Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
RESEARCHERS
RDI STRUCTURES
RESEARCH ACTIVITIES
INNOVATION
Investigador
Miguel Morales Furio
Researcher Category
TITULAR UNIVERSIDAD
Role
SUBDIRECTOR DE CENTRO DE INVESTIGACIÓN.
UPM Centre
E.T.S. DE INGENIEROS INDUSTRIALES
Department:
FÍSICA APLICADA E INGENIERÍA DE MATERIALES (N)
Research Centre/Institute
CENTRO LASER
Knowledge Area
INGENIERIA MECANICA
Research Group:
Manufactura Avanzada con Láser
Email
miguel.morales
upm.es
Phone
910677009
Research Reports
Proyectos de I+D+i y generación de recursos
80 Proyectos de I+D+i
1: (2007)
Acción Complementaria PHODYE
2: (2007)
ALELLA. Alternativas electroquímicas, laser, CVD Y EPO para la generación y mejora de recubrimientos sustitutivos de los de metales pesados.
3: (2007)
Desarrollo e instrumentación de un sistema de medición remota para la vigilancia y control de gases contaminantes en entornos urbanos.
4: (2007)
EULASNET II European Laser Technology and Applications Network
5: (2007)
MARCADO MASAS PATRÓN
6: (2007)
MICROMANUFACTURING. Desarrollo de Tecnologías de Microfabricación innovadoras para la generación de nuevos negocios e incremento de la competitividad de la industria española en mercados incipientes.
7: (2007)
MICROSIL08. Diseño e industrialización de módulos fotovoltaicos en silicio de capa fina.
8: (2007)
Multiplicación de esfuerzos para el desarrollo, innovación, optimización y diseño de invernaderos avanzados (Mediodía).
9: (2007)
PHODYE. New photonic systems on a chip based on dyes for sensor applications scalable at wafer fabrication.
10: (2007)
SHOCKLAS-3. Desarrollo, instrumentación y caracterización experimental de aplicaciones de la tecnología de tratamiento superficial de materiales metálicos por ondas de choque generadas por láser.
11: (2007)
SURFLAS. Desarrollo e instrumentación industrial de técnicas avanzadas ambientalmente sostenibles de tratamiento superficial de materiales metálicos con láser como método de mejora de sus propiedades mecánicas y comportamiento en servicio.
12: (2008)
ALTERNATIVAS ELECTROQUIMICAS, LASER, CVD, Y EOP PARA LA GENERACION Y MEJORA DE RECUBRIMIENTOS SUSTITUTIVOS DEL CROMO DURO. ALELLA
13: (2008)
ANALISIS INTEGRADO TEORICO EXPERIMENTAL DE PROCESOS DE TATAMIENTO DE CHOQUE POR LASER DE COMPONENTES METALICOS
14: (2008)
AYUDA DE INFRAESTRUCTURAS PARA EL LABORATORIO DE ENSAYO Y CARACTERIZACION DE MATERIALES /CENTRO LASER
15: (2008)
EUREKA HICARLAW E 3209. DESARROLLO E INSTRUMENTACION INDUSTRIAL DE PROCESOS DE SOLDADURA LASER REMOTA A ELEVADA VELOCIDAD DE COMPONENTES DE AUTOMOCION
16: (2008)
LEONARDO DA VINCI CONTRACT LASTED.NET
17: (2008)
MICROMANUFACTURING-MICROFORM
18: (2008)
MICROMANUFACTURING-MICROLASELEC
19: (2008)
PARTICIPACIÓN EN MULTIPLICACIÓN DE ESFUERZOS PARA EL DESARROLLO, INNOVACIÓN, OPTIMIZACIÓN Y DISEÑO DE IVNRNADEROS AVANZADOS (MEDIODIA).
20: (2008)
PHODYE - NEW PHOTONIC SYSTEMS ON A CHIP BASED ON DYES FOR SENSOR APPLICATIONS SCALABLE AT WAFER FABRICATION.
21: (2008)
SIMULACIÓN Y CONTROL DE PROCESOS DE TRATAMIENTO SUPERFICIAL POR LÁSER SURFLAS-SC
22: (2009)
ACCIÓN COMPLEMENTARIA DEL PROYECTO EUROPEO PHODYE
23: (2009)
ALTERNATIVAS ELECTROQUÍMICAS, LÁSER, CVD Y EOP PARA LA GENERACIÓN Y MEJORA DE RECUBRIMIENTOS SUSTITUTIVOS DE LOS DE METALES PESADOS. (ALELLA )
24: (2009)
ANÁLISIS INTEGRADO TEÓRICO-EXPERIMENTAL DE PROCESOS DE TRATAMIENTO DE CHOQUE POR LÁSER DE COMPONENTES METÁLICOS (SHOCKLAS+)
25: (2009)
AYUDAS PARA LA CONTRATACION DE PERSONAL TECNICO DE APOYO DE JUAN ANTONIO PORRO GONZALEZ
26: (2009)
CONTRACT N. 033793 - PHODYE - NEW PHOTONIC SYSTEMS ON A CHIP BASED ON DYES FOR SENSOR APPLICATIONS SCALABLE AT WAFER FABRICATION.
27: (2009)
Desarrollo de procesos de Microfabricación con Láser
28: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
29: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
30: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
31: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
32: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
33: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
34: (2009)
LA EXCELENCIA ESPAÑOLA EN RAPID MANUFACTURING. DESARROLLO Y APLICACIÓN DE LA TECNOLOGÍA DE DEFORMACIÓN INCREMENTAL DE SEGUNDA GENERACIÓN PARA APLICACIONES
35: (2009)
LASER TECHNOLOGY EDUCATIONAL NETWORK (LASTED.NET) LEONARDO DA VINCI CONTRACT 2001 VIR004
36: (2009)
MICROMANUFACTURING PSE-020400-2006-1
37: (2009)
MICROMANUFACTURING DESARROLLO DE TECNOLOGIAS DE MICROFABRIC. INNOVADORAS PARA LA GENERACION.... PSE-020400-2007-2
38: (2009)
MICROMANUFACTURING; DESARROLLO DE TECNOLOGIAS DE MICROFABRICAION INNOVADORAS PARA LA GENERACION DE NUEVOS NEGOCIOS Y EL INCREMENTO PSE-020400-2007-2
39: (2009)
MICROMANUFACTURING,PSE-420000-2008-2
40: (2009)
MICROMANUFACTURING,PSE-420000-2008-2
41: (2009)
MULTIPLICACIÓN DE ESFUERZOS PARA EL DESARROLLO, INNOVACIÓN, OPTIMIZACIÓN Y DISEÑO DE INVERNADEROS AVANZADOS (MEDIODIA)
42: (2009)
REPAIR SCRIBE MARK DAMAGES BY LASER SHOCK PEENING
43: (2009)
TALLER DE PRECISION Y CENTRO ELECTROTECNICO DE ARTILLERIA
44: (2010)
ANALISIS INTEGRADO TEORICO EXPERIMENTAL DE PROCESOS DE TATAMIENTO DE CHOQUE POR LASER DE COMPONENTES METALICOS
45: (2011)
ISF 2G. La excelencia española en Rapid Manufacturing. Desarrollo y aplicación de la tecnología de deformación incremental de segunda generación, para aplicaciones estratégicas.
46: (2011)
CORTE DE SUBSTRATOS METÁLICOS PARA APLICACIONES FOTOVOLTAICAS
47: (2011)
DESARROLLO DE PROCESOS PARA FORMACIÓN DE CONTACTOS CON LÁSER PARA MÓDULOS THIN FILM CIGS PARA APLICACIONES FOTOVOLTAICAS
48: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
49: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
50: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
51: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
52: (2011)
ESTUDIO SOBRE GENERACION DE ONDAS ULTRASÓNICAS MEDIANTE TECNOLOGÍA BASADA EN LÁSER PARA SISTEMAS DE INSPECCIÓN MULTIFUNCIONALES DE RÁPIDO DESPLIEGUE BASADOS EN R
53: (2011)
MICROMANUFACTURING; DESARROLLO DE TECNOLOGIAS DE MICROFABRICAION INNOVADORAS PARA LA GENERACION DE NUEVOS NEGOCIOS Y EL INCREMENTO PSE-020400-2007-2
54: (2011)
SIMULACION DE PROCESOS LASER EN LA INDUSTRIA FOTOVOLTAICA
55: (2012)
CORTE DE SUBSTRATOS METÁLICOS PARA APLICACIONES FOTOVOLTAICAS
56: (2012)
DESARROLLO DE PROCESOS PARA FORMACIÓN DE CONTACTOS CON LÁSER PARA MÓDULOS THIN FILM CIGS PARA APLICACIONES FOTOVOLTAICAS
57: (2012)
INNDISOL. SUBPROG INNPACTO.
58: (2012)
MICROMANUFACTURING,PSE-420000-2008-2
59: (2012)
SIMULACION DE PROCESOS LASER EN LA INDUSTRIA FOTOVOLTAICA
60: (2012)
TECNOLOGÍA FOTOVOLTAICA DE THIN FILM CIGS
61: (2013)
APPOLO
62: (2013)
APPOLO
63: (2013)
APPOLO: Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
64: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
65: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
66: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
67: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
68: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
69: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
70: (2013)
DESARROLLO DE PROCESOS LÁSER PARA EJECUTAR PROCESOS DE METALIZACIÓN CON LÁSER EN DISPOSITIVOS FOTOVOLTAICOS BASADOS EN TECNOLOGÍA CIGS:PARTE II
71: (2013)
REALIZACIÓN DE 200 PROBETAS DE ACERO (130 UM) DE 2,5 X 7 CM 2 MEDIANTE CORTE LÁSER
72: (2013)
SIMULACION DE PROCESOS LASER EN LA INDUSTRIA FOTOVOLTAICA
73: (2013)
Tecnología fotovoltaica de Thin Films CIGS
74: (2013)
Tecnología fotovoltaica de Thin Films CIGS
75: (2013)
Tecnología fotovoltaica de Thin Films CIGS
76: (2013)
Tecnología fotovoltaica de Thin Films CIGS
77: (2014)
DESARROLLO DE PROCESOS LÁSER PARA EJECUTAR PROCESOS DE METALIZACIÓN CON LÁSER EN DISPOSITIVOS FOTOVOLTAICOS BASADOS EN TECNOLOGÍA CIGS:PARTE II
78: (2014)
TECNOLOGÍA FOTOVOLTAICA DE THIN FILM CIGS
79: (2015)
SIMLASPV-MET: Simulación de nuevos procesos de metalización de células fotovoltaicas con láser
80: (2016)
REALIZACIÓN DE ENSAYOS DE PROCESOS DE ABLACIÓN DE HUESO
Formación de Investigadores y Movilidad
2 Estancias y sabáticos recogidos en programas oficiales
1: (2014)
Princeton University - Estudio experimental y simulación de procesos de transferencia de material con láser
2: (2016)
Simulación de nuevos procesos de metalización de células fotovoltaicas con láser
2 Tesis Doctorales
1: (2016)
Desarrollo de procesos para formación de contactos con láser para módulos thin film CIGS para aplicaciones fotovoltaicas
2: (2016)
Desarrollo de procesos para formación de contactos con láser para módulos thin film CIGS para aplicaciones fotovoltaicas
Difusión de Resultados de Investigación
84 Artículos en revistas
1: (2007)
Advanced 3D micromachining techniques using UV laser sources.
2: (2007)
Generación de un campo de tensiones residuales en compresión en aluminio 2024-t351 mediante tratamiento por onda de choque generada por láser (Laser Shock Processing).
3: (2007)
Laser Shock Processing as a Method for the Improvement of Metallic Materials Surface Properties: A Discusion on the Influence of Combined Mechanical and Thermal Effects.
4: (2007)
New techniques for laser microprocessing of photovoltaic devices based on thin-film a-Si:H
5: (2007)
Optical characterization of extremely small volumes of liquid in sub-micro-holes by simultaneous reflectivity, ellipsometry and spectrometry.
6: (2007)
Short pulse laser microforming of thin metal sheets for MEMS manufacturing.
7: (2008)
Análisis de la Influencia de los Parámetros Operacionales en Recubrimientos Superficiales Asistidos por Láser de Acero AISI 431 sobre Acero al Carbono
8: (2008)
Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser
9: (2008)
Diseño de un Sistema de Monitorización y Control de Procesos de Tratamiento Térmico Superficial de Materiales con Láser Mediante Realimentación de Estados
10: (2008)
Laser shock processing as a method of decreasing fatigue of a die-casting die made of maraging steel
11: (2008)
Metrología óptica dimensional submicrométrica para determinación de espesores en sub-micro estructuras
12: (2008)
Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns
13: (2008)
Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing
14: (2008)
Optimización de Procesos de Inducción de Tensiones Residuales en Compresión en Materiales Metálicos por Ondas de Choque Generadas por Láser
15: (2008)
Simultaneous Reflectivity, Ellipsometry and Spectrometry Measurements in Submicron Structures for Liquid Sensing
16: (2008)
3D Laser Micromachining Applications Development on a Dual ns Laser Based Processing System
17: (2009)
Adaptive neural network control system for laser surface heat treatments
18: (2009)
Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies
19: (2009)
Laser shock microforming of thin metal sheets
20: (2009)
Laser shock processing of metallic materials. Prospects for application to release the residual stresses in FSW joints
21: (2009)
Nanosecond laser shock microforming of thin metal components
22: (2009)
Numerical simulation of plasma dynamics in laser shock processing experiments
23: (2009)
Optical characterization of the heat-affected zone in laser patterning of thin a-Si:H
24: (2009)
Optical observation of shock waves and cavitation bubbles in high intensity laser-induced shock processes
25: (2009)
Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H
26: (2010)
Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-t351
27: (2010)
Biochips para detectar enfermedades
28: (2010)
C. BARRIOS, M. HOLGADO BOLAÑOS, MF. LAGUNA HERAS,F.J, SANZA GUTIERREZ, R. CASQUEL DEL CAMPO,C.L. MOLPECERES ALVAREZ, M. MORALES FURIO "Biochips para detectar enfermedades" Revista UPM Universidad Politécnica de Madrid, 2010
29: (2010)
C.A.BARRIOS, M. HOLGADO, M.F.LAGUNA, R. CASQUEL, F.J. SANZA, A. LAVÍN, C. MOLPECERES, M. MORALES, D. LOPEZ-ROMERO "Los biochips fotónicos facilitarán los diagnósticos" Revista UPM de la Universidad Politécnica de Madrid, 18, 12-15 (2010)
30: (2010)
Induction of Engineered Residual Stresses Fields and Associate Surface Properties Modification by Short Pulse Laser Shock Processing
31: (2010)
Laser Shock Processing of 6061-T6 Al alloy with 1064 nm and 532 nm wavelengths
32: (2010)
Los biochips fotónicos facilitarán los diagnósticos
33: (2010)
Numerical Thermo-Mechanical Modelling Of Stress Fields and Residual Constraints in Metallic Targets Subject To Laser Shock Processing
34: (2010)
Thermomechanical Modelling of Stress Fields in Metallic Targets Subject to Laser Shock Processing
35: (2010)
Tratamiento de materiales metálicos por ondas de choque generadas por láser, como método de mejora de sus propiedades mecánicas superficiales
36: (2011)
A Virtual Laboratory for Laser Transformation Hardening
37: (2011)
A Virtual Laboratory for Laser Transformation Hardening
38: (2011)
Coupled RS's Fields and Deformation Control in the Laser Shock Processing of Thin Sheets for Fatigue Life Improvement
39: (2011)
Coupled Theoretical-Experimental Characterization of Plasma Dynamics and Thermo-Mechanical Wave Generation in Laser Shock Processing
40: (2011)
Effect of laser shock processing on fatigue crack growth of duplex stainless steel
41: (2011)
Effect of plasma confinement on laser shock microforming of thin metal sheets
42: (2011)
Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies
43: (2011)
Laser Shock Microforming of Thin Metal Sheets with ns Lasers
44: (2011)
Laser Shock Microforming of Thin Metal Sheets with ns Lasers
45: (2011)
Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys
46: (2011)
Numerical simulation of laser ablation for photovoltaic materials
47: (2011)
Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts
48: (2011)
Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts
49: (2011)
The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens
50: (2011)
The Role of Short Pulse High Intensity Lasers in Material Surface Properties Modification and MEMS Manufacturing
51: (2012)
Estimation of Local Crystallization of a-Si:H Thin Films by Nanosecond Pulsed Laser Irradiation Through Local Temperature Simulation
52: (2012)
Estimation of local crystallization of a-Si:H thin films by nanosecond pulsed laser irradiation through local temperature simulation
53: (2012)
Fatigue in laser shock peened open-hole thin aluminium specimens
54: (2012)
Fatigue in laser shock peened open-hole thin aluminium specimens (vol 534, pg 573, 2012)
55: (2012)
Influence of wavelength on laser doping and laser-fired contact processes for c-Si solar cells
56: (2012)
Influence of wavelength on laser doping and laser-fired contact processes for c-Si solar cells
57: (2012)
Laser Ablation Modelling of Aluminium, Silver and Crystalline Silicon for Applications in Photovoltaic Technologies
58: (2012)
Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing
59: (2012)
Mechanical properties enhancement of high reliability metallic materials by laser shock processing
60: (2012)
Numerical simulation of laser ablation for photovoltaic materials
61: (2012)
Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts
62: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
63: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
64: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
65: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
66: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
67: (2012)
Physical characterization of laser interaction and shock generation in laser shock processing. Coupled theoretical-experimental analysis
68: (2013)
Analysis of wavelength influence on a-Si crystallization processes with nanosecond laser sources
69: (2013)
Comparative analysis of laser generated P2 processes for a-Si:H modules and their electrical influence on the final device
70: (2013)
Laser shock processing: An emerging technique for the enhancement of surface properties and fatigue life of high-strength metal alloys
71: (2013)
LASER SHOCK PROCESSING: AN EMERGING TECHNIQUE FOR THE IMPROVEMENT OF FATIGUE LIFE AND SURFACE PROPERTIES OF HIGH RELIABILITY METALLIC COMPONENTS
72: (2013)
New laser-based approaches to improve the passivation and rear contact quality in high efficiency crystalline silicon solar cells
73: (2014)
Silicon PV module customization using laser technology for new BIPV applications
74: (2014)
Study of a-Si crystallization dependence on power and irradiation time using a CW green laser
75: (2015)
Analysis by finite element calculations of light scattering in laser- textured AZO films for PV thin-film solar cells
76: (2015)
Analysis by finite element calculations of light scattering in laser-textured AZO films for PV thin-film solar cells
77: (2015)
High volume transfer of high viscosity silver pastes using Laser Direct-Write Processing for metallization of c-Si cells
78: (2015)
Parameterization of a-Si crystallization by continuous-wave green laser irradiation: from single spot to large area
79: (2016)
Influence of the acceptor roughness on the aspect ratio of silver paste lines printed by laser-induced forward transfer
80: (2016)
Laser based processes for product customization in Building Integrated Photovoltaics (PV)
81: (2016)
Laser Induced Forward Transfer of High Viscosity Silver Paste for New Metallization Methods in Photovoltaic and Flexible Electronics Industry
82: (2016)
Laser induced forward transfer of high viscosity silver paste for new metallization methods in photovoltaic and flexible electronics industry
83: (2016)
Laser-induced forward transfer of high-viscosity silver pastes
84: (2016)
Laser-induced forward transfer of high-viscosity silver pastes
16 Capítulos de libros
1: (2007)
Surface Microstructuring by High Intensity Laser Pulses
2: (2008)
Application of Laser Shock Processing System by Underwater Irradiation (1064 nm) in Metal Surface
3: (2008)
DESARROLLO Y CARACTERIZACIÓN DE PROCESOS DE MICROCONFORMADO DE MATERIALES METÁLICOS MEDIANTE PULSOS LÁSER EN EL DOMINIO DE NANOSEGUNDOS
4: (2008)
Modelling of Laser Ablation Processes for Applications in Thin Film Photovoltaic Technology
5: (2008)
Sub-micro holes sensing cells analyzed by Fourier Transform IR-Visible Spectrometry for biochemical sensing.
6: (2008)
TRATAMIENTO DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER
7: (2008)
TRATAMIENTO SUPERFICIAL DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER COMO MÉTODO DE MEJORA DE SUS PROPIEDADES MÉCANICAS
8: (2008)
UV Laser Selective Ablation of Photovoltaic Materials for Monolithic Interconnection of Devices Based on a-Si:H
9: (2008)
Vertical resonant microcativites based on pillars analyzed by Beam Profile Ellipsometry and Reflectometry.
10: (2009)
Design issues of engineered residual stress fields and associate surface properties modification by LSP in al and ti alloys
11: (2009)
Engineered Residual Stress Fields and Associated Mechanical Properties Enhancement in Metallic Alloys Induced by Laser Shock Processing
12: (2010)
Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues
13: (2010)
LASER SHOCK PROCESSING TO IMPROVE THE RELIABILITY OF WELDED METAL STRUCTURES
14: (2011)
Improvement of mechanical properties and life extension of high reliability structural components by laser shock processing
15: (2014)
Induction of thermo-mechanical residual stresses in metallic materials by laser shock processing
16: (2014)
Laser Plasma Interaction and Shock Material Processing
28 Conferencias invitadas en congresos
1: (2007)
Surface Microstructuring by High Intensity Laser Pulses
2: (2008)
Application of high intensity short pulse lasers to precision micromanufacturing
3: (2008)
PREDICTIVE ASSESSMENT OF PLASMA DYNAMICS EFFECTS ON THE SHOCK TRANSFORMATION OF METALLIC ALLOYS BY LASER SHOCK PROCESSING
4: (2008)
Scientific and Technological Issues on the Application of High Intensity Lasers to Material Properties Modification: The case of Laser Shock Processing of Metallic Alloys
5: (2009)
Engineered residual stress fields and associated mechanical properties enhancement in metallic alloys induced by laser shock processing
6: (2009)
Induction of engineered residual stresses fields and associate surface properties modification by short pulse laser shock processing
7: (2009)
Numerical thermo-mechanical modelling of stress fields and residual constraints in metallic targets subject to laser shock processing
8: (2009)
Theoretical modelling and experimental characterization of effects induced in metallic materials by ns-pulse, gw/cm2-level laser shock processing
9: (2010)
Laser Shock Processing: A technique for the improvement of surface mechanical properties of high reliability metallic alloys
10: (2010)
Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues
11: (2010)
Theoretical-Experimental Assessment of the Improvement of Surface Properties of Metallic Alloys Obtained by Laser Shock Processing
12: (2010)
2D/3D Micromachining Processes with UV Short Pulse Lasers for Industrial Manufacturing
13: (2011)
Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing
14: (2011)
Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys
15: (2011)
Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing
16: (2011)
The Role of Short Pulse High Intensity Lasers in Material Surface Properties Modification and MEMS Manufacturing
17: (2012)
Application of High-Intensity Short-Pulse Lasers to the Mechanical and Surface Properties Improvement of High Reliability Metallic Components by Shock Processing
18: (2012)
Influence of wavelength on laser doping and laser-fired contact processes for c-Si solar cells
19: (2012)
LASER SHOCK PROCESSING: AN EMERGING TECHNIQUE FOR THE IMPROVEMENT OF FATIGUE LIFE AND SURFACE PROPERTIES OF HIGH RELIABILITY METALLIC COMPONENTS
20: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
21: (2012)
Physical Characterization of Laser Interaction and Shock Generation in Laser Shock Processing: Coupled Theoretical-Experimental Analysis
22: (2013)
Laser processes for contact optimization in c-Si solar cells
23: (2013)
Laser processes for contact optimization in c-Si solar cells
24: (2013)
Laser Shock Micro-Forming as an Emerging Technique for Microsystems Shaping and Adjustment
25: (2013)
New laser-based approaches to improve the passivation and rear contact quality in high effiency crystalline silicon solar cells
26: (2014)
Study of a-Si crystallization dependence on power and irradiation time using a CW green laser
27: (2016)
Laser based Processes for Product Customization in Building Integrated Photovoltaics
28: (2017)
Laser Induced Forward Transfer of High Viscosity Fluids. Application To Solar Cell Metallization and Bio-Printing.
2 Cursos, seminarios y tutoriales
1: (2010)
Theoretical Analysis and Experimental Implementation of Laser Shock Processing of Metallic Alloys for Enhanced Mechanical Behaviour
2: (2014)
Laser based metallization processes for PV devices
2 Otras Publicaciones
1: (2011)
Laser Shock Processing: A Technique for the Improvement of Mechanical and Surface Propierties of High Reliability Metallic Alloys
2: (2011)
Simulation of Laser Annealing of Amorphous Silicon
99 Ponencia en Congresos
1: (2007)
Laser Selective Ablation of thin film structures based on a-Si:H.
2: (2007)
Laser shock processing to improve residual stresses with and without paint layer on 6061-T6 aluminium alloy.
3: (2007)
Model Based Optimization criteria for the generation of deep compressive residual stresses in high elastic limit alloys by laser shock processing.
4: (2007)
Model Based Plasma Monitoring Methods for the Predictive Assessment of LSP applications.
5: (2007)
Optical Sensing based on simultaneous ellipsometry, reflectivity and spectrometry profiles in sub-micron holes structures for bio-applications.
6: (2007)
Photonic sensors based on integrated reflectivity, ellipsometry and spectrometry measurements in submicron size geometries.
7: (2007)
Short pulse laser microforming of thin metal sheets for MEMS manufacturing.
8: (2007)
Simultaneous reflectivity, ellipsometry and spectrometry measurements in submicron structures for biosensing applications.
9: (2007)
Thin metal sheet bending and residual stresses relaxation by ns pulsed lasers in MEMS manufacturing.
10: (2007)
UV laser microprocessing of photovoltaic devices based on thin film a-Si:H.
11: (2008)
Análisis de la Influencia de los Parámetros Operacionales en Recubrimientos Superficiales Asistidos por Láser de Acero AISI 431 sobre Acero al Carbono
12: (2008)
Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser
13: (2008)
DESARROLLO Y CARACTERIZACIÓN DE PROCESOS DE MICROCONFORMADO DE MATERIALES METÁLICOS MEDIANTE PULSOS LÁSER EN EL DOMINIO DE NANOSEGUNDOS
14: (2008)
Development of 2D/3D Microstructuring Techniques using ns Pulsed UV Lasers
15: (2008)
DIRECT DEVELOPMENT OF 2D/3D MICROSTRUCTURES WITH UV LASERS IN THE NS REGIME
16: (2008)
Diseño de un Sistema de Monitorización y Control de Procesos de Tratamiento Térmico Superficial de Materiales con Láser Mediante Realimentación de Estados
17: (2008)
Diseño y desarrollo de un laboratorio virtual de aplicaciones industriales con láser
18: (2008)
EFFECT OF LASER SHOCK PROCESSING ON FATIGUE CRACK GROWTH AND FRACTURE TOUGHNESS OF ALUMINUM AND STEEL
19: (2008)
Laser shock microforming of thin metal sheets
20: (2008)
Metrología óptica dimensional para la determinación de espesores en estructuras submicrométricas
21: (2008)
Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns
22: (2008)
MODELLING OF LASER ABLATION PROCESSES FOR APPLICATIONS IN THIN FILM PHOTOVOLTAIC TECHNOLOGY
23: (2008)
Modelling of Laser Ablation Processes for Applications in Thin Film Photovoltaic Technology
24: (2008)
Modification of Thin Surface Layer of AlMgSiPb and AlSi1MgMn Alloys with Laser Shock Processing Method with Q-switched Nd:YAG Laser
25: (2008)
Nanosecond Laser Shock Microforming of Thin Metal Components
26: (2008)
Numerical Modelling of Stress Fields and Residual Constraints in Metallic Targets Subject to Laser Shock Processing
27: (2008)
Numerical simulation of plasma dynamics in laser shock processing experiments
28: (2008)
Numerical Simulation of Plasma Dynamics in Laser Shock Processing Experiments
29: (2008)
Optimización de Procesos de Inducción de Tensiones Residuales en Compresión en Materiales Metálicos por Ondas de Choque Generadas por Láser
30: (2008)
Optimization of interferometric photonic cells for biochemical sensing based on advanced high sensitivity optical techniques
31: (2008)
Optimization of Sub-micro-holes 2D periodic interferometric structures for biochemical sensing based on advance high sensitivity optical techniques
32: (2008)
Recent Results on Short Pulse Laser Microforming of Thin Metal Sheets
33: (2008)
Residual Stress Fields and Associated Modification of Surface Properties in Al and Ti Alloys Induced by Q-switched, ns Pulse, Laser Shock Processing
34: (2008)
SELECTIVE ABLATION OF PHOTOVOLTAIC MATERIALS WITH UV LASER SOURCES FOR MONOLITHIC INTERCONNECTION OF DEVICES BASED ON a-Si:H
35: (2008)
Sub-micro holes sensing cells analyzed by Fourier Transform visible spectrometry for biochemical sensing
36: (2008)
Theoretical Description and Experimental Diagnosis of the Laser-Plasma Interaction in LSP applications. An Evaluation of the Effect of Interaction Parameters
37: (2008)
TRATAMIENTO DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER
38: (2008)
TRATAMIENTO SUPERFICIAL DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER COMO MÉTODO DE MEJORA DE SUS PROPIEDADES MÉCANICAS
39: (2008)
UV LASER SELECTIVE ABLATION OF PHOTOVOLTAIC MATERIALS FOR MONOLITHIC INTERCONNECTION OF DEVICES BASED ON a-Si:H
40: (2008)
UV laser-induced high resolution cleaving of Si wafers for micro-nano devices characterization
41: (2008)
Vertical resonant microcativites based on pillars analyzed by beam profile ellipsometry and reflectometry
42: (2008)
3D Laser micromachining applications development on a dual ns based processing system
43: (2009)
Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-T351
44: (2009)
Design issues of engineered residual stress fields and associate surface properties modification by lsp in al and ti alloys
45: (2009)
Detection limit comparison of F-P based resonant cavities
46: (2009)
Laser shock processing of metallic materials. Prospects for application to release the residual stresses in FSW joints
47: (2009)
Model based analysis of the effect of irradiation parameters on the plasma driven thermal fluxes in laser shock processing
48: (2009)
Optical characterization of the heat-affected zone in laser patterning of thin film a-Si:H
49: (2009)
Optical characterization of the heat-affected zone in laser scribing of thin film photovoltaic modules based on a-Si:H
50: (2009)
Residual stress fields and associate surface properties modification induced by laser shock processing in some characteristic al alloys
51: (2009)
Short pulse laser shock microforming of thin metal MEMS components
52: (2010)
Coupled Theoretical-Experimental Analysis of Laser Interaction and Shock Generation in Laser Shock Processing
53: (2010)
EFFECT OF PLASMA CONFINEMENT ON LASER SHOCK PROCCESSING OF THIN METAL SHEETS
54: (2010)
Laser shock processing technology (LSP): Basic principles and technological issues
55: (2010)
Laser shock processing to improve the reliability of welded metal structures
56: (2010)
Mechanical Characteristics Improvement by LSP on FSW joints
57: (2010)
Procesos láser en dispositivos fotovoltaicos de silicio en lámina delgada
58: (2010)
Simulación termo-mecánica de procesos de tratamiento superficial mediante ondas de choque generadas por láser
59: (2010)
Thermomechanical Modelling of Stress Fields in Metallic Targets Subject to Laser Shock Processing
60: (2011)
Coupled RS's Fields and Deformation Control in the Laser Shock Processing of Thin Sheets for Fatigue Life Improvement
61: (2011)
Coupled Theoretical-Experimental Characterization of Plasma Dynamics and Thermo-Mechanical Wave Generation in Laser Shock Processing
62: (2011)
Improvement of mechanical properties and life extension of high reliability structural components by laser shock processing
63: (2011)
Laser Shock Microforming of Thin Metal Sheets with ns Lasers
64: (2011)
The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens
65: (2011)
The Role of Short Pulse High Intensity Lasers in Material Surface Properties Modification and MEMS Manufacturing
66: (2012)
Analysis of wavelength influence on a-Si crystallization processes with nanosecond laser sources
67: (2012)
Estimation of Local Crystallization of a-Si:H Thin Films by Nanosecond Pulsed Laser Irradiation Through Local Temperature Simulation
68: (2012)
Influence of Laser Wavelength on Laser-Fired Contacts for Crystalline Silicon Solar Cells
69: (2012)
Parameterization of dry laser doping in c-Si with ns DPSS laser sources
70: (2013)
Optimization of laser micro-doping processes for silicon photovoltaic applications
71: (2013)
Experimental and numerical study of CW green laser crytallization of a-Si thin films
72: (2013)
Laser Shock Microforming of Thin Metal Sheets with Q-switched ns-Pulsed Lasers
73: (2013)
Simulación Termo-Mecánica de Procesos de Conformado Directo por Láser
74: (2013)
UV picosecond laser selective ablation of aluminum films for photovoltaic devices
75: (2014)
LASER INDUCED FORWARD TRANSFER OF SILVER PASTES FOR PRINTING OF FINGERS IN C-SI CELLS.
76: (2014)
Silicon PV module customization using laser technology for new BIPV applications
77: (2015)
Analysis of light scattering by laser-textured AZO films for PV thin-film solar cells
78: (2015)
High volume transfer of high viscosity silver pastes using Laser Direct- Write Processing for metallization of c-Si cells
79: (2015)
Laser curing of silver pastes for photovoltaic applications.
80: (2015)
Laser printing and curing/sintering of silver paste lines for solar cell metallization
81: (2015)
METALLIZATION OF SILICON SOLAR CELLS USING PS- AND NS-PULSED LASERS
82: (2016)
LASER CRYSTALLISATION OF a-Si THIN FILMS DEPOSITED BY RADIO-FREQUENCY MAGNETRON SPUTTERING TO BE USED AS ABSORBER LAYER IN SILICON PHOTOVOLTAIC TECHNOLOGY
83: (2016)
Characterization of transfer regimes of high-viscosity silver pastes printed by LIFT
84: (2016)
Characterization of transfer regimes of high-viscosity silver pastes printed by LIFT
85: (2016)
Laser based Processes for Product Customization in Building Integrated Photovoltaics
86: (2016)
Laser Induced Forward Transfer for Tissue Engineering at Laser Centre UPM: Filling the Gap between Lab Applications and Industrial Requirements
87: (2016)
Laser induced forward transfer of high viscosity silver paste for new metallization methods in photovoltaic and flexible electronics industry
88: (2016)
LIFT of high viscosity silver paste for new metallization methods in photovoltaic and flexible electronics industry
89: (2016)
Thermal modelling of laser silicon crystallization
90: (2017)
Laser functionalization of surfaces
91: (2017)
A COMPREHENSIVE MODEL FOR THE COUPLED PREDICTIVE ASSESSMENT OF RESIDUAL STRESSES AND DEFORMATIONS IN LASER SHOCK PROCESSING OF METALLIC MATERIALS
92: (2017)
COMSOL Simulation of Blister Actuated Laser Induced Forward Transfer (BA-LIFT).
93: (2017)
Finite element method modeling applied to laser crystallization of amorphous silicon.
94: (2017)
Free form metallization of solar cells using Laser Induced Forward Transfer.
95: (2017)
Laser crystallization of silicon and study by finite element modelling.
96: (2017)
Laser Direct Writing Techniques for Metallization of Solar Cells
97: (2017)
LASER PROCESSING OF THIN-FILM a-Si AS AND ABSORBER MATERIAL FOR ALTERNATIVE LOW-COST SILICON PHOTOVOLTAIC TECHNOLOGY
98: (2017)
Laser-induced crystallization of sputtered unhydrogenated silicon at low temperatures
99: (2017)
Numerical study on the effects of dimensionless parameters on Laser Induced Forward Transfer printability range
Explotación de Resultados y Transferencia de Tecnología
1 Creación de empresas
1: (2015)
Innofluence
21 Patentes
1: (2008)
Sistemas de detección óptica para bio-ensayos de alta sensibilidad sin marcado.
2: (2009)
Procedimiento de marcaje, encriptación, etiquetado y codificación óptica
3: (2009)
Sistema de detección óptica para bio-ensayos de alta sensibilidad sin marcado
4: (2010)
Optical detection system for labeling-free high-sensitivity biological assay, has biosensitive cells and fluid connections rested on substrate, and optical head arranged to perform analysis with respect to cells and analytes in head.
5: (2010)
Optical detection system for labeling-free high-sensitivity biological assay, has biosensitive cells and fluid connections rested on substrate, and optical head arranged to perform analysis with respect to cells and analytes in head.
6: (2010)
Sistemas de detección óptica para bio-ensayos de alta sensibilidad sin marcado.
7: (2011)
Procedimiento de marcaje, encriptación, etiquetado y codificación óptica
8: (2011)
Sistema de detección óptica para bio-ensayos de alta sensibilidad sin marcado
9: (2012)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN ETIQUETADO Y CODIFICACIÓN ÓPTICA
10: (2012)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN ETIQUETADO Y CODIFICACIÓN ÓPTICA
11: (2012)
SISTEMAS DE DETECCION OPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
12: (2012)
SISTEMAS DE DETECCION OPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
13: (2013)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN ETIQUETADO Y CODIFICACIÓN ÓPTICA
14: (2013)
SISTEMAS DE DETECCION OPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
15: (2016)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
16: (2016)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
17: (2016)
SISTEMA DE DETECCIÓN ÓPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
18: (2017)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
19: (2017)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
20: (2017)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
21: (2017)
SISTEMA DE DETECCIÓN ÓPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2019 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
