Abstract
|
|
---|---|
High power (> 0.5 W) single-mode frequency laser at 1.55 ?m are nowadays key components for a large number of applications such as lidar systems, telemetry or free-space communications. For this level of power, the most suitable and available sources are solid-state lasers and fiber lasers. Semiconductor devices, which are more compact and more efficient, have still to demonstrate very high power operation to be a credible competitor. In order to obtain these levels of power with semiconductor devices, the more suitable device seems to be the Master Oscillator Power Amplifier (MOPA). Single-mode emission is generated by a Distributed Feedback laser (DFB) and the signal is then amplified with a Power Amplifier (PA). To avoid complex optical coupling and to simplify the packaging, it is possible to integrate on the same chip the laser and the amplifier. The main challenges are the fabrication of the multi-section device (at least 2 sections: one for the laser and one for the amplifier) and the reduction of the reflections. Indeed the facet and the internal reflections can create multiple cavities behavior and disturb the laser single-mode emission. In this contribution, we report the realization of a 3-section monolithic MOPA on InP. | |
International
|
Si |
Congress
|
CLEO/Europe-EQEC 2015 |
|
960 |
Place
|
Munich, Alemania |
Reviewers
|
Si |
ISBN/ISSN
|
2160-9020 |
|
|
Start Date
|
21/06/2015 |
End Date
|
25/06/2015 |
From page
|
0 |
To page
|
1 |
|
2015 CONFERENCE ON LASERS AND ELECTRO-OPTICS (CLEO) |