Descripción
|
|
---|---|
An active antenna based on a printed dipole directly connected to a differential amplifier is presented. The antenna covers the frequency band from 1.7-2.6GHz meaning the relative bandwidth of 41.86%. As the input impedance is mainly defined by the amplifier output, S11 < -10dB was obtained in the whole frequency range. By designing both the active and the passive parts together a low equivalent noise temperature of 169K was obtained. The gain of the active antenna is higher than 15dBi. Antenna prototype was manufactured and measured. A good agreement between simulation and measurement was observed. | |
Internacional
|
Si |
Nombre congreso
|
2012 10th International Symposium on Antennas, Propagation & EM Theory (ISAPE), |
Tipo de participación
|
960 |
Lugar del congreso
|
Xian |
Revisores
|
Si |
ISBN o ISSN
|
978-1-4673-1799-3 |
DOI
|
|
Fecha inicio congreso
|
22/10/2012 |
Fecha fin congreso
|
26/10/2012 |
Desde la página
|
290 |
Hasta la página
|
293 |
Título de las actas
|
2012 10th International Symposium on Antennas, Propagation & EM Theory (ISAPE), |