Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
RESEARCHERS
RDI STRUCTURES
RESEARCH ACTIVITIES
INNOVATION
Investigador
Jose Manuel Perlado Martin
Researcher Category
L.D. PROF. EMERITO
UPM Centre
E.T.S. DE INGENIEROS INDUSTRIALES
Department:
INGENIERÍA ENERGÉTICA (N)
Research Centre/Institute
INSTITUTO DE FUSION NUCLEAR
Knowledge Area
INGENIERIA NUCLEAR
Research Group:
Fusión Nuclear Inercial y Tecnología de fusión
Email
josemanuel.perlado
upm.es
Research Reports
Proyectos de I+D+i y generación de recursos
115 Proyectos de I+D+i
1: (2007)
Acuerdo de Colaboración entre el CIEMAT y el Instituto de Fusión Nuclear de la UPM para el desarrollo de las tareas de preparación del Proyecto de Instalación Singular denominado TECNOFUSION.
2: (2007)
Convenio CIEMAT-DENIM en el marco del Programa de Actividades de Seguimiento (keep-in-touch) de la Fusión por Confinamiento Inercial (IFE) para la producción de energía de la Unión Europea.
3: (2007)
Convenio de cooperación entre el CIEMAT y la F2I2 en las actividades derivadas del Acuerdo del enfoque ampliado para la Fusión Nuclear
4: (2007)
Cooperación en el campo de la fusión nuclear por confinamiento inercial y tecnologia de la fusión
5: (2007)
Fase preparatoria del Proyecto HiPER
6: (2007)
Fase preparatoria del Proyecto HiPER
7: (2007)
Fusión por impacto y materiales y sistemas bajo irradiación en experimentos y demostradores de fusión nuclear II
8: (2007)
MODELIZACIÓN ESTUDIO EFECTOS RADIACIÓN MATERIALES
9: (2007)
Teoría y Modelización Computacional de Mecanismos de Daño por Irradiación en Fusión Nuclear y en Materiales Ópticos, Aislantes y Metales. Irradiación y Diagnosis de Metales Puros.
10: (2008)
Convenio CIEMAT/UPM para Cooperación en el campo de la Fusión Nuclear por Confinamiento Inercial y Tecnología de la Fusión. (ref.: 06/156)
11: (2008)
Fase preparatoria del Proyecto HiPER.
12: (2008)
Fusión por Impacto y Materiales y Sistemas bajo Irradiación en Experimentos y Demostradores de Fusión Nuclear (III)
13: (2008)
GETMAT: Gen IV and Transmutation MATerials. Fp7-Fission-2007. (Collaborative Project).
14: (2008)
HiPER: European High Power Laser Energy Research Facility (Preparatory Phase Study). Fp7-infraestructures-2007-1. VII Framework Programme, capacities workprogramme. Grant Agreement No. 211737.
15: (2008)
Simulación y diagnosis de daño por radiación en metales, óptica, aislantes y materiales porosos y ultraresistentes (Subproyecto).
16: (2008)
Teoría y Modelización Computacional de Mecanismos de Daño por Irradiación en Fusión Nuclear y en Materiales Ópticos, Aislantes y Metales. Irradiación y Diagnosis de Metales Puros.
17: (2009)
Contrato de colaboración para cálculos neutrónicos en la fuente de neutrones por espalación
18: (2009)
Convenio CIEMAT/DENIM en el marco del Programa de Actividades de Seguimiento (keep-in-touch) de la Fusión Nuclear por Confinamiento Inercial (IFE) para la producción de energía de la Unión Europea. (ref.: 08/061)
19: (2009)
Convenio CIEMAT-F2I2 para Cooperación en las Actividades derivadas del Acuerdo del enfoque ampliado para la fusión nuclear.
20: (2009)
Convenio CIEMAT/UPM para Cooperación en el campo de la Fusión Nuclear por Confinamiento Inercial y Tecnología de la Fusión . (ref.: 06/156)
21: (2009)
Convenio específico para la ejecución de la actividad investigadora del Programa CONSOLIDER-INGENIO 2010 CSD2008/079 Programa de Tecnología de Fusión: TECNO-FUS entre el Instituto de Fusión Nuclear (UPM) y CIEMAT referente al Convenio de ejecución CONSOLIDER para el Desarrollo del Programa de Actividad investigadora del Equipo Beneficiario: Programa de Tecnología de Fusión: TECNO-FUS.
22: (2009)
Estudio de viabilidad para el centro nacional de tecnologías para la fusión, ICTS TECHNOFUSION. Contrato para regular la colaboración en proyecto de investigación científica, desarrollo e innovación tecnológica.
23: (2009)
GETMAT: Gen IV and Transmutation MATerials. Fp7-Fission-2007. (Collaborative Project). VII Framework Programme.
24: (2009)
HiPER: European High Power Laser Energy Research Facility (Preparatory Phase Study). Fp7-infraestructures-2007-1. VII Framework Programme, capacities workprogramme. Grant Agreement No. 211737.
25: (2009)
Inertial Fusion Energy Research in Target Design, Safety and Environment and Materials for Targets and Blankets in Future Experimental Facilities and Reactors¿. Research Agreement between IAEA and Instituto de Fusión Nuclear de la UPM. IAEA Research Agreement No. 13756
26: (2009)
Multiscale Modeling in Ferritic and Ceramics Materials and Connection with Accelerator Experiments. Research Agreement between IAEA and Instituto de Fusión Nuclear de la UPM. IAEA Research Agreement No. 14930/R0
27: (2009)
Simulación y diagnosis de daño por radiación en metales, óptica, aislantes y materiales porosos y ultraresistentes (Subproyecto).
28: (2009)
Studies of Materials in Advanced Energy Research. Memorandum of Agreement on Scientific Cooperation between Lawrence Livermore National Laboratory, LLNL and the Universidad Politécnica de Madrid, UPM (Instituto de Fusión Nuclear)
29: (2010)
ACTIVIDADES DE SEGUIMIENTO KEEP-IN TOUCH DE LA FUSION NUCLEAR POR CONFINAMIENTO INERCIAL IFE PARA LA PRODUCCIÓN DE NERGI ADE LA UE
30: (2010)
Broader Approach (BA) Ministerio de Educación y Ciencia. Convenio de Cooperación entre el CIEMAT y la F2I2. Cooperación en las actividades derivadas del Acuerdo del Enfoque Ampliado para la Fusión Nuclear
31: (2010)
Convenio específico entre el Consorcio EES-Bilbao y la Fundación para el fomento de la Innovación Industrial para la Realización de Asesoramiento en Cálculos Neutrónicos.
32: (2010)
Convenio específico para la ejecución de la actividad investigadora del Programa CONSOLIDER-INGENIO 2010 CSD2008/079 Programa de Tecnología de Fusión: TECNO-FUS entre el Instituto de Fusión Nuclear (UPM) y CIEMAT referente al Convenio de ejecución CONSOLIDER para el Desarrollo del Programa de Actividad investigadora del Equipo Beneficiario: ¿Programa de Tecnología de Fusión: TECNO-FUS¿.
33: (2010)
DESARROLLO DEL PROGRAMA TECHNOFUSION DE ACTIV I+D MULTIDISCIPLINARES DE LA INSTALACION CIENTIFICOTECNICA SINGULAR DEL CENTRO DE TECNOLOGIAS PARA LA FUSION: CIEMA
34: (2010)
DISEÑO DE CAMARA DE REACCION Y MATERIALES AVANZADOS PARA ESFRI HIPER
35: (2010)
Experimental validation of the modelling of damage accumulation in Fe-Cr alloys.Convenio de colaboración entre el CIEMAT/DENIM en el marco del Programa Tecnológico de EFDA 2008/2009. WP08-09-MAT-REMEV (Ref. 10/306).
36: (2010)
Fusion Energy Research in Target Desing Safety and Environment and Materials for Targets and Blankets
37: (2010)
Fusión por Impacto y Materiales y Sistemas bajo Irradiación en Experimentos y Demostradores de Fusión Nuclear (V).
38: (2010)
GRANT AGREEMENT N. 212175
39: (2010)
HiPER: European High Power Laser Energy Research Facility (Preparatory Phase Study). Fp7-infraestructures-2007-1. VII Framework Programme, capacities workprogramme. Grant Agreement No. 211737.
40: (2010)
MATERIALES AVANZADOS COMPUESTOS DE CERAMICA. MODELIZACION PARA ESTUDIO DE LOS EFECTOS DE LA RADICACION EN MATERIALES.
41: (2010)
SIMULACION Y DIAGNOSIS DE DAÑO POR RADIACION EN METALES, OPTICA, AISLANTES Y MATERIALES POROSOS Y ULTRARESISTENTES
42: (2010)
TRES BECAS DOCTORALES (CIEMAT-FUSION). OBTENCION DE ENERGIA MEDIANTE LA FUSION NUCLEAR POR COFINAMIENTO INERCIAL
43: (2011)
ACTIVIDADES DE SEGUIMIENTO KEEP-IN TOUCH DE LA FUSION NUCLEAR POR CONFINAMIENTO INERCIAL IFE PARA LA PRODUCCIÓN DE NERGI ADE LA UE
44: (2011)
Broader Approach (BA) Ministerio de Educación y Ciencia.
45: (2011)
Convenio específico entre el Consorcio EES-Bilbao y la Fundación para el Fomento de la Innovación Industrial para el Asesoramiento de Activación y Decaimiento.
46: (2011)
DESARROLLO DEL PROGRAMA TECHNOFUSION DE ACTIV I+D MULTIDISCIPLINARES DE LA INSTALACION CIENTIFICOTECNICA SINGULAR DEL CENTRO DE TECNOLOGIAS PARA LA FUSION: CIEMA
47: (2011)
DISEÑO DE CAMARA DE REACCION Y MATERIALES AVANZADOS PARA ESFRI HIPER
48: (2011)
ENEN-III: European Nuclear Education Network Training Schemes
49: (2011)
EXPERIMENTAL VALIDATION OF THE MODELLING OF DAMAGE ACCUMULATION IN FE-CR ALLOYS". CONVENIO DE COLABORACIÓN ENTRE EL CIEMAT/DENIM EN EL MARCO DEL PROGRAMA TECNOLÓ
50: (2011)
Fusión por Impacto y Materiales y Sistemas bajo Irradiación en Experimentos y Demostradores de Fusión Nuclear (VI)
51: (2011)
GETMAT: GEn IV and Transmutation MATerials
52: (2011)
HIPER (1): European High Power Laser Energy Research Facility
53: (2011)
HIPER (1): European High Power Laser Energy Research Facility
54: (2011)
Ion Radiation Damage in Fusion Reactor Materials (RADIAFUS III)
55: (2011)
Memorandum of Understanding on Academic Exchange between Institute of Laser Engineering, Osaka University and Institute of Nuclear Fusion, University of Polytechnic Madrid.
56: (2011)
N/A 27: Radiation Effects Modelling and Experimental Validation - 2011
57: (2011)
PROGRAMA CONSOLIDR INGENIO 2010-PROGRAM DE TECNOLOGIA DE FUSION TECNO-FUS
58: (2011)
SIMULACION Y DIAGNOSIS DE DAÑO POR RADIACION EN METALES, OPTICA, AISLANTES Y MATERIALES POROSOS Y ULTRARESISTENTES
59: (2011)
TRES BECAS DOCTORALES (CIEMAT-FUSION). OBTENCION DE ENERGIA MEDIANTE LA FUSION NUCLEAR POR COFINAMIENTO INERCIAL
60: (2012)
ACTIVIDAD WP10-MAT-REMEV-06 PLASTICITY AND FRACTURE
61: (2012)
ACTIVIDADES DE SEGUIMIENTO KEEP-IN TOUCH DE LA FUSION NUCLEAR POR CONFINAMIENTO INERCIAL IFE PARA LA PRODUCCIÓN DE NERGI ADE LA UE
62: (2012)
CARACTERIZACIÓN Y DESARROLLO DE MATERIALES AVANZADOS PARA EL DESARROLLO DE NUEVAS BATERÍA SE LITIO
63: (2012)
DESARROLLO DEL PROGRAMA TECHNOFUSION DE ACTIV I+D MULTIDISCIPLINARES DE LA INSTALACION CIENTIFICOTECNICA SINGULAR DEL CENTRO DE TECNOLOGIAS PARA LA FUSION: CIEMA
64: (2012)
MATERIALES PARA HIPER-ESFRI PLANTA DE POTENCIA FUSIÓN POR LÁSER
65: (2012)
Materiales para HiPER-ESFRI planta de potencia fusión por láser
66: (2012)
N/A 39: MAT-IREMEV: Integrated Radiation Effects Modelling and Experimental Validation
67: (2012)
PLASMA PHYSICS AND APPLICATIONS (PLAPA)
68: (2013)
ACTIVIDADES DE SEGUIMIENTO KEEP-IN TOUCH DE LA FUSION NUCLEAR POR CONFINAMIENTO INERCIAL IFE PARA LA PRODUCCIÓN DE NERGI ADE LA UE
69: (2013)
ANÁLISIS DE LA ACTIVACIÓN Y RADIACIÓN GENERADA POR ACTIVACIÓN EN EL BEAM-DUMP DE ESS-BILBAO
70: (2013)
ANALISIS DE SITUACIONES ACCIDENTALES DEL BLANCO DE PRODUCCIÓN DE NEUTRONES DE NEUTRONES ESS-BILBAO
71: (2013)
CARACTERIZACIÓN Y DESARROLLO DE MATERIALES AVANZADOS PARA EL DESARROLLO DE NUEVAS BATERÍA SE LITIO
72: (2013)
COST Action MP1208: Developing the Physics and the Scientific community for Inertial Confinement Fusion at the time of NIF ignition
73: (2013)
DESARROLLO DEL PROGRAMA TECHNOFUSION DE ACTIV I+D MULTIDISCIPLINARES DE LA INSTALACION CIENTIFICOTECNICA SINGULAR DEL CENTRO DE TECNOLOGIAS PARA LA FUSION: CIEMA
74: (2013)
Diseño termomecánico del reflector de la Target Station de ESS-Bilbao
75: (2013)
EFFECT OF CR CONCENTRATION ON FECR ALLOYS DEFECTS
76: (2013)
EVALUACION DE UNA FUENTE DE NEUTRONES BASADA EN UN SISTEMA SUBCRÍTICO.
77: (2013)
IRRADIACIÓN, CARACTERIZACIÓN Y MODELADO DE NUEVOS MATERIALES PARA FUSIÓN INERCIAL Y MAGNÉTICA
78: (2013)
MATERIALES PARA HIPER-ESFRI PLANTA DE POTENCIA FUSIÓN POR LÁSER
79: (2014)
ACTIVIDADES DE SEGUIMIENTO KEEP-IN TOUCH DE LA FUSION NUCLEAR POR CONFINAMIENTO INERCIAL IFE PARA LA PRODUCCIÓN DE NERGI ADE LA UE
80: (2014)
ANALISIS DE SITUACIONES ACCIDENTALES DEL CRIOSTATO DEL PROYECTO ITER.
81: (2014)
ANALISIS DE SITUACIONES ACCIDENTALES DEL CRIOSTATO DEL PROYECTO ITER.
82: (2014)
ANALISIS DE SITUACIONES ACCIDENTALES DEL CRIOSTATO DEL PROYECTO ITER.
83: (2014)
CARACTERIZACIÓN Y DESARROLLO DE MATERIALES AVANZADOS PARA EL DESARROLLO DE NUEVAS BATERÍA SE LITIO
84: (2014)
Convenio específico entre el Consorcio ESS-Bilbao y la Fundación para el Fomento de la Innovación Industrial para el Asesoramiento de Activación y Decaimiento
85: (2014)
DESARROLLO DEL PROGRAMA TECHNOFUSION DE ACTIV I+D MULTIDISCIPLINARES DE LA INSTALACION CIENTIFICOTECNICA SINGULAR DEL CENTRO DE TECNOLOGIAS PARA LA FUSION: CIEMA
86: (2014)
ENTENDIENDO EL COMPORTAMIENTO A ESCALA MESOSCOPICA DE LAS BATERIAS SOLIDAS DE LITIO
87: (2014)
EUROfusion - IFN: Implementation of activities described in the Roadmap to Fusion during Horizon 2020 through a Joint Programme of the members of the EUROfusion consortium
88: (2014)
EXPERIMENTAL VALIDATION OF THE MODELLING OF DAMAGE ACCUMULATION IN FE-CR ALLOYS. CONVENIO DE COLABORACIÓN ENTRE EL CIEMAT/DENIM EN EL MARCO DEL PROGRAMA TECNOLÓ
89: (2014)
IRRADIACIÓN, CARACTERIZACIÓN Y MODELADO DE NUEVOS MATERIALES PARA FUSIÓN INERCIAL Y MAGNÉTICA
90: (2014)
MATERIALES PARA HIPER-ESFRI PLANTA DE POTENCIA FUSIÓN POR LÁSER
91: (2014)
PROGRAMAS DE INVESTIGACION COOPERATIVA PARA EL DESARROLLO DE AREAS DE ESPECILIZACIÓN
92: (2014)
SIMULACION Y DIAGNOSIS DE DAÑO POR RADIACION EN METALES, OPTICA, AISLANTES Y MATERIALES POROSOS Y ULTRARESISTENTES
93: (2015)
: Sistema de espectrocopía por desorción térmica programda hasta alta temperatura (3000 k) para estudio de gases en materiales
94: (2015)
ANÁLISIS DE VIABILIDAD DE CATALIZADORES BASADOS EN NANOPARTÍCULAS PLASMÓNICAS PARA APLICACIONES ENERGÉTICAS
95: (2015)
ANALISIS MECANICO DE LA" MONOLITH VESSEL" DE ESS
96: (2015)
CONVENIO ESPECIFICO PARA LA EVALUACIÓN DE GEOMETRÍAS ALTERNATIVAS PARA BLANCOS DE WOLFRAMIO REFRIGERADOS CON HELIO.
97: (2015)
DESARROLLO DEL PROGRAMA DE ACTIVIDADES DE I+D MULTIDISCIPLINARES DEL CENTRO DE TECNOLOGÍAS PARA LA FUSIÓN (TECHNOFUSION) TECHNOFUSION (II)-CM
98: (2015)
EFFECT OF CR CONCENTRATION ON FECR ALLOYS DEFECTS
99: (2015)
GRANT AGREEMENT N. 212175
100: (2015)
MATFUSLA: Materiales para HIPER-ESFRI planta de potencia fusión por láser
101: (2015)
MATLIBA: Caracterización y desarrollo de materiales avanzados para el desarrollo de nuevas baterias de litio
102: (2015)
PEDIDO PC-13419/15 CALCULO DE NEUTRONICA Y ACTIVACIÓN PARA LOS PUERTOS DIAGNOSTICOS DE ITER
103: (2015)
PEDIDO PC-13419/15 CALCULO DE NEUTRONICA Y ACTIVACIÓN PARA LOS PUERTOS DIAGNOSTICOS DE ITER
104: (2015)
RADIAFUS-III_MM: Irradiación, Caracterización y Modelado de nuevos Materiales para Fusión Inercial y Magnética
105: (2015)
UMBLA: Entendiendo el comportamiento a escala mesoscópica de las baterías sólidas de litio
106: (2016)
ENTENDIENDO EL COMPORTAMIENTO A ESCALA MESOSCOPICA DE LAS BATERIAS SOLIDAS DE LITIO
107: (2016)
EVALUACIÓN DE PUENTE DE NEUTRONES COMPACTA PARA IMAGEN DE ALTA RESOLUCIÓN
108: (2016)
FUSION. Desarrollo del Programa de actividades de I+D multidisciplinares del Centro de Tecnologías de Tecnologías para la Fusión (TechnoFusión)
109: (2016)
PEDIDO PC-13419/15 CALCULO DE NEUTRONICA Y ACTIVACIÓN PARA LOS PUERTOS DIAGNOSTICOS DE ITER
110: (2016)
SUBCONTRACT AGREEMENT IN THE PROVISION OF SERVICES RELATED TO THE NEUTRONICS DUDIES FOR THE INTEGRATION DESIGN OF FIAGNOSTICS INTO THE ITER PORTS SC02
111: (2016)
TRABAJOS TÉCNICOS DE MODELO NEUTRÓNICO DEL MODERADOR PROPUESTO POR JÚLICH ACOPLADO EN UNA FUENTE COMPACTO DE PROTONES DE 50 MEV.
112: (2017)
FUSION. Desarrollo del Programa de actividades de I+D multidisciplinares del Centro de Tecnologías de Tecnologías para la Fusión (TechnoFusión)
113: (2017)
HIPER
114: (2017)
SUBCONTRACT AGREEMENT IN THE PROVISION OF SERVICES RELATED TO THE NEUTRONICS SUDIES FOR THE INTEGRATION DESIGN OF FIAGNOSTICS INTO THE ITER PORTS SC02
115: (2018)
FUSION. Desarrollo del Programa de actividades de I+D multidisciplinares del Centro de Tecnologías de Tecnologías para la Fusión (TechnoFusión)
Formación de Investigadores y Movilidad
12 Tesis Doctorales
1: (2007)
MODELIZACIÓN MICROSCÓPICA DEL DAÑO POR IRRADIACIÓN EN METALES HCP (a-ZIRCONIO): EFECTO DE LA ANISOTROPÍA EN LA DIFUSIÓN Y EVOLUCIÓN DE DEFECTOS
2: (2007)
Modelización microscópica del daño por irradiación en metales hcp (α-Zirconio): efecto de anisotriopía en la difusión y evolución de defectos
3: (2008)
Desarrollo de Criterios Nucleares de Diseño de Fuentes de Neutrones de Espalación.
4: (2008)
Development of advanced numerical algorithms for kinetic and dynamic simulations of irradiated systems: kinetic Monte Carlo and dislocation dynamics (Desarrollo de algoritmos numéricos avanzados para la simulación de la cinética y dinámica de sistemas irradiados: cinética de Monte Carlo y dinámica de dislocaciones
5: (2008)
Estudio mediante dinámica molecular de la generación y movilidad de defectos en sílice amorga bajo irradiación: mecanismos a alta energía en presencia de hidrógeno.
6: (2009)
Detección, caracterización y modelización de los defectos de las varillas de combustible y su efecto en el comportamiento de los radionucleidos en el circuito primario de los reactores PWR.
7: (2013)
Neutronic design and radiological aspects of the HiPER facilities
8: (2013)
Simulación atomística de metales líquidos y aleaciones para reactores de fusión nuclear
9: (2015)
Modelización y validación experimental del transporte de tritio en metal líquido y otros materiales para reactores de fusión nuclear magnético e inercial
10: (2015)
Multiscale modeling of the plastic behaviour in single crystal tungsten: from atomistic to crystal plasticity simulations
11: (2016)
Design of a new neutron delivery system for high flux sources. AUTOR DE LA TESIS: ROMAIN BOFFY
12: (2016)
Diseño de un módulo de IFMIF para irradiación de envolturas regeneradoras basadas en metales líquidos para reactores de fusión. AUTORA DE LA TESIS : NATALIA CASAL IGLESIAS
Difusión de Resultados de Investigación
148 Artículos en revistas
1: (2007)
Advances in Materials Physics at DENIM
2: (2007)
Algunos casos del papel que la simulación computacional multiescala desarrolla para comprender la irradiación de materiales en la fusión nuclear
3: (2007)
He and H production and induced Swelling in KOYO-F (aceptado para su publicación)
4: (2007)
Identification and characterization of defects produced in irradiated fused silica through molecular dynamics
5: (2007)
Influence of self-interstitial mobility on damage accumulation in zirconium under fission irradiation conditions.
6: (2007)
Temperature dependence of damage accumulation in alfa-zirconium
7: (2007)
The role of the fused silica stoichiometry on the intrinsic defects concentration
8: (2008)
A dislocation dynamics study of the strength of stacking fault tetrahedra. Part I: interactions with screw dislocations
9: (2008)
A dislocation dynamics study of the strength of stacking fault tetrahedra. Part II: interactions with mixed and edge dislocations
10: (2008)
Atomistically informed dislocation dynamics in fcc crystals
11: (2008)
Dynamic response of accelerator driven system to accelerator beam interruptions for cirticality
12: (2008)
He production and induced swelling in KOYO-F
13: (2008)
Modeling of displacement cascades due to energetic recoils in amorphous silica using molecular dynamics simulations.
14: (2008)
Synchronous parallel kinetic Monte Carlo for continuum diffusion-reaction systems
15: (2008)
Temperature dependence of damage accumulation in hcp metals
16: (2008)
3D neutronic calculations: CAD-MCNP methodology applied to vessel activation in KOYO-F
17: (2009)
Defect energetics in FeCr from empirical interatomic potentials
18: (2009)
Influence of self-interstitial mobility of He vacancy cluster nucleation and growth in nickel
19: (2009)
Material selection for spallation neutron source windows Application to PDS-XADS and XT-ADS prototypes
20: (2009)
Molecular dynamics study of structure transformation and H effects in irradiated silica
21: (2009)
Object Kinetic Monte Carlo calculations of electron and He irradiation of nickel
22: (2009)
The EU programme for modelling radiation effects in fusion reactor materials:An overview of recent advances and future goals
23: (2010)
Chamber responses and Safety and Fusion Technology in HiPER facility
24: (2010)
Dose rates evaluation of HiPER facility
25: (2010)
Industrial applications of laser neutron source
26: (2010)
TechnoFusion, a relevant facility for fusion technologies: The remote handling area
27: (2010)
TechnoFusión, a relevant facility for fusion technologies: Theremote handling area
28: (2010)
Waste management assessment of candidate materials for HiPER reaction chamber
29: (2011)
Potential common radiation problems for components and diagnostics in future magnetic and inertial confinement fusion devices
30: (2011)
CONSEQUENCES OF DIFFERENT METEOROLOGICAL SCENARIOS IN THE ENVIRONMENTAL IMPACT ASSESMENT OF TRITIUM RELEASE
31: (2011)
Consequences of different meteorological scenarios in the environmental impact assessment of tritium in air
32: (2011)
Consequences of different meteorological scenarios in the environmental impact assessment of tritium in air
33: (2011)
Defect energetics in Fe-Cr alloys from empirical interatomic potentials
34: (2011)
Dose rates evaluation of HiPER facility
35: (2011)
Formation energy of vacancies in FeCr alloys: Dependence on Cr concentration
36: (2011)
Formation energy of vacancies in FeCr alloys: Dependence on Cr concentration
37: (2011)
IFMIF suitability for evaluation of fusion functional materials
38: (2011)
Inertial fusion experiments and theory
39: (2011)
LIBRETTO-4: Understanding and modeling tritium transport under irradiation
40: (2011)
MATERIALS RESEARCH FOR HIPER LASER FUSION FACILITIES: CHAMBER WALL, STRUCTURAL MATERIAL AND FINAL OPTICS
41: (2011)
MATERIALS RESEARCH FOR HIPER LASER FUSION FACILITIES: CHAMBER WALL, STRUCTURAL MATERIAL AND FINAL OPTICS
42: (2011)
Molecular Dynamics Simulations of Lead and Lithium in Liquid Phase
43: (2011)
NANOSCALE VIEW OF SHOCK WAVE PROPAGATION IN SINGLE CRYSTAL FE,W, AND TA FOR NUCLEAR FUSION TECHNOLOGY
44: (2011)
Object Kinetic Monte Carlo calculations of irradiated Fe¿Cr dilute alloys: The effect of the interaction radius between substitutional Cr and self-interstitial Fe
45: (2011)
Potential common radiation problems for components and diagnostics in future magnetic and inertial confinement fusion devices
46: (2011)
Simulation for evaluation of the multi-ion-irradiation Laboratory of TechnoFusion facility and its relevance for fusion applications
47: (2011)
Sostenibilidad energética a largo plazo. El papel de la fusión nuclear
48: (2011)
The materials production and processing facility at the Spanish National Centre for fusion technologies (TechnoFusion)
49: (2011)
The role of spatial and temporal radiation deposition in inertial fusion chambers: the case of HiPER
50: (2011)
The role of spatial and temporal radiation deposition in inertial fusion chambers: the case of HiPER
51: (2011)
WASTE MANAGEMENT ASSESSMENT OF CANDIDATE MATERIALS FOR HIPER REACTION CHAMBER
52: (2011)
Waste management assessment of candidate materials for hiper reaction chamber
53: (2012)
Advances in neutronics and radiological protection of HiPER 4a
54: (2012)
Advances in neutronics and radiological protection of HiPER 4a
55: (2012)
Applications of laser produced ion beams to nuclear analysis of materials
56: (2012)
Calculations for ESS-Bilbao low energy target
57: (2012)
Conceptual design of the liquid metal laboratory of the TECHNOFUSION facility
58: (2012)
Conceptual design of the liquid metal laboratory of the TECHNOFUSION facility
59: (2012)
Design activities for the Beam Dump of ESS Bilbao
60: (2012)
Design and analysis of helium Brayton power cycles for HiPER reactor
61: (2012)
Design and analysis of helium Brayton power cycles for HiPER reactor
62: (2012)
H-implanted and post implanted annealed fusion steels
63: (2012)
Ion beam analysis of as-received, H-implanted and post implanted annealed fusion steels
64: (2012)
Ion beam analysis of as-received, H-implanted and post implanted annealed fusion steels
65: (2012)
Li distribution characterization in Li-ion batteries positive electrodes containing LixNi0.8Co0.15Al0.05O2 secondary particles
66: (2012)
MOLECULAR DYNAMICS SIMULATIONS OF LEAD AND LITHIUM IN LIQUID PHASE
67: (2012)
Molecular Dynamics Simulations of Lead and Lithium in Liquid Phase
68: (2012)
Neutron applications laboratory for ESS-Bilbao
69: (2012)
Neutron performance analysis for ESS target proposal
70: (2012)
Plasma-wall interaction in laser fusion reactors: novel proposals for radiation tests of first wall materials
71: (2012)
Plasma-wall interaction in laser fusion reactors: novel proposals for radiation tests of first wall materials
72: (2012)
Plasma-wall interaction in laser inertial fusion reactors: novel proposals for radiation tests of first wall materials
73: (2012)
Plasma-wall interaction in laser inertial fusion reactors: novel proposals for radiation tests of first wall materials
74: (2012)
PROGRESS IN ADVANCED MATERIALS UNDER EXTREME CONDITIONS FOR NUCLEAR FUSION TECHNOLOGY
75: (2012)
Stability of vacancy clusters in FeCr alloys: A study of the Cr concentration dependence
76: (2012)
Stability of vacancy clusters in FeCr alloys: A study of the Cr concentration dependence
77: (2012)
Techniques to accelerate convergence of stress-controlled molecular dynamics simulations of dislocation motion
78: (2012)
Techniques to accelerate convergence of stress-controlled molecular dynamics simulations of dislocation motion
79: (2012)
Techniques to accelerate convergence of stress-controlled molecular dynamics simulations of dislocation motion
80: (2012)
Temperature-induced screw dislocation core transformation and its effect on mobility in pure W
81: (2012)
Tritium clouds environmental impact in air into the Western Mediterranean Basin evaluation
82: (2012)
VALIDATION OF REAL TIME DISPERSION OF TRITIUM OVER THE WESTERN MEDITERRANEAN BASIN IN DIFFERENT ASSESMENTS
83: (2013)
Assessment of interatomic potentials for atomistic analysis of static and dynamic properties of screw dislocations in W
84: (2013)
Assessment of interatomic potentials for atomistic analysis of static and dynamic properties of screw dislocations in W
85: (2013)
Atomistic molecular point of view for liquid lead and lithium in Nuclear Fusion technology
86: (2013)
Conceptual design of the beryllium rotating target for the ESS-Bilbao facility
87: (2013)
Conceptual design of the beryllium rotating target for the ESS-Bilbao facility
88: (2013)
Design and analysis of helium Brayton power cycles for HiPER reactor
89: (2013)
Design and analysis of helium Brayton power cycles for HiPER reactor
90: (2013)
Neutronic analysis of the bi-spectral moderator such as that proposed for ESS
91: (2013)
Neutronic analysis of the bi-spectral moderator such as that proposed for ESS
92: (2013)
Neutronic design for ESS-Bilbao neutron source
93: (2013)
Neutronic design for ESS-Bilbao neutron source
94: (2013)
Neutronics and activation of the preliminary reaction chamber of HiPER reactor based in a SCLL blanket
95: (2013)
Neutronics and activation of the preliminary reaction chamber of HiPER reactor based in a SCLL blanket
96: (2013)
Neutronics and activation of the preliminary reaction chamber of HiPER reactor based in a SCLL blanket
97: (2013)
Silica final lens performance in laser fusion facilities: HiPER and LIFE
98: (2013)
Silica final lens performance in laser fusion facilities: HiPER and LIFE
99: (2013)
Stability of vacancy clusters in FeCr alloys: A study of the Cr concentration dependence
100: (2013)
Stability of vacancy clusters in FeCr alloys: A study of the Cr concentration dependence
101: (2013)
Structural properties of hydrogen isotopes in solid phase in the context of inertial confinement fusion
102: (2013)
Studies of a self-cooled lead lithium blanket for HiPER reactor
103: (2014)
A FIRST SIMULATION STUDY OF HYDROGEN ISOTOPE ACCUMULATION AND DIFFUSION IN TUNGSTEN FIRST WALL OF HiPER INERTIAL FUSION FACILITY
104: (2014)
A neutron production target for ESS based upon the Canned-rods concept
105: (2014)
Ab initio molecular dynamics: Relationship between structural phases and the sound velocity in dense hydrogen.
106: (2014)
Basic concept for an accelerator-driven subcritical system to be used as a long-pulse neutron source for Condensed Matter research
107: (2014)
Educating Nuclear Engineers by Nuclear Science and TEchnology Master at UPM
108: (2014)
Embedded silver nanoparticle multilayers fabricated by femtosecond pulsed laser deposition
109: (2014)
Hydrogen accumulation in nanostructured as compared to the coarse-grained tungsten
110: (2014)
Interatomic potential for the compound-forming Li-Pb liquid alloy
111: (2014)
Morphological and microstructural characterization of nanostructured pure alpha-phase W coatings on a wide thickness range
112: (2014)
Optical properties of Au-Ag alloys: An ellipsometric study
113: (2014)
Simulation of Ultra-Intense Laser Irradiation Induced High Electronic Excitation of Bandgap Materials
114: (2014)
Transmission final lenses in the HiPER laser fusion power plant: system design for temperature control
115: (2014)
Viability of the ESS-Bilbao neutron source for irradiation of nuclear fusion materials
116: (2015)
A multiscale approach to defect evolution in tungsten under helium irradiation
117: (2015)
Femtosecond laser irradiation induced-high electronic excitation in band gap materials: A quantum-kinetic model based on Boltzmann equation
118: (2015)
First principles study of the behavior of hydrogen atoms in a W monovacancy.
119: (2015)
H trapping and mobility in nanostructured tungsten grain boundaries: a combined
120: (2015)
H trapping and mobility in nanostructured tungsten grain boundaries: a combined experimental and theoretical approach
121: (2015)
Linking atomistic, kinetic Monte Carlo and crystal plasticity simulations of single-crystal Tungsten strength
122: (2015)
Mechanical response to swift ion irradiation-induced nano-tracks in silica
123: (2015)
Mechanical response to swift ion irradiation-induced nano-tracks in silica
124: (2015)
Meso-scale characterization of lithium distribution in lithium-ion batteries using ion beam analysis techniques
125: (2015)
Meso-scale characterization of lithium distribution in lithium-ion batteries using ion beam analysis techniques
126: (2015)
The influence of high grain boundary density on helium retention in tungsten
127: (2015)
The influence of high grain boundary density on helium retention in tungsten
128: (2016)
A phenomological dislocation mobility law for bcc metals
129: (2016)
Ab Initio Simulation Beryllium in Solid Molecular Hydrogen: Elastic Constant
130: (2016)
Ab initio study of tungsten defects near the surface
131: (2016)
First principles study of the behavior of hydrogen atoms in a W monovacancy
132: (2016)
In situ monitoring the optical properties of dielectric materials during ion irradiation
133: (2016)
Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten
134: (2016)
Micro and nano-patterning of single-crystal diamond by swift heavy ion irradiation
135: (2016)
Modelling the thermomechanical behaviour of the tungsten first wall in HiPER laser fusion scenarios
136: (2016)
Multiscale integral analysis of a HT leakage in a fusion nuclear power plant
137: (2016)
Speed of sound in solid molecular hydrogen-deuterium: Quantum Molecular Dynamics Approximation
138: (2016)
Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations
139: (2017)
Design specification for the European Spallation Source neutron generating target element
140: (2017)
Effect of Organic Stabilizers on Silver Nanoparticles Fabricated by Femtosecond Pulsed Laser Ablation
141: (2017)
Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten
142: (2017)
On the thermal stability of the nanostructured tungsten coatings
143: (2017)
Permanent modifications in silica produced by ion-induced high electronic excitation: experiments and atomistic simulations
144: (2017)
Temperature dependence of underdense nanostructure formation in tungsten under helium irradiation
145: (2017)
Understanding the ion-induced elongation of silver nanoparticles embedded in silica
146: (2017)
Understanding the ion-induced elongation of silver nanoparticles embedded in silica
147: (2018)
Self-modulation and anomalous collective scattering of laser produced intense ion beam in plasmas
148: (2018)
Spectral composition of thermonuclear particle and recoil nuclear emissions from laser fusion targets intended for modern ignition experiments
14 Capítulos de libros
1: (2007)
Advances in materials physics for IFE at DENIM
2: (2007)
Advances in target design and materials physics for IFE at DENIM
3: (2007)
Atomistic simulations of displacement cascades in fused silica: It is compared with different concentration of H in the bulk
4: (2007)
Hybrid nuclear cycles for nuclear fission sustainability
5: (2007)
Irradiation facilities for materials research: IFMIF and small scale installations
6: (2007)
Monte Carlo simulations of electron irradiation damage in hcp metals
7: (2007)
Recent results on fast ignition jet impact scheme
8: (2008)
Molecular dynamics study of defect in amorphous silica; generation and migration
9: (2008)
3D neutronic calculations: CAD-MCNP methodology applied to vessel activation in KOYO-F
10: (2010)
La fusión nuclear y su proyección como fuente masiva de energía
11: (2011)
Molecular dynamics of Liquid Li and Pb
12: (2011)
Technofusion: Opportunities for the Inertial Confinement Fusion Community
13: (2011)
Thermo-mechanical simulations applied to the development of nuclear fusion devices
14: (2018)
Experimental and multiscale computer simulation studies of the influence of grain boundaries on radiation-induced damage and on hydrogen behaviour in tungsten
24 Conferencias invitadas en congresos
1: (2008)
ANS 18th Topical Meeting on Technology of Fusion Energy 2008 (TOFE 2008)
2: (2009)
14th International Conference on Emerging Nuclear Energy Systems (ICENES'09)
3: (2009)
36th International Conference on Plasma Science and 23rd Symposium on Fusion Engineering
4: (2009)
4th International Conference on the Frontiers of Plasma Physics and Technology
5: (2009)
6st International Conference on Inertial Fusion Sciences and Applications (IFSA2009)
6: (2010)
Chamber responses and Safety and Fusion Technology in HiPER facility
7: (2010)
Chamber responses for Repetitive Chamber as HiPER, Advanced Target Materials and Materials under Irradiation for IAEA CRP
8: (2010)
Chamber Safety and Fusion Technology in HiPER facility
9: (2010)
Chamber Safety and Fusion Technology in HiPER facility and modelling of advanced materials
10: (2010)
High Repetition Rate Target Area Designs and Safety and Fusion Technology
11: (2010)
HiPER - The European Path to Inertial Fusion Energy
12: (2010)
HiPER Safety and Fusion Technology
13: (2010)
IFE Reactor Technologies: Justification and Pathways Blankets. Materials First Wall, Optics, Structural Materials. Damage, Neutronics, Safety and RadioProtection
14: (2010)
Inertial Fusion Energy Materials under Irradiation
15: (2010)
Inertial Fusion Energy Technology
16: (2010)
Liquid (Pb-Li) Molecular Dynamics simulation: Multiscale approach (from Quantum to Classical).
17: (2010)
Multiscale Modeling of Irradiated Materials
18: (2012)
Approach to Power Plant Physics and Technology in Laser Fusion Energy Systems under Repetitive Operation
19: (2012)
Approach to Power Plant Physics and Technology in Laser Fusion Energy Systems under Repetitive Operation
20: (2012)
HiPER design and technologies
21: (2012)
Ultraintense Lasers Applied to Laser Fusion Material Testing: Production of Ions, X rays and Neutrons
22: (2012)
Ultraintense Lasers Applied to Laser Fusion Material Testing: Production of Ions, X rays and Neutrons
23: (2018)
Fabrication of ultra-monodisperse colloidal gold nanorods by means of femtosecond laser irradiation
24: (2018)
Fabrication of ultra-monodisperse colloidal gold nanorods by means of femtosecond laser irradiation
4 Cursos, seminarios y tutoriales
1: (2009)
Uso de los neutrones en Biologia
2: (2012)
Giant materials damage by purely ionizing radiation: the role of NIF
3: (2012)
Inertial fusion energy by laser: state of art projections to reactor materials
4: (2012)
Object Kinetic Monte Carlo simulations for Fe-Cr alloys in the dilute limit
1 Libros
1: (2007)
29th International Conference on Laser Interaction with Matter
4 Otras Publicaciones
1: (2008)
2nd RCM on Patways to Energy from Inertial Fusion ¿ An Integrated Approach
2: (2008)
22nd International IAEA Fusion Energy Conference
3: (2008)
30th European Conference on Laser Interaction with Matter (XXX ECLIM)
4: (2008)
35th EPS Plasma Physics Conference (10th International Workshop on Fast Ignition of Fusion Targets)
191 Ponencia en Congresos
1: (2007)
Advances in Materials Physics at DENIM
2: (2007)
Evaluation including time evolution, of neutron production from d-d and other reactions in the EVEDA accelerator prototype (including beam dump). Evolution of neutron induced activation and dose rates in the accelerator components
3: (2007)
Evaluation of different chemical form of tritium in normal condition in an internal regenerator cycle of the demo reactor of fusion
4: (2007)
Evaluation of permeable and non-permeable tritium in normal condition in a fusion reactor
5: (2007)
He and H production and induced Swelling in KOYO-F
6: (2007)
Irradiation facilities for materials research: IFMIF and small scale installations
7: (2007)
Kinetic Monte Carlo modelling of neutron irradiation damage in iron
8: (2007)
Modelling on Fe-Cr Microstructure: Evolution with Cr content
9: (2007)
Molecular dynamics study of hydrogen isotopes migration in optics
10: (2007)
Target for fusion technology
11: (2007)
Target manufacturing and delivery and fusion technology risks in HiPER
12: (2007)
3D Neutronic Calculations: CAD-MCNP Methodology applied to Vessel Activation in KOYO-F
13: (2008)
Damage, Fluidynamics and Tritium handling in IFE reactors
14: (2008)
Decay Gamma Dose Rates in the EVEDA accelerator: Impact of the deuteron losses uncertainties in the accelerator maintenance.
15: (2008)
Gamma dose distribution optimization in devices for testing facilities of remote handling systems for fusion technology: methodology and results
16: (2008)
Kinetic Monte Carlo simulations of Helium implantation and desorption from Nickel
17: (2008)
Progress in Inertial Fusion and Fusion Technology at DENIM
18: (2008)
Radiative shocks in the context of Young Stellar Objects: a combined analysis from experiments and simulations
19: (2008)
Target Physics and Materials for Inertial Fusion and Fusion Technology at DENIM
20: (2008)
3D CAD-MCNP methodology applied to neutronic irradiation effects analysis in KOYO-F
21: (2009)
Deffect energetics in FeCr from empirical interatomic potentials
22: (2009)
Methodology for study of Chamber Damage and Activation effects in IFE HiPER facility
23: (2009)
Shock Wave Propagation in Nano-Structured Materials For Fusion Applications
24: (2009)
TechnoFusión: A new centre for the development of fusion technologies and fusion reactor devices
25: (2009)
TECNO_FUS: A Breeding Blanket NFT programme developing dual functional He/Pb15.7Li systems engineering & associated underlying technologies
26: (2010)
Atomistic view of shock wave propagation in materials
27: (2010)
CONSEQUENCES OF DIFFERENT METEOROLOGICAL SCENARIOS IN THE ENVIRONMENTAL IMPACT ASSESMENT OF TRITIUM RELEASE
28: (2010)
ESS TARGET PERFORMANCE FOR DIFFERENT BEAM PULSES
29: (2010)
Experimental determination of Sieverts¿ solubility constant and diffusion values for H2and D2in LiPb eutectic
30: (2010)
ì-ERD and ì-PIXE characterization of H as-implanted and post-implanted annealed oxide dispersion strengthened steel for fusion applications
31: (2010)
Key paramaters in the design of HiPER reaction chamber
32: (2010)
Lithium lead eutectic alloys: A Multiscale approach from QMD to CMD
33: (2010)
Lithium lead eutectic alloys: A Multiscale approach from QMD to CMD
34: (2010)
Materials research for HiPER laser fusion facilities: chamber wall, structural material and final optics
35: (2010)
MD. Multiscale studies supporting lithium-lead eutectic alloy database
36: (2010)
MD multiscale studies supporting lithium-lead eutectic alloy database
37: (2010)
Nanoscale Issues in Advanced Materials for Inertial Fusion technology
38: (2010)
Nanoscale issues in new advanced materials for inertial fusion targets
39: (2010)
Potential common radiation problems for components and diagnostics in future magnetic and inertial confinement fusion devices
40: (2010)
Radiation Damage in Nano-Structured Materials
41: (2010)
Resistivity Recovery curves of electron-irradiated FeCr alloys with Object Kinetic Monte Carlo: influence of Cr interctions.
42: (2010)
Simulations of Resistivity Recovery curves of electron-irradiated dilute FeCr alloys using an Object Kinetic Monte Carlo Model.
43: (2010)
TECNOLOGIAS DE CARACTERIZACIÓN DE MATERIALES PARA FUSION Y SU DESARROLLO EN LA INSTALACION TECHNOFUSION
44: (2010)
The Effect of Cr Concentration on Defec tEnergies in FeCr Alloys
45: (2010)
The Importance of the Interaction Radius Between Cr and Self-interstitial Fe in Object Kinetic Monte Carlo Calculations of Irradiated FeCr Diluted Alloys
46: (2010)
The Role of the Spatial and Temporal Radiation Deposition in Inertial Fusion Chambers: The case of HiPER
47: (2011)
An overview on armor research for the laser fusion project HiPER (POSTER)
48: (2011)
Application of Ultraintense Lasers to validate materials for laser fusion: production of ions and other relevant species
49: (2011)
Assessment of the behaviour of hidrogen isotopes and helio in the W armor for inertial confinement
50: (2011)
Chamber and blanket dynamics and safety in HiPER IFE project under repetitive operation
51: (2011)
Differences into HT and HTO concentrations in air into the Western Mediterranean and Continental Europe and Safety Related Issues.
52: (2011)
Diffusion Issues of Heat and Light Species in Laser Fusion Devices
53: (2011)
Diffusion of Temperature and Light Species between Armor and Structural Material in Inertial Fusion Reaction Chambers: a Case for HiPER. (POSTER)
54: (2011)
Formación y entrenamiento de ingenieros nucleares mediante el máster de Ciencia y Tecnología nuclear de la UPM
55: (2011)
IFE Plant Technology Overview and contribution to HiPER proposal
56: (2011)
Influence of termal fluctuations in radiation damage cascade production and defect dynamics in tungsten (POSTER)
57: (2011)
Interstitial defects stability in FeCr alloys vs Cr concentration
58: (2011)
Li & Pb MD Sinulations
59: (2011)
Li & Pb MD Sinulations (oral)
60: (2011)
Lifetime of silica final lenses subject to HiPER irradiation conditions
61: (2011)
Liquid lead and Lithium. A Comprehensive molecular dynamics study (poster)
62: (2011)
Liquid metals and lithium lead eutectic alloys: MD simulation (presentación oral)
63: (2011)
Molecular dynamics simulations of lead and lithium in liquid phase
64: (2011)
Multi-scale study of hydrogen isotopes structural properties in solid phase in the context of inertial fusion target manufacturing
65: (2011)
New simulations to qualify eutectic lithium lead as a breeder material
66: (2011)
New simulations to qualify eutectic lithium-lead as breeder material (POSTER)
67: (2011)
Quantum Molecular Dynamics and Ab initio Studies of The Crystal Structure of Hydrogen Isotopes Near Triple Point (POSTER)
68: (2011)
Silica final lenses under HiPER laser fusion reactor operation conditions (POSTER)
69: (2011)
Studies of a Self Cooled Lead Lithium blanket for HiPER Reactor
70: (2011)
Synchrotron X-ray photoabsorption spectroscopy of plasmas
71: (2011)
Synchrotron X-ray photoabsorption spectroscopy of plasmas (POSTER)
72: (2011)
TechnoFusion: new Spanish singular scientific-technical facility for fusion research
73: (2011)
Temperature Evolution and Light Species Diffusion in Armor and Structural Material for Inertial Fusion Reactor Chambers: a Case for HiPER 4a (POSTER)
74: (2011)
Validation of real time dispersion of Tritium clouds over the Western Mediterranean Basin in different assesments
75: (2012)
Ab initio Methodology for Calculating Elastic Constant and Sound Velocity for Hydrogen and Deuterium in Molecular Solid Phase (POSTER)
76: (2012)
Atmospheric Modelling of Tritium forms transport: review of capabilities and R&D needs for the assessment of fusion facilities environmental impact
77: (2012)
Capabilities of nanostructured W as Plasma Facing Material in future fusion reactors
78: (2012)
Conceptual design of liquid lithium laboratory in the TECHNOFUSION project (POSTER)
79: (2012)
Crack mechanical failure in ceramic materials under ion irradiation: case of lithium niobate crystal
80: (2012)
Crecimiento de materiales nanoestructurados para primera pared: Tungsteno
81: (2012)
Extended finite element simulations of crack mechanical failure in ceramics under ion irradiation
82: (2012)
H diffusion in nanoestructured as compared to massive W
83: (2012)
H diffusion in nanoestructured as compared to massive W
84: (2012)
Imaging of Li distribution in Li-ion batteries by Particle-Induced Gamma-ray Emission using Proton Microbeam (POSTER)
85: (2012)
Laser Driven Neutron Sources: Characteristics, Applications and Prospects
86: (2012)
Lifetime of the final optics under HiPER irradiation conditions
87: (2012)
Modeling of electron and lattice thermodynamics in swift ion semiconductor interaction
88: (2012)
Nanocrystals in the Manufacture of Target for Inertial Confinement Fusion (POSTER)
89: (2012)
Nanostructured tungsten as a first wall material for the future nuclear fusion reactors
90: (2012)
Nanostructured tungsten as a first wall material for the future nuclear fusion reactors
91: (2012)
Neutronics and activation of the preliminary reacion chamber of HiPER reactor based in a SCLL blanket (POSTER)
92: (2012)
Plasma facing materials for fusion reactor applications
93: (2012)
Plasma facing materials for fusion reactor applications (POSTER)
94: (2012)
PLASMA-WALL INTERACTION IN LASER FUSION REACTORS: NEW PLASMA AND LASER
95: (2012)
Power Plant Physics and Technology in HIPER IFE Projetc under Repetitive Operation
96: (2012)
Quantum Molecular Dynamics and Ab initio Studies of The Crystal Structure of Hydrogen and Deuterium
97: (2012)
Self Cooled Lead Lithium blanket and reactor for HiPER
98: (2012)
Silica final lensperformance in laser fusion facilities: HiPER and LIFE
99: (2012)
Simulación Ab Initio de los Isótopos de Hidrógeno en Altas Presiones
100: (2012)
Stability of vacancy clusters in FeCr alloys: A study of the Cr concentration dependence
101: (2012)
Stopping of á Particles from the Core in Corona Plasmas
102: (2012)
Technology in HiPER IFE Project under Repetitive Operation
103: (2012)
The technofusion project for fusion technology development: opportunities for the inertial community
104: (2012)
The technofusion project for fusion technology development: opportunities for the inertial community (POSTER)
105: (2012)
The use of the ESS Bilbao installations for laser fusion studies
106: (2012)
ULTRAINTENSE LASERS APPLIED TO LASER FUSION MATERIAL TESTING: PRODUCTION OF IONS, X RAYS AND NEUTRONS
107: (2012)
Ultraintense Lasers applied to laser fusion material testing: production of ions, X rays and neutrons
108: (2013)
Ab Initio Calculation of the Speed of Sound for Mixtures of Solid Molecular Hydrogen-Deuterium
109: (2013)
An Object Kinetic Monte Carlo Approach to Helium Interaction with Grain Boundaries in Tungsten (ORAL)
110: (2013)
Bulk Modulus for Solid Molecular Tritium: Ab Inito Aproximation
111: (2013)
Capabilities of Nanostructured W as Plasma Facing Material in future fusion reactors
112: (2013)
Comparative study of high energy ion beam-irradiation effects on quartz and silica based on in-situ optical measurements (Oral)
113: (2013)
Defect evolution in Tungsten under Helium irradiation: a comparison with experimental results (POSTER)
114: (2013)
DEVELOPMENT OF MATERIALS FOR THE FIRST WALL OF A NUCLEAR FUSION REACTOR
115: (2013)
DEVELOPMENT OF MATERIALS FOR THE FIRST WALL OF A NUCLEAR FUSION REACTOR
116: (2013)
Hydrogen accumulation in nanoestructured as compared to massive W
117: (2013)
Hydrogen accumulation in nanoestructured as compared to massive W (POSTER)
118: (2013)
INFLUENCE OF THE MICROESTRUCTURE ON THE LIGHT SPECIES BEHAVIOUR IN IRRADIATED MATERIALS
119: (2013)
MODELING FIRST WALL MECHANICAL FRACTURE DUE TO THERMAL SHOCKS USING X-FEM
120: (2013)
Nanostructured tungsten as plasma facing material for nuclear fusion reactor applications
121: (2013)
OKMC calculations of irradiated W (Oral)
122: (2013)
Problems and Solution of Radiation Damage in Optics of Laser Fusion (POSTER)
123: (2013)
Structural properties of hydrogen isotopes in solid phase in the context of inertial fusion target manufacturing
124: (2013)
Study of the use of ESS-Bilbao for Irradiation of Nuclear Fusion Materials
125: (2013)
Study of the Use of ESS-BILBAO for Irradiation of Nuclear Fusion Materials. (Poster)
126: (2013)
The Nuclear Science and Technology master at the Universidad Politecnica de Madrid
127: (2013)
Theoretical modeling of carrier dynamics and damage processes in materials interacting with intense radiation sources
128: (2013)
Tritium Extraction System Pipe Break Environmental Impact by Atmospheric Modelling of Tritium Forms Transport,
129: (2013)
Tungsten coatings by HIPIMS as plasma facing material for nuclear fusion reactor applications
130: (2013)
Tuning nanostructured W deposition procedure to decrease the state stress and to improve the adhesion
131: (2013)
Tuning nanostructured W deposition procedure to decrease the state stress and to improve the adhesion
132: (2013)
W thin films by HIPIMS as plasma facing material for nuclear fusion reactor applications (POSTER)
133: (2014)
A multiscale approach to defect evolution and stress generation in tungsten under helium irradiation (Poster)
134: (2014)
Ab initio simulation study of interfaces in nanostructured tungsten
135: (2014)
Ab initio simulation study of interfaces in nanostructured Tungsten (poster)
136: (2014)
Adhesion and mechanical properties of implanted nanostructured tungsten (Poster)
137: (2014)
An Object Kinetic Monte Carlo comparison of helium retention in nanocrystalline tungsten and monocrystalline tungsten (Poster)
138: (2014)
Are Nanostructured materials more resistant to irradiation? Grain boundaries and hydrogen in Tungsten
139: (2014)
Are Nanostructured materials more resistant to irradiation?: Grain boundaries and hydrogen in Tungsten (Invitada)
140: (2014)
Atomistic simulations of ion irradiation-induced nanotracks
141: (2014)
FeCr alloys simulation, leading structural materials candidates in nuclear reactors
142: (2014)
From ion irradiation-induced high electronic excitation in silica to permanent modification in structural, optical and mechanical properties
143: (2014)
Hydrogen accumulation in nanostructured as compared to massive W (Poster)
144: (2014)
Imaging of Li distribution in Li-ion batteries by direct elemental detection technique of PIGE and NRA combined with proton microbeam at TIARA (Poster)
145: (2014)
Linking atomistic, kinetic Monte Carlo and crystal plasticity simulations of single-crystal Tungsten strength
146: (2014)
Mechanical response to swift ion irradiation-induced nano-tracks in silica (Poster)
147: (2014)
Microstructure, mechanical properties and wear performance of nanostructured tungsten coatings for fusion applications
148: (2014)
Morphology, microstructure and stress-state characterization of nanostructured tungsten
149: (2014)
Morphology, microstructure and stress-state characterization of nanostructured tungsten
150: (2014)
Optical properties of silica irradiated with swift heavy ions
151: (2014)
Plasmodio nanoparticles under irradiation
152: (2014)
Simulation of tracks in silica with embedded silver nanoparticles
153: (2014)
The effect of Cr concentration on single interstitials stability in FeCr alloys
154: (2014)
The influence of substrate-bias on the HIPIMS Tungsten films
155: (2014)
The role of grain boundaries on light species behavior in nanostructured tungsten
156: (2014)
The role of grain boundaries on light species behavior in nanostrutured W (Posetr)
157: (2014)
Ultra-intense laser irradiation induced-high electronic excitation in bandgap materials: a quantum-kinetic model based on Boltzmann equation.
158: (2015)
Materials Development for IFE Systems at the Institute of Nuclear Fusion
159: (2015)
Capabilities of nanostructured tungsten for plasma facing material
160: (2015)
Capabilities of nanostructured tungsten for plasma facing material
161: (2015)
Coatings production for civil and military markets
162: (2015)
Conceptual Design of Silica Transmission Final Lenses for Laser Fusion Chambers.
163: (2015)
Defect Evolution in Irradiated Nano- and Poly-Crystalline Tungsten under Realistic Nuclear Fusion Irradiation Conditions: the Valuable Role of Object Kinetic Monte Carlo Methods.
164: (2015)
Development of high corrosion-resistant coatings for the inside of pipes
165: (2015)
Final focussing components for a laser fusion power plant.
166: (2015)
Modelling Cr segregation to radiation defects in FeCr alloys
167: (2015)
Multiscale integral analysis of non-operational tritium leakages in nuclear power plants Tritium analysis team
168: (2015)
Role of tungsten nanostructure on pulsed helium irradiation-induced defects
169: (2015)
Simulation of ion radiation in optical materials. SPIE Optics+Optoelectronics 2015, Praga.
170: (2015)
Temperature effects on on the hydrogen content nanostructured W films
171: (2016)
Asymmetric RN Threats: A Spotlight on the New Security Context in the Middle East.
172: (2016)
Atomistic simulations of optical materials under irradiation for nuclear fusion power plants
173: (2016)
Coarse-grained and nanostructured tungsten under ion irradiation for nuclear fusion feasibility studies: An object kinetic Monte Carlo description
174: (2016)
Effect of organic stabilizers over silver nanoparticles fabricated by femtosecond pulsed laser ablation.
175: (2016)
Embedded silver nanoparticle multilayers fabricated by femtosecond puled laser deposition
176: (2016)
Ion irradiation-induced high electronic excitation in silica: bulk and surface analysis by means of atomistic simulations.
177: (2016)
Molecular dynamics simulation of embedded silver nano-particles in silica: elongation analysis.
178: (2016)
Multiscale integral analysis of tritium leakages in fusion nuclear power plants
179: (2016)
Nanoparticle multilayers and colloidal solutions of silver nanoparticles synthesized by femtosecond pulsed laser ablation
180: (2016)
Study of the grain thermal stability in the nanostructured tungsten coatings
181: (2017)
Silica final lens systems for laser fusion power plants
182: (2017)
Behaviour of nanostructured and coarse-grained tungsten under pulsed irradiation in a plasma focus device. PRESENTACIÓN ORAL.
183: (2017)
Elongation of metallic nanoparticles embedded in a dielectric matrix produced by irradiation with swift heavy ions
184: (2017)
In situ monitoring and modeling the optical properties of silica irradiated with swift heavy ions
185: (2017)
In situ monitoring the optical properties of silica and modeling of its surface density kinetics irradiated with swift heavy ions. PRESENTACIÓN ORAL
186: (2017)
Relation of the temperature dependence of W fuzz formation with defect trapping
187: (2017)
Synthesis of silver nanoparticles by femtosecond pulsed laser ablation: fabrication of embedded nanoparticle multilayers and colloidal solutions. POSTER.
188: (2017)
Understanding the ion-induced elongation of silver nanoparticles embedded in silica
189: (2018)
Fabrication of metallic nanostructures for energy applications
190: (2018)
Fabrication of ultra-monodisperse colloidal gold nanorods by means of femtosecond laser irradiation
191: (2018)
In situ study of the ion-induced elongation of silver nanoparticles embedded in silica
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2020 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
