Observatorio de I+D+i UPM

Descripción
The influence of the secondary or backup protection for estimating voltage sags severity in power systems is assessed through the combined use of the Monte Carlo technique and the SARFI-curve index, considering the most used compatibility references as: ITIC, IEC 61000-4-11, and SEMI-F47. The generation of the voltage sags registers is developed through a short-circuit simulator which involves five stochastic variables: (i) fault rate, (ii) fault impedance, (iii) fault type, (iv) location, and (v) fault clearing time, evaluated in a virtual long-term monitoring simulation through the Monte Carlo sampling method. The effect of the fault clearing time on voltage sags severity is analyzed and the results of the SARFI-curve index are jointly studied in three power networks, two IEEE test networks (24 and 118 busbars) and the national power network of Ecuador (357 busbars).
Internacional	Si
JCR del ISI	Si
Título de la revista	Dyna Energía y sostenibilidad
ISSN	0012-7361
Factor de impacto JCR	0,179
Información de impacto
Volumen	4
DOI	http://dx.doi.org/10.6036/ES7546
Número de revista	1
Desde la página	1
Hasta la página	14
Mes	ENERO
Ranking

Esta actividad pertenece a memorias de investigación

• Autor: Xavier Zambrano
• Autor: Araceli Hernandez Bayo (UPM)
• Autor: Mohamed Izzeddine Izzeddine (UPM)
• Autor: Rosa Maria de Castro Fernandez (UPM)

• Creador: Departamento: Automática, Ingeniería Eléctrica y Electrónica e Informática Industrial