-inactive phosphorus re-distribution during low temperature annealing
67: (2018)
Laser-diffused P emitters for Ge TPV cells
68: (2018)
Molten Silicon Storage of Concentrated Solar Power with Integrated Thermophotovoltaic Energy Conversion
69: (2018)
Phosphorus Diffusion Gettering Efficacy in Upgraded Metallurgical-Grade Solar Silicon
70: (2018)
Semiconductor parameter extraction via current-voltage characterization and Bayesian inference methods
71: (2019)
Citizens on the driving seat of Photovoltaics
72: (2019)
Germanium photovoltaic cells with MoOx hole-selective contacts
73: (2019)
Techno-economic analysis of solar PV power-to-heat-to-power storage and trigeneration in the residential sector
74: (2019)
Techno-economic analysis of solar PV power-to-heat-to-power storage and trigeneration in the residential sector
1 Capítulos de libros
1: (2016)
Purity requirements for silicon in PV applications
14 Conferencias invitadas en congresos
1: (2009)
CENTESIL: A pilot plant for R&D on polysilicon
2: (2010)
Avances tecnológicos en materia fotovoltaica
3: (2010)
Defect engineering in multicrystalline silicon: from descriptive to predictive
4: (2010)
La Energía Solar: Proyecto de sostenibilidad y eficiencia energética. Las nuevas tecnologías eficientes al servicio de empresas y ciudadanos
5: (2010)
Present and future of Photovoltaic Solar Electricity
6: (2010)
Ultrapurification of silicon for photovoltaic applications
7: (2011)
R&D on crystalline silicon technology: From metallurgical silicon to the PV module
8: (2012)
Present and Future of Photovoltaic Solar Electricity
9: (2013)
Present and future of photovoltaic solar electricity
10: (2013)
Present and future of photovoltaic solar electricity
11: (2015)
Is silicon the ultimate photovoltaic material? (Mechanical Engineering Lecture in Energy)
12: (2015)
Vertically Integrated Defect Engineering for Photovoltaics
13: (2018)
Adaptación de procesos de fabricación de células solares a silicio de bajo coste
14: (2018)
Laser-diffused P emitters for Ge TPV cells
5 Cursos, seminarios y tutoriales
1: (2008)
Máster en Energía Solar Fotovoltaica
2: (2008)
Programa de Doctorado en Energía Solar Fotovoltaica
3: (2010)
Máster en Energía Solar Fotovoltaica
4: (2010)
Master Universitario en Energi¿a Solar Fotovoltaica
5: (2016)
Capacidades tecnológicas españolas en energía solar fotovoltaica
2 Otras Publicaciones
1: (2017)
Optimization of a-Si:H possivating layer deposited by PECVD on c-Si
2: (2018)
Putting Open Science into action in the photovoltaic sector
62 Ponencia en Congresos
1: (2007)
Application of optimized SiNx:H double layer anti-reflection coatings on multicrystalline silicon solar cells
2: (2007)
Approach to Si CVD reactor modeling
3: (2007)
Effect of thickness on bifacial silicon solar cells
4: (2007)
Effect of thickness on bifacil silicon solar cells
5: (2007)
Implementation of a montecarlo method to model photon conversion for solar cells
6: (2007)
Increase on Siemens Reactor Throughput by Tailoring temperature profile of polysilicon rods
7: (2007)
Increase on siemens reactor throughput by tailoring temperature profile of polysilicon rods
8: (2007)
Optimisation of SiNx : H anti-reflection coatings for silicon solar cells
9: (2007)
Optimisation of SiNx:H anti-refelction coatings for silicon solar cells
10: (2007)
Reduction in thermal load in the fabrication process of bifacil silicon solar cells
11: (2007)
Reduction of thermal load in the fabrication process of bifacial silicon solar cells
12: (2007)
The effect of RF and MW power on the SiNx films grown by PECVD
13: (2007)
The effect of RF and MW power on the SiNx films grown by pecvd
14: (2007)
Thin bifacial silicon solar cells
15: (2008)
Acceptable contamination levels in solar grade silicon: From feedstock to solar cell
16: (2008)
Characterization of up-converters layer on bifacial silicon solar cells
17: (2008)
SOLAR CELL PROCESS DEVELOPMENT IN THE EUROPEAN INTEGRATED PROJECT CRYSTALCLEAR
18: (2008)
Validation of a chemical vapour deposition model for polysilicon by a lab reactor
19: (2008)
1 ? PER WATT-PEAK ADVANCED CRYSTALLINE SILICON MODULES: THE CRYSTALCLEAR INTEGRATED PROJECT
20: (2009)
Improvement of multi-crystalline silicon wafer quality during solar cell fabrication process
21: (2009)
Polysilicon deposition by trichlorosilane decomposition
22: (2009)
Quantum efficiency measurement setup for the near-infrared range
23: (2009)
Solar grade silicon production through trichlorosilane decomposition
24: (2010)
CENTESIL: An independent research centre on polysilicon
25: (2010)
Disclosing the polysilicon deposition process
26: (2010)
Enhanced impurity reduction during short extended P diffusion gettering for industrial solar cell processing
27: (2010)
How to diminish the radiation loss in a Siemens-type reactor
28: (2010)
Improving up-conversion with PBS quantum dots
29: (2010)
Impurity-to-efficiency simulator: Predictive simulation of solar cell efficiencies based on measured metal distribution and cell processing conditions
30: (2010)
Synchrotron-based microanalysis of iron distribution after thermal processing and predictive modeling of resulting solar cell efficiency
31: (2011)
Dissolution and gettering of iron during contact co-firing
32: (2011)
Mono-crystalline silicon wafers manufactured by casting methods: Optoelectronic, structural and solar cell study
33: (2012)
Exploring polysilicon deposition conditions through a laboratory CVD prototype
34: (2012)
On track for Solar Grade Silicon through a Siemens process-type laboratory reactor: operating conditions and energy savings
35: (2012)
Progress on Optimization of the Solar Cell Fabrication Process by Impurity-to-Efficiency Predictive Simulator
36: (2012)
Progress on the development of a technology for silicon purification
37: (2014)
Analysis of thermo-mechanical stress effects on CPV receiver under high intensity light cycles
38: (2014)
First solar cells on silicon sheets crystallized by electric Molten Zone
39: (2014)
Quantifying heat losses by radiation, convection and conduction in a CVD reactor for polysilicon production
40: (2015)
All-Silicon Energy Storage (ASES)
41: (2015)
Combined impact of heterogeneous lifetime and gettering on solar cell performance
42: (2015)
Dissolution of electrically inactive phosphorus by low temperature annealing
43: (2015)
Effect of electrically inactive posphorus versus electrically active phosphorus oniron gettering
44: (2015)
Ultra-Dense Energy Storage utilizing high melting point metallic alloys and photovoltaic cells
45: (2015)
Ultra-dense energy storage utilizing high melting point metallic alloys and photovoltaic cells
46: (2015)
2-D and 3-D TCAD simulations of defect-tolerant solar cell architectures
47: (2016)
Innovation Brought by FP7-CHEETAH Project in Management of Knowledge Exchange for PV RTD
48: (2016)
The IBC structure as support for three band-gaps tandem devices
49: (2016)
Thin absorbers for defect-tolerant solar cell design
50: (2016)
Upgrading the silicon IBC to the 40% efficiency
51: (2017)
AMADEUS: Next Generation Materials and Solid State Devices for Ultra High Temperature Energy Storage and Conversion
52: (2017)
AMADEUS: Next Generation Materials and Solid State Devices for Ultra High Temperature Energy Storage and Conversion
53: (2017)
FP7-CHEETAH Knowledge Exchange Platform: Results and their Exploitation
54: (2017)
Thin absorbers for defect-tolerant solar cell design
55: (2017)
Upgrading the silicon IBC to the 40 % efficiency
56: (2018)
AMADEUS: Almacenamiento y conversión de energía a muy alta temperatura
57: (2018)
Laser-diffused P emitters for Ge TPV cells
58: (2018)
MÁSTER EN ENERGÍA SOLAR FOTOVOLTAICA DE LA UNIVERSIDAD POLITÉCNICA DE MADRID: BALANCE Y REFLEXIONES DE 10 AÑOS DE UN POSGRADO FOTOVOLTAICO
59: (2018)
Molten silicon at the hearth of a novel energy storage system
60: (2018)
Semiconductor parameter extraction via current-voltage characterization and Bauesian inference methods
61: (2019)
Citizens on the driving seat of Photovoltaics
62: (2019)
Open Science: New challenges and opportunities for the PV sector
Explotación de Resultados y Transferencia de Tecnología
7 Patentes
1: (2010)
Escudos térmicos para reactores de producción de silicio
2: (2014)
Electric Energy Storage System
3: (2014)
Electric Energy Storage System
4: (2016)
Convertidor híbrido termiónico-fotovoltaico
5: (2016)
Convertidor híbrido termiónico-fotovoltaico
6: (2017)
Acumulador y convertidor de energía solar térmica
7: (2018)
Célula fotovoltaica, panel fotovoltaico y método de fabricación de células fotovoltaicas
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2022 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
