Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
INVESTIGADORES
ESTRUCTURAS DE I+D+I
ACTIVIDAD INVESTIGADORA
INNOVACIÓN
Investigador
Andres Diaz Lantada
Categoría Investigador
TITULAR UNIVERSIDAD
Escuela UPM
E.T.S. DE INGENIEROS INDUSTRIALES
Departamento:
INGENIERÍA MECÁNICA (N)
Area Conocimiento
INGENIERIA MECANICA
Grupo de Investigación:
GI-IM: Grupo de Investigación en Ingeniería de Máquinas
Email (Directorio UPM)
andres.diaz
upm.es
Teléfono (Directorio UPM)
910677258
Datos de Memorias relacionados
Proyectos de I+D+i y generación de recursos
43 Proyectos de I+D+i
1: (2007)
ARCHISENS: ARCHITECTURE SENSORS AND MICROCOMPONENTS
2: (2007)
DEPPLÁS (Desarrollo de Productos en Plástico)
3: (2007)
DIIM (Docencia Integrada en Ingeniería de Máquinas)
4: (2007)
ELABORACION DE UN LIBRO Y UNA ASIGNATURA DE "HISTORIA DE LAS MAQUINAS"
5: (2007)
FEMAB: FÉRULA MICROINSTRUMENTADA ANTIBRUXISMO
6: (2007)
Importancia de la Historia de las Máquinas en la Docencia de Ingeniería Mecánica
7: (2008)
Mejora para la docencia integrada de maquinas M-DIM
8: (2008)
Modelo Predictivo para Contactos con Lubricación Elastohidrodinámica
9: (2009)
Caracterización de la conductividad térmica en probetas de hormigón mediante el empleo combinado de termografía infrarroja y herramientas CAD-CAE
10: (2009)
INDIMA: Integración de prácticas de diseño de máquinas
11: (2009)
MODELO PREDICTIVO PARA CONTACTOS CON LUBRICACION ELASTOHIDRODINAMICA
12: (2009)
Transdata - Sistema transaccional inalámbrico de datos
13: (2010)
RAPID MANIFACTURING (IBE RM)
14: (2010)
Redes Neronales artificiales para predecir la eficiencia energética y el desgaste en contactos tribológicos
15: (2011)
Estudio sobre comportamiento del calce descarrilador en la red convencional
16: (2011)
Experiencias de aprendizaje basado en proyectos
17: (2011)
IBE-Rapid Manufacturing
18: (2011)
Nuevas soluciones para ingeniería de tejidos y biofabricación: Fabricación rápida de scaffolds fractales en biopolímeros fotosensibles y elastómeros para promocionar el crecimiento celular
19: (2011)
Trabajos de Desarrollo de Productos (Diseño, Modelado y Fabricación de Prototipos Rápidos) según MODELOS 5 ENCARGOS DE EMPRESAS
20: (2013)
Análisis de influencia de los lubricantes en la eficiencia energética y la fatiga superficial de transmisiones mecánicas.
21: (2013)
ASESORIA PARA EL DISEÑO, DESARROLLO Y VALIDACIÓN INTERNACIONAL DE DOS LABS ON A CHIP PARA DIAGNOSTICO EN EL PUNTO DE ATENCIÓN DE PACIENTES
22: (2013)
HERRAMIENTA ORIENTADA AL DISEÑO DEL LUBRICANTE PARA POTENCIAR LA RESISTENCIA FRENTE AL MICROPITTING DE UN CONTACTO LUBRICADO
23: (2013)
Modelado de los contactos lineales en las multiplicadoras de aerogeneradores para predecir la aparición de micropitting
24: (2013)
Proyecto Diagnochip: Desarrollo de microsistema para realización de antibiograma portátil
25: (2013)
Trabajos de Desarrollo de Productos (Diseño, Modelado y Fabricación de Prototipos Rápidos) según MODELOS 5 ENCARGOS DE EMPRESAS
26: (2013)
VALIDAACION DE LA PLATAFORMA HYBRID PARA LA MODELIZACION Y EL ENTRENAMIENTO DE LA MARCHA
27: (2014)
CONSTRUCCIÓN DE PROTOTIPOS DE DISPOSITIVOS DE LA REGULACIÓN INTRAOCULAR PARA PACIENTES DE GLAUCOMA
28: (2014)
Trabajos de Desarrollo de Productos (Diseño, Modelado y Fabricación de Prototipos Rápidos) según MODELOS 5 ENCARGOS DE EMPRESAS
29: (2015)
: Modernización y equipamiento complementario del Laboratorio de Resistencia de Materiales
30: (2015)
: Herramientas para valorar la utilización de aceites fuel-economy y de superficies texturizadas
31: (2015)
CONSTRUCCIÓN DE PROTOTIPOS DE DISPOSITIVOS DE LA REGULACIÓN INTRAOCULAR PARA PACIENTES DE GLAUCOMA
32: (2015)
DESARROLLO CONCEPTUAL DE UN SISTEMA DE ACUMULACION ENERGÉTICA PARA MATERIAL RODANTE FERROVIARIO
33: (2015)
HOUSESS: Highly optimized unit for sustainable enhanced solar system: HOUSESS
34: (2015)
RENERSEG: Nuevo conjunto de rodadura para la mejora de la eficiencia energética y la seguridad en trenes de pasajeros
35: (2015)
ToMax: Toolless Manufacturing of Complex Structures
36: (2016)
CONSTRUCCIÓN DE PROTOTIPOS DE DISPOSITIVOS DE LA REGULACIÓN INTRAOCULAR PARA PACIENTES DE GLAUCOMA
37: (2016)
CONSTRUCCIÓN DE PROTOTIPOS DE DISPOSITIVOS DE LA REGULACIÓN INTRAOCULAR PARA PACIENTES DE GLAUCOMA
38: (2016)
EURO-AFRICAN OPEN BIOMEDICAL ENGINEERING E-PLATFORM FOR INNOVATION THROUGH EDUCATION
39: (2017)
TOMAX: TOOLLESS MANUFACTURE OF COMPLEX GEOMETRIES
40: (2017)
UBORA: Euro-African Open Biomedical Engineering e-Platform for Innovation through Education
41: (2018)
NUEVO CONJUNTO DE RODADURA PARA LA MEJORA DE EFICIENCIA ENERGÉTICA Y LA SEGURIDAD EN TRENES DE PASAJEROS
42: (2018)
TOMAX: TOOLLESS MANUFACTURE OF COMPLEX GEOMETRIES
43: (2019)
TALENANO: Estudio de la eficacia de tecnologías alternativas de liberación de energía térmica y mecánica mediante nanoestructuras de oxido de hierro y de oro con aplicación en terapias
Formación de Investigadores y Movilidad
6 Estancias y sabáticos recogidos en programas oficiales
1: (2011)
New solutions for tissue engineering and biofabrication: Design and additive manufacture of fractal scaffolds in bioelastomers.
2: (2012)
INSTITUT FUR WERKSTOFFTECHNIK UND WERLTOFFWISSENSCHAFTEN TECHNISCHE UNIVERSITAT WIEN.
3: (2013)
Movilidad de profesor en el marco del Programa EAGLES (Engineers as Global Leaders for Energy Sustainability)
4: (2017)
INTRODUCTION TO 4D PRINTING OF SMART MEDICAL DEVICES: TOWARDS LOW-COST PERSONALIZED
5: (2017)
4D Printing of Smart Medical Devices: Towards Low-Cost Personalized Self-Sensing Solutions?
6: (2019)
Investigador Post-doctoral en el Instituto de Mocrostructure Technology del Karlsruhe Institute of Technology
5 Tesis Doctorales
1: (2008)
Metodología para el desarrollo de dispositivos médicos basados en el empleo de polímeros activos como sensores y actuadores
2: (2009)
Metodología para el desarrollo de dispositivos médicos basados en el empleo de polímeros activos como sensores y actuadores
3: (2017)
'VARIABLE-STIFFNESS JOINTS WITH EMBEDDED FORCE SENSOR FOR HIGH-PERFORMANCE WEARABLE GAIT EXOSKELETONS
4: (2018)
Design strategies for additive manufacturing using VAT photopolymerization systems
5: (2019)
Systematic research of physicochemical properties of functional photopolymers for additive manufacturing
Difusión de Resultados de Investigación
121 Artículos en revistas
1: (2007)
Teaching Applications for Rapid Prototyping Technologies
2: (2008)
Application of Process Re-Engineering Methods to Enhance the Teaching-Learning Process in a Mechanical Engineering Department
3: (2008)
Models for predicting friction coefficient and parameters with influence in elastohydrodynamic lubrication
4: (2008)
Physical ageing of a PU based shape memory polymer: influence on their applicability to the development of medical devices.
5: (2008)
Simulink model for teaching the stick slip friction phenomenon in Machine Vibration and Noise course.
6: (2008)
Towards complete product development teaching employing combined CAD-CAE-CAM technologies
7: (2009)
Application of Process Re-Engineering Methods to Enhance the Teaching-Learning Process in a Mechanical Engineering Department
8: (2009)
Models for predicting friction coefficient and parameters with influence in elastohydrodynamic lubrication
9: (2009)
Physical ageing of a PU based shape memory polymer: influence on their applicability to the development of medical devices
10: (2009)
Simulink model for teaching the stick slip friction phenomenon in Machine Vibration and Noise course
11: (2009)
Towards complete product development teaching employing combined CAD-CAE-CAM technologies
12: (2010)
Cálculo de la ersistencia a la fatiga superficial en superficies con lubricación elastohidrodinámica mediante el criterio de Dag Van.
13: (2010)
Caracterización del comportamiento reológico de lubricantes mediante ensayo en tribómetro
14: (2010)
Comparative study of CAD-CAE programs taking account of the opinions of students and teachers. Computers Applications in Engineering Education
15: (2010)
Comprobación experimental de la optimización en peso de vigas tipo sandwich sometidas a flexión pura.
16: (2010)
Desarrollo de un sistema de ensayo de grandes deflexiones para vigas tipo sandwich que trabajan a flexión pura
17: (2010)
Design and rapid prototypong of DLC coated fractal surfaces for tissue engineering applications
18: (2010)
Development of Personalized Annuloplasty Rings: Combination of CT Images and CAD-CAM Tools
19: (2010)
Intelligent structures based on the improved activation of shape memory polymers using Peltier cells
20: (2010)
Intelligent structures based on the improved activation of shape memory polymers using Peltier cells
21: (2010)
La opinión de los Alumnos como herramienta para el control de la calidad
22: (2010)
Listening to Students as a Way of Improving Teaching: Application of QFD-Based Techniques to a Final Year Subject
23: (2010)
Listening to students as a xay of enhancing teaching quality: Application of QFD-based techniques to a final year subject.
24: (2010)
Neural Network approach to modelling the behavior of quantum tunnelling composites as multifuntional sesors
25: (2010)
Neural network approach to modelling the behaviour of quantum tunnelling composites as multifunctional sensors
26: (2010)
Predicción del coeficiente de fricción a contactos puntuales con lubricación elastohidrodinámica
27: (2010)
Quantum tunnelling Composites: Characterisation and modelling to promote their applications as sensors.
28: (2010)
Quantum tunnelling composites Characterisation and modelling to promote their applications as sensors
29: (2010)
Resolución del problema TEHD puntual y su aplicación a la predicción del coeficiente de fricción.
30: (2010)
Towards complete product development teaching employing combined CAD-CAE-CAM technologies.
31: (2010)
Towards Complete Product Development Teaching Employing Combined CAD-CAM-CAE Technologies
32: (2011)
Analytical model for predicting the friction coefficient in point contacts with thermal elastohydrodynamic lubrication
33: (2011)
Interactive Simulations of the Performance of Hydrodynamic Bearings in the 'Machine Design' Course
34: (2011)
Learning Through Play in a Final Year Subject: Enjoyable Design Experience for Teaching Product Development
35: (2011)
Learning through Play in Engineering Education-Part 2
36: (2011)
On the use of variable bending stiffness clothoidal strips for the analysis and synthesis of the torque - angle turned curve in spiral torsion springs
37: (2011)
Simple Hill-type testing system for pure bending tests with large deflections
38: (2011)
Simple Hill-type testing system for pure bending tests with large deflections
39: (2011)
Special Issue Learning through Play in Engineering Education-Part 1
40: (2012)
Analytical model for predicting the friction coefficient in point contacts with thermal elastohydrodynamic lubrication.
41: (2012)
Comparative study of auxetic geometrics by means of computer-aided design and engineering
42: (2012)
Interactive simulations of the performance of hydrodynamic bearing in he
43: (2012)
Novel System for Bite-Force Sensing and Monitoring Based on Magnetic Near Field Communication
44: (2012)
PREPARING MECHANICAL ENGINEERING STUDENTS FOR PRODUCT DESIGN PROFESSIONAL PRACTICE THROUGH PBL: PLANNING AND EXECUTION OF THE SUBJECT "PRODUCT DESIGN METHODOLOGY"
45: (2012)
Rapid prototyping for biomedical engineering: Current capabilities and Challenges.
46: (2012)
Tissue Engineering Using Novel Rapid Prototyped Diamond-Like Carbon Coated Scaffolds
47: (2013)
'Analysis of different multiaxial fatigue criteria in the prediction of pitting in spur gears'
48: (2013)
Artificial neural network approach to predict the lubricated friction coefficient
49: (2013)
Comparative Study of CAD-CAE Programs Taking Account of the Opinions of Students and Teachers
50: (2013)
Comparative study of potential pentamodal metamaterials inspired by Bravais lattices
51: (2013)
Fractals in tissue engineering: toward biomimetic cell-culture matrices, microsystems and microstructured implants
52: (2013)
On the use of variable bending stiffness clothoidal strips for the analysis and synthesis of low variability torque-angle turned curves in spiral torsion springs
53: (2013)
Optimising lubricated friction coefficient by surface texturing
54: (2013)
Study of Collaboration Activities between Academia and Industry for Improving the Teaching-Learning Process
55: (2013)
The Impact of collaboration between academia and industry on Engineering Education
56: (2013)
Towards Low-Cost Effective and Homogeneous Thermal Activation of Shape Memory Polymers
57: (2013)
Towards Successful Project-Based Teaching-Learning Experiences in Engineering Education
58: (2014)
Artificial neural network approach to predict the lubricated friction
59: (2014)
Combining smart materials for enhancing intelligent systems: initial studies, sucess cases and research trends
60: (2014)
'Deep reactive ion etching of auxentid structures: Current capabilities and challenges'
61: (2014)
Direct laser writing of auxetic structures: present capabilities and challenges
62: (2014)
'Direct laser writing of fractal surfaces: Strategy to design and manufacture textured materials'
63: (2014)
Engineering Education: Beyond Technical Skills
64: (2014)
'Free-form rapid-prototyped PDMS scaffolds incorporating growth factors promote chondrogenesis'
65: (2014)
Promotion of Professional Skills in Engineering Education: Strategies and Challenges
66: (2014)
Promotion of Professional Skills in Engineering Education: Strategies and Challenges
67: (2014)
Promotion of Professional skills in Engineering Education: Strategies and Challenges
68: (2014)
'Rapid Prototyping of multi-scale biomedical mecrodevices by combining additive manufacturing technologies'
69: (2014)
'Robust fabrication of electrospun-like polymer matrs to direct cell bahavior'
70: (2014)
Towards mass production of microtestured microdevices: linking rapid prototyping with microinjection molding
71: (2015)
Analytical Model for prediction friction in line contacts
72: (2015)
Auxetic tissue engineering scaffolds with nanometric features and resonances in the megahertz range
73: (2015)
Direct Laser Writing of Fractal Surfaces: Strategy to Design and Manufacture Textured Materials
74: (2015)
ENGINEERING EDUCATION. Beyond Technical Skills (II)
75: (2015)
Multi-Channeled Polymeric Microsystem for Studying the Impact of Surface Topography on Cell Adhesion and Motility
76: (2015)
The Role of Computer-Assisted Self-Assessment in Courses with a Large Enrollment
77: (2015)
Toward mass production of microtextured microdevices: linking rapid prototyping with microinjection molding
78: (2016)
Analytical model for predicting friction in line contacts
79: (2016)
Analytical model for predicting friction in line contacts
80: (2016)
Analytical model for predicting friction in line contacts
81: (2016)
Analytical model for predicting friction in line contacts
82: (2016)
'Composite scaffold for osteochandral repair obteined by combination od additive manufacturing, particle leaching and hMSC-CM functionalization'
83: (2016)
Composite scaffolds for osteochondral repair obtained by combination of additive manufacturing, leaching processes and hMSC-CM functionalization
84: (2016)
'Engineering Education for All: Strategies and Challenges'
85: (2016)
Engineering Education for All: Strategies and Challenges
86: (2016)
HACIA UNA EDUCACION EN INGENIERIA PARA TODOS
87: (2016)
'Lithography-based addtivie manufacture of ceramic biodevices with design-controlled surface topographies'.
88: (2016)
Lithography-based ceramic manufacture (LCM) of auxetic structures: present capabilities and challenges
89: (2016)
'Lithography-based ceramic manufacture of auxetic structures: Present capabilities and challenges'
90: (2016)
'micro-vascular shape-memory polymer actuators obteines by laser stereolithography'
91: (2016)
Micro-vascular shape-memory polymer actuators with complex geometries obtained by laser stereolithography
92: (2016)
Special Issue Engineering Education for All
93: (2017)
DESIGN AND BIOMECHANICAL SIMULATION OF CUSTOM DENTAL IMPLANTS
94: (2017)
Design and Performance Assessment of Innovative Eco-Efficient Support Structures for Additive Manufacturing by Photopolymerization
95: (2017)
International Mobility Promotion in Engineering Education: Towards Global Engineers
96: (2017)
Lithography-based additive manufacture of ceramic biodevices with design-controlled surface topographies
97: (2017)
Lotus-on-chip: computer-aided design and 3D direct laser writing of bioinspired surfaces for controlling the wettability of materials and devices
98: (2017)
Monolithic 3D labs- and organs-on-chips obtained by lithography-based ceramic manufacture
99: (2017)
Systematic development methodology for smart based on shape memory polymers
100: (2017)
Systematic Development Strategy for Smart Devices Based on Shape-Memory Polymers
101: (2017)
Towards Global Engineers: Challenges and Strategies for Promoting International Mobility in Engineering Education
102: (2018)
Biomedical Engineering Project Based Learning: Euro-African Design School Focused on Medical Devices
103: (2018)
Guiding Engineering Educators: Keeping Pace with Scientific-Technological Change and Socio-Economic Development
104: (2018)
Manufacturing of Polymeric Substrates with Copper Nanofillers through Laser Stereolithography Technique
105: (2018)
Manufacturing of polymeric substrates with copper nanowires using the laser stereolithography technique'
106: (2018)
Research on the Methods for the Mass Production of Multi-Scale Organs-On-Chips
107: (2018)
Safe innovation: On medical device legislation in Europe and Africa
108: (2018)
The Kahawa Declaration: A manifesto for the democratization of medical technology
109: (2018)
3D Printed Structures Filled with Carbon Fibers and Functionalized with Mesenchymal Stem Cell Conditioned Media as In Vitro Cell Niches for Promoting Chondrogenesis
110: (2019)
Analysis of the adhesion of titanium and carbon-diamond coatings on 3D printed textured surfaces
111: (2019)
Biofabrication strategies for creating microvascular complexity
112: (2019)
biofabrication strategies for creating microvascular complexity
113: (2019)
ENGINEERING HUMAN-SCALE ARTIFICIAL BONE GRAFTS FOR TREATING CRITICAL-SIZE BONE DEFECTS
114: (2019)
ENGINEERING HUMAN-SCALE ARTIFICIAL BONE GRAFTS FOR TREATING CRITICAL-SIZE BONE DEFECTS
115: (2019)
FLIPPED LEARNING IN A MARINE ENGINEERING SCHOOL. A SUCCESS STUDY
116: (2019)
MODELING LIVING CELLS WITHIN MICROFLUID SYSTEMS USING CELLULAR AUTOMATA MODELS
117: (2019)
Modeling Living Cells Within Microfluidic Systems Using Cellular Automata Models
118: (2019)
Shape-memory actuators manufactured by dual extrusion multimaterial 3d printing of conductive and non-conductive filaments
119: (2019)
Towards Open-Source and Collaborative Project-Based Learning in Engineering Education: Situation, Resources and Challenges
120: (2019)
Using Smartphones Physical Interfaces in Engineering Education: Experiences in Promoting Student Motivation and Learning
121: (2019)
Vortex Matter in a Superconducting Square Under 2D Thermal Gradient
26 Capítulos de libros
1: (2008)
Active annuloplasty system for mitral valve insufficiency
2: (2008)
Elastohydrodynamic models for predicting friction in point contacts lubricated with polyalphaolefins
3: (2008)
The Evolution and Development of Mechanical Engineering through large cultural areas
4: (2008)
The Twenty-One Books of devices and machines: an encyclopedia of machines and mechanisms of the 16th Century
5: (2011)
Enhancing product development through CT Images, Computer-aided Design and Rapid manufacturing: Present capabilities, main applications and challenges
6: (2013)
A proposal for structured development methodology of biodevices
7: (2013)
Additive manufacturing technologies for enhancing the development process of biomedical devices
8: (2013)
Biofabrication: Main advances and challenges
9: (2013)
Brief overview of novel technologies with impact in the biomedical industry
10: (2013)
Computer aided design technologies for biomedical devices
11: (2013)
Computer-aided engineering resources and FEM for biomedical devices
12: (2013)
Computer-aided manufacturing of biomedical devices
13: (2013)
Fractal geometry for biomimetic design of biomedical devices
14: (2013)
General considerations for the development of medical devices
15: (2013)
In silico, in vitro and in vivo testing of biodevices
16: (2013)
Introduction to modern product development
17: (2013)
Medical imaging-aided design of biomedical devices
18: (2013)
Methods to promote creativity and technological transfer
19: (2013)
Micromanufacturing technologies for biodevices: Interacting at a cellular scale
20: (2013)
Nanomanufacturing technologies for biodevices: Interacting at a molecular scale
21: (2013)
Porous and lattice geometries for biodevices with advanced properties
22: (2013)
Project based learning in Biomedical Engineering
23: (2013)
Rapid form copying and rapid mold making systems for biodevices
24: (2016)
Project-Based Learning in the Field of Biomedical Microdevices:The CDIO Approach
25: (2016)
Rapid Prototyping of Biomedical Microsystems for Interacting at a Cellular Level
26: (2019)
Open Source Medical Devices
6 Conferencias invitadas en congresos
1: (2008)
Special Session on Active Materials for Medical Devices AMMD 2009
2: (2009)
Importancia de los prototipos avanzados para el análisis del diseño y evolución del producto final
3: (2011)
Las patentes como fuente de inspiración para experiencias de aprendizaje basado en proyectos
4: (2014)
Evolution and implementation of CDIO Iniciatives at ETSII-UPM
5: (2014)
Evolution and implementation of CDIO Iniciatives at ETSII-UPM
6: (2017)
INDUSTRIALES INGENIA Y LA INICIATIVA INTERNACIONAL CDIO
4 Cursos, seminarios y tutoriales
1: (2009)
Aplicación de las nuevas tecnologías en el diseño mecánico
2: (2009)
Aplicación de materiales inteligentes en el desarrollo de dispositivos
3: (2009)
Experto en tecnologías CAD-CAE-CAM
4: (2010)
Técnico Auxiliar en Diseño Industrial
1 Informes para las AAPP o sus organismos dependientes
1: (2009)
Inspección De Mercado Conforme A La Directiva 98/37/Ce De Máquinas Para El Ministerio De Industria, Turismo Y Comercio, Dirección General De Industria, Subdirección General De Calidad Y Seguridad Industrial
9 Libros
1: (2007)
HISTORIA DE LAS MAQUINAS
2: (2007)
MANUALES DE LA ASIGNATURA "VIBRACIONES EN MAQUINAS"
3: (2009)
Diseño y Cálculo de Transmisiones por Engranajes
4: (2012)
Handbook of Active Materials for Medical Devices: Advances and Applications.
5: (2013)
Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices
6: (2014)
'ENGINEERING EDUCATION: BEYOND TECHNICAL SKILLS (I)'
7: (2014)
HANDBOOK OF ADVANCED DESIGN AND MANUFACTURING TECHNOLOGIES FOR BIODEVICES
8: (2016)
'Engineering Education for All: Strategies and Challenges'
9: (2016)
'Handbook of Microsystems for Enhancd Control of Cell Behavior: Fundamentals, Design and Manufacturing Strategies, Applications and Challenges'
2 Otras Publicaciones
1: (2014)
'ENGINEERING EDUCATION: BEYOND TECHINCAL SKILLS'
2: (2019)
OPEN SOURCE AND COLLABORATIVE PROJECT BASED LEARNING IN ENGINEERING EDUCATION
117 Ponencia en Congresos
1: (2007)
ADAPTACION DE LA ASIGNATURA "VIBRACIONES Y RUIDOS EN MAQUINAS" AL ESPACIO EUROPEO DE EDUCACION SUPERIOR
2: (2007)
ADAPTATION OF THE SUBJECT "MACHINERY VIBRATION AND NOISE" TO THE EUROPEAN AREA OF HIGHER EDUCATION
3: (2007)
ALMACENAMIENTO DE ENERGIA POR RESORTES RADIOIDALES DE TORSION A PAR CONSTANTE
4: (2007)
APLICACION DE METODOS DE REINGENIERIA DE PROCESOS PARA LA MEJORA DE LA ENSEÑANZA- APRENDIZAJE EN LA UNIVERSIDAD POLITECNICA DE MADRID
5: (2007)
APRENDIZAJE ACTIVO EN EL DESARROLLO DE PRODUCTOS DE PLÁSTICO
6: (2007)
APRENDIZAJE ACTIVO EN EL DESARROLLO DE PRODUCTOS DE PLÁSTICO
7: (2007)
COMPLETE MACHINE DEVELOPMENT AS MULTIDISCIPLINARY MASTER DEGREE THESIS
8: (2007)
DESARROLLOS COMPLETOS DE MÁQUINAS COMO PROYECTOS FIN DE CARRERA MULTIDISCIPLINARES
9: (2007)
DISPOSITIVOS MEDICOS BASADOS EN EL EMPLEO DE POLIMEROS ELECTROACTIVOS
10: (2007)
ESTUDIO DE LAS CONSECUENCIAS DE IMPACTO DE UN ELEMENTO MECANICO CON LA CABEZA DE UN SER HUMANO
11: (2007)
METODO CUATITATIVO PARA LA EVALUACION DE LA SEGURIDAD EN MAQUINAS EN LA FASE DE DISEÑO
12: (2007)
OPTIMISATION OF THE DESIGN OF A SERIES OF FRICTION TESTS FOR SHOCK-ABSORBER OILS
13: (2007)
POLIMEROS CON MEMORIA DE FORMA EN EL DESARROLLO DE DISPOSITIVOS MÉDICOS
14: (2007)
PROYECTO DEPPLAS: DESARROLLO DE PRODUCTOS DE PLASTICOS
15: (2007)
PROYECTOS DE FIN DE CARRERA MULTIDISCIPLINARES BASADOS EN EL DESARROLLO COMPLETO DE MAQUINAS
16: (2007)
REGIMENES DE LUBRICACION EN CONTACTOS PUNTUALES. COMPARACION DE ACEITES BASE MINERALES Y BASE REGENERADA
17: (2007)
Tecnologías de prototipado rápido como complemento a la docencia del desarrollo de máquinas y productos
18: (2008)
A wearable passive force sensor/active interrogator intended for intra-splint use for the detection and recording of bruxism
19: (2008)
Analysis of the Parameters with influence on Friction in Elastohydrodynamic Lubrication
20: (2008)
Biodevices based on shape-memory polymers: Current capabilities and challenges
21: (2008)
Characterisation and medical applications of magnetorhelogical fluids
22: (2008)
Infrared thermography as support tool for developing shape-memory polymer based biodevices
23: (2008)
Instrumented splint for the diagnosis of bruxism
24: (2008)
Internal Medicine and Mechanical Engineering: Combining disciplines for improving diagnosis and therapeutics
25: (2008)
Modelling and trials of pyroelectric sensors for improving its application for biodevices
26: (2008)
Models for predicting friction in elastohydrodynamic lubrication
27: (2009)
A wearable passive force sensor powered by an active interrogator intended for intra-splint use for the detection and recording of bruxism
28: (2009)
A wearable passive force sensor/active interrogator intended for intra-splint use for the detection and recording of bruxism
29: (2009)
Aplicación de herramientas de e-Learning para la docencia en grandes grupos de alumnos
30: (2009)
Biodevices based on shape-memory polymers: Current capabilities and challenges
31: (2009)
Characterisation and medical applications of magnetorhelogical fluids
32: (2009)
Combining FEM simulations and infrared thermography for optimising the activation system of shape-memory polymer based devices
33: (2009)
Desarrollo y comprobación experimental de una aplicación para resolución del problema elastohidrodinámico en contactos puntuales
34: (2009)
Desarrollo y validación de la teoría general de resortes radioidales a par constante para acumulación de energía
35: (2009)
El nacimiento de una asignatura sobre Desarrollo de Dispositivos Médicos en el marco del E.E.E.S
36: (2009)
Estudio de la estabilidad primaria, influencia en el diseño de vástagos de prótesis femorales personalizadas: Aplicación a paciente específico
37: (2009)
Infrared thermography as support tool for developing shape-memory polymer based biodevices
38: (2009)
Integración mecatrónica de un sistema de acumulación de energía
39: (2009)
La Ingeniería Mecánica durante el Siglo de Oro y su relación con el Renacimiento en Europa
40: (2009)
Modelling and trials of pyroelectric sensors for improving its application for biodevices
41: (2009)
Modelo de los efectos térmicos en la lubricación elastohidrodinámica de contactos puntuales
42: (2009)
New system for mitral valve repair: A different solution. The CardioRing Project
43: (2009)
Nociones de ingeniería térmica y herramientas asociadas para incorporación al mundo laboral
44: (2009)
Optimización de densidad de energía en vigas de material compuesto sometidas a flexión pura
45: (2009)
Rapid prototyping and rapid tooling technologies for developing shape-memory polymer based devices
46: (2009)
Stress-strain simulations for optimising the design of shape-memory polymer based annuloplasty rings
47: (2009)
The beginnings of a subject on the Development of Medical Devices as part of the EHEA Framework
48: (2010)
Comprobación experimental de la optimización en peso de vigas tipo sándwich sometidas a flexión pura
49: (2010)
Desarrollo de un sistema de ensayo de grandes deflexiones para vigas tipo sándwich que trabajan a flexión pura
50: (2010)
Design and rapid prototyping of fractal geometries with application in biomedical Engineering
51: (2010)
Diagnosis of bruxism based on piezoelentric sensor and remote communication
52: (2010)
Intelligent expandable structures based on the improved activation activation of shape memory polymers
53: (2010)
Solving the thermo-elastohydrodynamic lubrication problem and its application to predicting friction coefficient in point contacts
54: (2010)
Toy design experience for improving motivation and results in a final year subject.
55: (2011)
Preparing mechanical engineering students for product design professional practice through PBL: planning and execution of the subject
56: (2012)
Biomimetic computer-aided design and manufacture of complex biological surfaces
57: (2012)
Royal manufactures promoted by spanish crown during 18th and 19th centuries: an approach to european industrialitantion
58: (2012)
The influence of textured surface on the lubrication of artificial prosthesis for joints
59: (2014)
APLICACIONES DE LA IMPRESORA 3D EN MEDICINA
60: (2014)
DESIN AND RAPID PROTOTYPING OF COMPLEX BIOMIMETIC FRACTAL GEOMETRIES FOR TISSUE REPAIR
61: (2014)
DISEÑO Y FABRICACION DE MICROSISTEMAS BIOMIMETICOS PARA MODELADO IN VITRO DE ORGANISMOS VIVOS
62: (2014)
ESTRATEGIAS BEIOMECANICAS Y BIOMIMETICAS EN EL DESARROLLO DE ANDAMIOS PARA INGENIERÍA TISULAR.
63: (2014)
EVOLUTION AND IMPLEMENTATION OF CDIO ACTIVITIES AT ETSII-UPM
64: (2014)
Evolution and Implementation of CDIO Initiatives at ETSII-UPM
65: (2014)
Evolution and Implementation of CDIO Initiatives at ETSII-UPM
66: (2014)
EVOLUTION AND IMPLEMENTATION OF CDIO INITIATIVES AT ETSII-UPM .
67: (2015)
FUNCTIONALLY GRADED TISSUE ENGINEEERING SCAFFOLDS OBTEINED BY LITHOGRAPHY-BASED CERAMIC MANUFACTURE'
68: (2015)
INTEGRATING BIOMEDICAL ENGINEERING DESIGN INTRO ENGINEEERING CURRCULA: BENEFITS AND CHALLENGES OF THE CDIO APPROACH
69: (2015)
MULTI-SCALE DESIGN AND MANUFACTURING STRATEGIES TOWARS BIOMETIC CELL CULTURE PLATFORMS AND TISSUE ENGINEERING SCAFFOLDS
70: (2015)
TEACHING ENGINEERING DESIGN TO A MULTIDISCIPLINARY AUDIENCE AT MASTER'S LEVEL: BENEFICTS AND CHALLENGES OF TNE CDIO APPROACH
71: (2015)
'THE INGENIA INICIATIVE: A MULTICIDCIPLINARY SET OF SUBJET FOR PROMOTING THE CDIO METHODOLOGY.
72: (2015)
The 'Ingenia' Initiative: A multidisciplinary set of subjects for promoting the CDIO methodology in a Master's Degree in Industrial Engineering
73: (2016)
'Biomedical microdevices for interacting at a cellular level'
74: (2016)
CDIO Experiences in Biomedical Engineering: Preparing Spanish Students for the Future of Medicine and Medical Device Technology
75: (2016)
CDIO Experiences in Biomedical Engineering: Preparing Spanish sudents dor the future of medicine and medical device technology'
76: (2016)
Design and additive manufacture of complex geometries for heat transfer management in energy engineering"
77: (2016)
'Design strategies of functionally graded materials: toward reliable and eco-sustainable additive manufacturing'
78: (2016)
'Engineering Design course transformación: From a conceive - design toward a complete CDIO approach'
79: (2016)
'La Iniciativa Industriales INGENIA'
80: (2016)
Modeling photopolymerization processes for enhanced part quality'
81: (2016)
Modeling the mechanical behavior of photo-polimerized epoxy resin during additive amnufacture by laser stereolithography: influence on part quality
82: (2016)
'Multi.scale design and manufacturing for interacting at a cellular level'
83: (2016)
'Surface biofunctionalization of rapid prototyped microsystems for cell culture applications'
84: (2016)
The 'Ingenia' Initiative for Promoting CDIO at TU Madrid: Lessons Learned for Enhaced Performance
85: (2016)
The 'Ingenia' Initiative for promoting CDIO at TU Madrid: Lessons learned for enhanced performance
86: (2016)
The INGENIA initiative for the systematic promotion of CDIO Methodology at TU Madrid: Lessons learned for enhanced performance'
87: (2016)
'Tissue engineering scaffolds designed using pentamode mechanical metamaterials based on Bravais lattices
88: (2017)
Cell scaffolds design using pentamode structures based on Bravais Lattices
89: (2017)
CHARACTERIZATION PHYSICAL AND CHEMICAL PROPERTIES OF EPOXY RESINS FOR ADDITIVE MANUFACTURING BY PHOTOPOLYMERIZATION
90: (2017)
Collaborative poen design for safer biomedical devices
91: (2017)
DESIGN AND BIOMECHANICAL STIMULATION OF DENTAL IMPLANTS
92: (2017)
DISEÑO COLABORATIVO Y ABIERTO DE DISPOSITIVOS MEDICOS
93: (2017)
Industriales INGENIA y la iniciativa Internacional CDIO
94: (2017)
MODELLING OF DE MECHANICAL BEHAVIOR OF THE PHOTOPOLYMERIZATION PROCESS OF RESINS INTENDED FOR ADDITIVE MANUFACTURING (AMT) USING LASER-STEREOLITHOGRAPHY: THE INFLUENCE ON PART QUALITY
95: (2017)
OPEN SOURCE TECHNOLOGY IN BIOMEDICAL ENGINEERING: fAST TRACK TOWARD SUSTEINABLE DEVELOPMENT
96: (2017)
'Ten years of CDIO experiences linked to toy design'
97: (2017)
The UBORA Project: Euro-African Open Biomedical Engineering e-Platform for Innovation through Education
98: (2017)
TRENDS IN THE MULTI-SCALE DESIGN AND MANUFACTURE OF BIOINSPIRED BIODEVICES
99: (2017)
UBORA:Euro-African Biomedical ePlarform for Innovation through Education'
100: (2018)
CDIO Experiencies in Biomedical Engineering: 10 years, 100 biodevices, 1000 students
101: (2018)
Collaborative open-Source Medical Devices:Challenges and Advances
102: (2018)
Combining CDIO and case study methodologies in flipped classroom satrategies.
103: (2018)
Combining CDIO and case study methodologies in flipped classroom teachin strategies: some applications and outcomes in a 'Machinery Design' 'subjet'
104: (2018)
Coordinated design and implementatión of Bioingeneering Design and MedTECH courses by means of CDIO projects linked to medical devices.
105: (2018)
International teaching-learning strategy for the promotion of collaboratively developed open-source medical devices
106: (2018)
The First UBORA Design School of Nairobi: A one-week intensive and international CDIO Conference
107: (2018)
The UBORA DESIGN COMPETITION: AN INTERNATIONAL STUDENTS CHALLENGE FOCUSED ON INNOVATIVE MEDICAL DEVICES DEVELOPED USING THE CDIO METHODOLOGY
108: (2018)
Towards open-Source Medical Devices
109: (2018)
UBORA: A digital infraestructure ofr collaborative research and velopment of open-cource medical devices'
110: (2019)
Desarrollo y validación de un dispositivo pont of care para la detección de infección urinaria y antiobiograma rápido en países en vias de desarrollo
111: (2019)
IMPROVING STUDENTS PROJECT MANAGEMENT SKILLS IN BIOMEDICAL ENGINEERING PROJECTS
112: (2019)
IMPROVING STUDENTS¿ PROJECT MANAGEMENT SKILLS IN BIOMEDICAL ENGINEERING PROJECTS
113: (2019)
Project based Learning and Biomedical Devices: The UBORA Approach towards an International Community of Developers Focused on Open Source Medical Devices
114: (2019)
Project-Based Learning and service learning: towards helpful medical devices
115: (2019)
Project-based learning hybridized with service learning: Involving students in needs-based design of medical devices
116: (2019)
Techniques for Usability Risk Assessment during Medical Device Design
117: (2019)
Techniques for Usability Risk Assessment during Medical Device Design.
Explotación de Resultados y Transferencia de Tecnología
18 Patentes
1: (2007)
MICROSISTEMAS TELEOPERADO POR CAMARAS ACTIVAS PARA ANALISIS QUIMICOS
2: (2007)
SISTEMA DE ANULOPLASTIA ACTIVO PARA EL TRATAMIENTO PROGRESIVO DE PATOLOGÍAS CARDIOVASCULARES
3: (2007)
SISTEMA MECÁNICO AUTÓNOMO PARA APERTURA Y CIERRE DE VENTANAS
4: (2007)
SISTEMA PARA LA DETECCION Y TRATAMIENTO DEL BRUXISMO Y OTRAS PATOLOGIAS OCLUSALES
5: (2008)
Molde modular para obtención de prototipos rápidos
6: (2008)
Sistema de anuloplastia activo para el tratamiento progresivo de patologías cardiovasculares
7: (2008)
Sistema mecánico autónomo para apertura y cierre de ventanas
8: (2008)
Sistema para la detección y el tratamiento del bruxismo y otras patologías oclusales
9: (2008)
Sistema para la detección y tratamiento del bruxismo y otras patologías oclusales
10: (2009)
Molde modular para obtención de prototipos rápidos
11: (2009)
Sistema de telemetría empleando comunicación mediante campo magnético para diagnóstico y detección de episodios bruxistas
12: (2010)
Dispositivo seguro para conducción frente a situaciones de hombre muerto o dormido
13: (2010)
Sistema de telemetría empleando comunicación mediante campo magnético para diagnóstico y detección de episodios bruxistas
14: (2010)
Soporte tridimensional para producción artificial de órganos y otras estructuras del organismo humano y método de obtención del mismo
15: (2010)
Sustrato cuasibidimensional para crecimiento de celúlas y tejidos y método de obtención del mismo.
16: (2012)
Substrato cuasibidimensional para crecimiento de células y tejidos y método de obtención del mismo
17: (2013)
DISPOSITIVO PARA TRAQUEOTOMÍA ASISTIDA
18: (2018)
Accesorio endoscópico
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2022 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
