|
Descripción
|
|
|---|---|
| In this study, the feasibility of incorporating ceramic waste from bricks (perforated brick and double hollow brick) and extruded polystyrene (XPS) waste, is analysed. Results show that it is possible to incorporate up to 25% of ceramic waste and 4% of XPS waste over the weight of gypsum in a gypsum matrix. Furthermore, with the addition of ceramic waste an 8% of surface hardness increase and a 25% of capillary water absorption reduction can be obtained. On the other hand, with the addition of XPS, a 26% reduction of density and a 37% improvement of thermal conductivity can be obtained. The obtained results are favorable to use these materials in order to produce prefabricated gypsum and also as material for interior cladding walls. | |
|
Internacional
|
Si |
|
JCR del ISI
|
No |
|
Título de la revista
|
International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering Vol:9, No:7, 2015 |
|
ISSN
|
1307-6892 |
|
Factor de impacto JCR
|
|
|
Información de impacto
|
|
|
Volumen
|
|
|
DOI
|
|
|
Número de revista
|
|
|
Desde la página
|
713 |
|
Hasta la página
|
716 |
|
Mes
|
SIN MES |
|
Ranking
|
|