Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
INVESTIGADORES
ESTRUCTURAS DE I+D+I
ACTIVIDAD INVESTIGADORA
INNOVACIÓN
Investigador
Sara Lauzurica Santiago
Categoría Investigador
L.D. PRF.CONTR.DOCT.
Cargos actuales
SECRETARIO DE CENTRO DE INVESTIGACIÓN.
Escuela UPM
E.T.S. DE INGENIEROS INDUSTRIALES
Departamento:
FÍSICA APLICADA E INGENIERÍA DE MATERIALES (N)
Centros/Institutos I+D+i
CENTRO LASER
Area Conocimiento
INGENIERIA MECANICA
Grupo de Investigación:
Manufactura Avanzada con Láser
Email (Directorio UPM)
sara.lauzurica
upm.es
Teléfono (Directorio UPM)
910677005
Datos de Memorias relacionados
Proyectos de I+D+i y generación de recursos
41 Proyectos de I+D+i
1: (2007)
CLASICO Claves científicas para el desarrollo de dispositivos fotovoltaicos avanzados de silicio en lamina delgada comerciales
2: (2008)
AYUDA DE INFRAESTRUCTURAS PARA EL LABORATORIO DE ENSAYO Y CARACTERIZACION DE MATERIALES /CENTRO LASER
3: (2008)
DESARROLLO Y CARACTERIZACION DE CELDAS OPTO-FLUIDICAS BASADAS EN ESTRUCTURAS FOTONICAS DE MICROCANAL GENERADAS POR TECNOLOGIA LASER PARA MEDIDA DE VOLUMENES DE LIQUIDOS CON APLICACION POTENCIAL EN INMUNOENSAYOS OPTOFLU
4: (2008)
MICROMANUFACTURING-MICROFORM
5: (2008)
MICROMANUFACTURING-MICROLASELEC
6: (2008)
PARTICIPACIÓN EN MULTIPLICACIÓN DE ESFUERZOS PARA EL DESARROLLO, INNOVACIÓN, OPTIMIZACIÓN Y DISEÑO DE IVNRNADEROS AVANZADOS (MEDIODIA).
7: (2009)
CLAVES CIENTIFICAS PARA EL DESARROLLO DE DISPOSITIVOS FOTOVOLTAICOS AVANZADOS DE SILICIO EN LAMINA DELGADA COMERCIALES
8: (2009)
Desarrollo de procesos de Microfabricación con Láser
9: (2009)
MULTIPLICACIÓN DE ESFUERZOS PARA EL DESARROLLO, INNOVACIÓN, OPTIMIZACIÓN Y DISEÑO DE INVERNADEROS AVANZADOS (MEDIODIA)
10: (2011)
CELDAS BIO-FOTÓNICAS DE INTERROGACIÓN VERTICAL DE BAJO COSTE BASADAS EN SU-8 Y FABRICADAS CON LÁSER PARA BIOENSAYOS SIN MARCADO DE ALTA SENSIBILIDAD
11: (2011)
CORTE DE SUBSTRATOS METÁLICOS PARA APLICACIONES FOTOVOLTAICAS
12: (2011)
DESARROLLO DE PROCESOS PARA FORMACIÓN DE CONTACTOS CON LÁSER PARA MÓDULOS THIN FILM CIGS PARA APLICACIONES FOTOVOLTAICAS
13: (2012)
AVANCES EN MATERIALES EN INTERFACES PARA CÉLULAS DE SILICIO EN LÁMINA DELGADA
14: (2012)
CORTE DE SUBSTRATOS METÁLICOS PARA APLICACIONES FOTOVOLTAICAS
15: (2012)
DESARROLLO DE PROCESOS PARA FORMACIÓN DE CONTACTOS CON LÁSER PARA MÓDULOS THIN FILM CIGS PARA APLICACIONES FOTOVOLTAICAS
16: (2012)
INNDISOL. SUBPROG INNPACTO.
17: (2012)
TECNOLOGÍA FOTOVOLTAICA DE THIN FILM CIGS
18: (2013)
APPOLO
19: (2013)
APPOLO
20: (2013)
APPOLO: Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
21: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
22: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
23: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
24: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
25: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
26: (2013)
APPOLO Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
27: (2013)
Tecnología fotovoltaica de Thin Films CIGS
28: (2013)
Tecnología fotovoltaica de Thin Films CIGS
29: (2013)
Tecnología fotovoltaica de Thin Films CIGS
30: (2013)
Tecnología fotovoltaica de Thin Films CIGS
31: (2016)
CHENOC: Células solares de heterounión de silicio de estructura no convencional
32: (2016)
CHENOC: Células solares de heterounión de silicio de estructura no convencional
33: (2017)
ESTUDIO MEDIANTE LÁSER DE RESPUESTA INMUNE MEDIADA POR LA EXPRESIÓN DE LA MOLÉCULA CD69
34: (2018)
APPOLO
35: (2018)
ESTUDIO DE LA CITOTOXICIDAD INDUCIDA FRENTE A CÉLULAS TUMORALES MEDIANTE TECNOLOGÍA LASER
36: (2018)
ESTUDIO MEDIANTE LÁSER DE RESPUESTA INMUNE MEDIADA POR LA EXPRESIÓN DE LA MOLÉCULA CD69
37: (2018)
EVALUACIÓN DE PROCESOS DE MANUFACTURA AVANZADA CON LÁSER
38: (2019)
BIOPIELTEC-CM: NUEVAS TECNOLOGIAS DE FABRICACION Y OPTIMIZACION DE TEJIDOS: LA PIEL COMO SISTEMA MODELO (GOFB-UPM)
39: (2019)
BIOPIELTEC-CM: NUEVAS TECNOLOGIAS DE FABRICACION Y OPTIMIZACION DE TEJIDOS: LA PIEL COMO SISTEMA MODELO (LASBIO-UPM)
40: (2019)
DESARROLLO DE PROCESOS LIFT SOLIDO PARA TRANSFERENCIA DE LÁMINAS DELGADAS DE CU
41: (2019)
FORMACION EN TECNOLOGIA LASER. INTRODUCCION A LA TECNOLOGIA LASER I. INTRODUCCION A LA TECNOLOGIA LASER II. SEGURIDAD EN EL TRABAJO CON LASER
Formación de Investigadores y Movilidad
2 Estancias y sabáticos recogidos en programas oficiales
1: (2008)
Nuevas tecnologías Fotovoltaicas basadas en silicio amorfo.
2: (2008)
Nuevas tecnologías Fotovoltaicas basadas en silicio amorfo.
2 Tesis Doctorales
1: (2013)
Interconexión monolítica de dispositivos fotovoltaicos basados en a-Si mediante ablación directa con fuentes láser en ultravioleta
2: (2013)
Interconexión monolítica de dispositivos fotovoltaicos basados en a-Si mediante ablación directa con fuentes láser en ultravioleta
Difusión de Resultados de Investigación
38 Artículos en revistas
1: (2007)
Advanced 3D micromachining techniques using UV laser sources.
2: (2007)
New techniques for laser microprocessing of photovoltaic devices based on thin-film a-Si:H
3: (2007)
Ultraviolet Nanosecond Laser-Assisted Micro-Modifications in Lithium Niobate Monitored by Nd 3+ Luminiscence.
4: (2008)
Avances en la fabricación de células y módulos fotovoltaicos de silicio en capa fina mediante láser
5: (2008)
Micromecanizado Láser de Componentes de Gran calidad de Acabado Superficial
6: (2008)
3D Laser Micromachining Applications Development on a Dual ns Laser Based Processing System
7: (2009)
Optical characterization of the heat-affected zone in laser patterning of thin a-Si:H
8: (2009)
Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H
9: (2010)
Assessment of Laser Direct-Scribing of a-Si:H solar cells with UV nanosecond and picosecond sources
10: (2010)
Electrical losses induced by laser scribing during monolithic interconnection of devices based on a Si:H
11: (2010)
Pérdidas eléctricas asociadas a procesos de interconexión con láser en dispositivos de lámina delgada
12: (2010)
Selective ablation with UV lasers of a Si:H thin film solar cells in direct scribing configuration
13: (2011)
Influence of laser scribing in the electrical properties of a Si:H thin film photovoltaic modules
14: (2011)
Micromachining of 2D-3D structures with high intensity laser pulses
15: (2011)
Multiaxis Flexible Cell for Laser Precision Machining Design and Applications
16: (2011)
Selective ablation with UV lasers of a-Si:H thin film solar cells in direct scribing configuration
17: (2011)
Selective ablation with UV lasers of a-Si:H thin film solar cells in direct scribing configuration
18: (2011)
Selective ablation with UV lasers of a-Si:H thin film solar cells in direct scribing configuration
19: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
20: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
21: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
22: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
23: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
24: (2013)
New laser-based approaches to improve the passivation and rear contact quality in high efficiency crystalline silicon solar cells
25: (2014)
New strategies in laser processing of TCOs for light management improvement in thin-film silicon solar cells
26: (2014)
Silicon PV module customization using laser technology for new BIPV applications
27: (2015)
Activation of visible up-conversion luminescence in transparent and conducting ZnO:Er:Yb films by laser annealing
28: (2015)
Analysis by finite element calculations of light scattering in laser- textured AZO films for PV thin-film solar cells
29: (2015)
Analysis by finite element calculations of light scattering in laser-textured AZO films for PV thin-film solar cells
30: (2015)
High volume transfer of high viscosity silver pastes using Laser Direct-Write Processing for metallization of c-Si cells
31: (2016)
Laser based processes for product customization in Building Integrated Photovoltaics (PV)
32: (2017)
CLEO (R)/Europe-EQEC 2017 Light absorption enhancement of crystalline silicon wafers by direct laser texturing for heterojunction solar cells
33: (2017)
Investigation on the structural changes of ZnO:Er:Yb thin film during laser annealing to fabricate a transparent conducting upconverter
34: (2018)
From PV to bio: Surviving the photovoltaic bubble at laser centre UPM
35: (2018)
Laser-Induced Forward Transfer Techniques and Applications
36: (2019)
Fluorescence enhanced BA-LIFT for single cell detection and isolation
37: (2019)
Laser-Induced Forward Transfer of silver-based pastes for metallization of photovoltaic devices
38: (2019)
Thermal Effects in the Ablation of Bovine Cortical Bone with Pulsed Laser Sources
5 Capítulos de libros
1: (2007)
Surface Microstructuring by High Intensity Laser Pulses
2: (2008)
UV Laser Selective Ablation of Photovoltaic Materials for Monolithic Interconnection of Devices Based on a-Si:H
3: (2009)
Comparative study of nanosecond and picosecond laser pattering of thin film for photovoltaic solar modules based on a-Si:H
4: (2009)
Micro-Raman study of the thermal affected zone generated after a laser scribing process in a-Si:H photovoltaic thin films
5: (2018)
Laser-Induced Forward Transfer Techniques and Applications
12 Conferencias invitadas en congresos
1: (2007)
Surface Microstructuring by High Intensity Laser Pulses
2: (2008)
Application of high intensity short pulse lasers to precision micromanufacturing
3: (2010)
2D/3D Micromachining Processes with UV Short Pulse Lasers for Industrial Manufacturing
4: (2012)
Parameterization of local laser doping and laser-fired contacts for high efficiency c-Si solar cells
5: (2013)
New laser-based approaches to improve the passivation and rear contact quality in high effiency crystalline silicon solar cells
6: (2014)
New strategies in laser processing of TCOs for light management improvement in thin-film silicon solar cells
7: (2016)
Laser based Processes for Product Customization in Building Integrated Photovoltaics
8: (2017)
Laser Induced Forward Transfer of High Viscosity Fluids. Application To Solar Cell Metallization and Bio-Printing.
9: (2018)
From PV to bio: Surviving the photovoltaic bubble at laser centre UPM
10: (2018)
LASER DIRECT WRITING OF BIOCOMPATIBLE HYDROGELS USING A BLISTER ASSISTED APPROACH WITH THICK POLYIMIDE LAYERS
11: (2018)
LASER DIRECT WRITING OF BIOCOMPATIBLE HYDROGELS USING A BLISTER ASSISTED APPROACH WITH THICK POLYIMIDE LAYERS
12: (2018)
Laser Induced Forward Transfer, applications and modelling.
46 Ponencia en Congresos
1: (2007)
Confocal microluminescence studies of laser assisted micromodifications in transparent crystals.
2: (2007)
Laser Selective Ablation of thin film structures based on a-Si:H.
3: (2007)
New techniques for laser microprocessing of photovoltaic devices based on thin film a-si:H.
4: (2007)
UV laser microprocessing of photovoltaic devices based on thin film a-Si:H.
5: (2007)
UV Laser Microprocessing of Thin Film Structures Based on a-Si.
6: (2008)
Avances en la fabricación de células y módulos fotovoltaicos de silicio en capa fina mediante láser
7: (2008)
Development of 2D/3D Microstructuring Techniques using ns Pulsed UV Lasers
8: (2008)
DIRECT DEVELOPMENT OF 2D/3D MICROSTRUCTURES WITH UV LASERS IN THE NS REGIME
9: (2008)
Micromecanizado Láser de Componentes de Gran calidad de Acabado Superficial
10: (2008)
New Approach for Laser Monolithic Interconnection of Photovoltaic Devices Based on a-Si:H
11: (2008)
SELECTIVE ABLATION OF PHOTOVOLTAIC MATERIALS WITH UV LASER SOURCES FOR MONOLITHIC INTERCONNECTION OF DEVICES BASED ON a-Si:H
12: (2008)
UV LASER SELECTIVE ABLATION OF PHOTOVOLTAIC MATERIALS FOR MONOLITHIC INTERCONNECTION OF DEVICES BASED ON a-Si:H
13: (2008)
3D Laser micromachining applications development on a dual ns based processing system
14: (2009)
Comparative study of nanosecond and picosecond laser pattering of thin film for photovoltaic solar modules based on a-Si:H
15: (2009)
Micro-Raman study of the thermal affected zone generated after a laser scribing process in a-Si:H photovoltaic thin films
16: (2009)
Optical characterization of the heat-affected zone in laser patterning of thin film a-Si:H
17: (2009)
Optical characterization of the heat-affected zone in laser scribing of thin film photovoltaic modules based on a-Si:H
18: (2010)
Assessment of Laser Direct-Scribing of a-Si:H solar cells with UV nanosecond and picosecond sources
19: (2010)
Electrical losses induced by laser scribing during monolithic interconnection of devices based on a Si:H
20: (2010)
Influence of the back contact thickness in laser patterning for monolithic interconnection of devices based on a-Si:H
21: (2010)
Pérdidas eléctricas asociadas a procesos de interconexión con láser en dispositivos de lámina delgada
22: (2010)
Procesos láser en dispositivos fotovoltaicos de silicio en lámina delgada
23: (2010)
Selective ablation with UV lasers of a Si:H thin film solar cells in direct scribing configuration
24: (2011)
Micromachining of 2D-3D structures with high intensity laser pulses
25: (2011)
Multiaxis Flexible Cell for Laser Precision Machining ? Design and Applications
26: (2013)
UV picosecond laser selective ablation of aluminum films for photovoltaic devices
27: (2014)
LASER INDUCED FORWARD TRANSFER OF SILVER PASTES FOR PRINTING OF FINGERS IN C-SI CELLS.
28: (2014)
Silicon PV module customization using laser technology for new BIPV applications
29: (2015)
Analysis of light scattering by laser-textured AZO films for PV thin-film solar cells
30: (2015)
Descubriendo Conceptos Erroneos en Física de Primer Curso Mediante Cuestionarios Conceptuales
31: (2015)
High volume transfer of high viscosity silver pastes using Laser Direct- Write Processing for metallization of c-Si cells
32: (2016)
Laser based Processes for Product Customization in Building Integrated Photovoltaics
33: (2016)
Laser Induced Forward Transfer for Tissue Engineering at Laser Centre UPM: Filling the Gap between Lab Applications and Industrial Requirements
34: (2017)
Laser functionalization of surfaces
35: (2017)
Assessment of geometry in 2D immune systems using high accuracy laser-based bioprinting techniques
36: (2017)
Assessment of 2D geometries in immune systems responses using LIFT (Laser Induced Forward Transfer) as a high accuracy bioprinting technique.
37: (2017)
Bioimpresión asistida por láser para el estudio de los mecanismos de respuesta del Sistema inmune
38: (2017)
Light absorption enhancement of crystalline silicon wafers by direct laser texturing for heterojunction solar cells
39: (2018)
Assessment of geometry in 2D immune systems using high accuracy laser-based bioprinting techniques
40: (2018)
LIFT bioprinting for the study of the immune response
41: (2018)
LIFT bioprinting for the study of the immune response
42: (2019)
Cement Pastes for printing by Laser Assisted Techniques
43: (2019)
Cement Pastes for printing by Laser Assisted Techniques
44: (2019)
LASER BASED METALLIZATION USING SILVER PASTES
45: (2019)
Laser-Induced Forward Transfer of silver-based pastes for metallization of photovoltaic devices
46: (2019)
3D bioprinting of cements by Laser Induced Forward Transfer (LIFT) for biomedical applications
Explotación de Resultados y Transferencia de Tecnología
1 Creación de empresas
1: (2015)
Innofluence
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2021 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
