|
Descripción
|
|
|---|---|
| The design and development of a new method for performing fracture toughness tests under impulsive loadings using explosives is presented. The experimental set-up was complemented with pressure transducers and strain gauges in order to measure, respectively, the blast wave that reached the specimen and the loading history. Fracture toughness tests on a 7017-T73 aluminium alloy were carried out by using this device under impulsive loadings. Previous studies reported that such aluminium alloy had very little strain rate sensitivity, which made it an ideal candidate for comparison at different loading rates. The fracture-initiation toughness values of the 7017-T73 aluminium alloy obtained at impulsive loadings did not exhibit a significant variation from the cases studied at lower loading rates. Therefore, the method and device developed for measuring the dynamic fracture-initiation toughness under impulsive loadings was considered suitable for such a purpose. | |
|
Internacional
|
Si |
|
Nombre congreso
|
28th International Symposium on Ballistics |
|
Tipo de participación
|
960 |
|
Lugar del congreso
|
Atlanta, GA, EE.UU. |
|
Revisores
|
Si |
|
ISBN o ISSN
|
|
|
DOI
|
|
|
Fecha inicio congreso
|
22/09/2014 |
|
Fecha fin congreso
|
26/09/2014 |
|
Desde la página
|
211 |
|
Hasta la página
|
219 |
|
Título de las actas
|
A NOVEL METHOD FOR MEASURING THE DYNAMIC FRACTURE-INITIATION TOUGHNESS UNDER IMPULSIVE LOADINGS |