Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
INVESTIGADORES
ESTRUCTURAS DE I+D+I
ACTIVIDAD INVESTIGADORA
INNOVACIÓN
Investigador
Alvaro Ramirez Gomez
Categoría Investigador
TITULAR UNIVERSIDAD
Escuela UPM
E.T.S. DE INGENIERÍA Y DISEÑO INDUSTRIAL
Departamento:
INGENIERÍA MECÁNICA, QUÍMICA Y DISEÑO INDUSTRIAL
Centros/Institutos I+D+i
C. TEC. SEGUR. Y CALIDAD ENERG. Y MINAS
Area Conocimiento
EXPRESION GRAFICA EN LA INGENIERIA
Grupo de Investigación:
Edificación, Infraestructura y Proyectos en Ingeniería Rural y Medioambiental (EIPIRMA)
Email (Directorio UPM)
alvaro.ramirez
upm.es
Teléfono (Directorio UPM)
910677637
Datos de Memorias relacionados
Proyectos de I+D+i y generación de recursos
55 Proyectos de I+D+i
1: (2007)
Adaptación del procedimiento de cálculo de silos al nuevo Eurocódigo 1 parte 4
2: (2007)
Automatización del cálculo de silos de acuerdo a la normativa internacional
3: (2007)
Desarrollo de un procedimiento automatizado de cálculo de silos adaptado a las necesidades de la industria
4: (2007)
Modelos Híbridos de Cálculo de Silos Agrícolas. Desarrollo y Comprobación Experimental
5: (2007)
Proyecto hidrológico de pequeñas cuencas no aforadas
6: (2008)
Automatización del cálculo de silos de acuerdo a la normativa internacional
7: (2008)
Cálculo de presiones del hormigón fresco sobre los encofrados en obras de infraestructura rural
8: (2008)
Documento de aplicación del Código Técnico de la Edificación adaptado a las necesidades de los colegiados
9: (2008)
Mejora y conservación de firmes en caminos rurales mediante el empleo de materiales residuales
10: (2008)
MODELO PARTICIPATIVO DE EDUCACION SANITARIA MEDIANTE LA EVALUACION DE DIFERENTES MODELOS DE SANEAMIENTO EN LA MICROCUENCA DE LA MINA JOCOTAN
11: (2008)
Modelos Híbridos de Cálculo de Silos Agrícolas. Desarrollo y Comprobación Experimental
12: (2008)
Proyecto hidrológico de pequeñas cuencas no aforadas
13: (2008)
Realización de una instalación extensométrica y obtención de tensiones en un silo-torre perteneciente a una instalación de secado de grano
14: (2009)
ESTUDIO DEL PANDEO Y DE LAS EXPLOSIONES DE POLVO EN SILOS AGRICOLAS METALICOS. SIMULACION NUMERICA DEL PANDEO Y COMPROBACION EXPERIMENTAL
15: (2009)
LA INFORMACION EN RED RELATIVA A LOS TITULOS DE DOCTOR DE LA UNIVERSIDAD ESPAÑOLA
16: (2009)
PROYECTO HIDROLÓGICO DE PEQUEÑAS CUENCAS NO AFORADAS.
17: (2009)
REALIZACION DE UNA INSTALACIÓN EXTENSOMETRICA Y OBTENCION DE TENSIONE EN UN SILO-TORRE PERTENECIENTE A UNA INSTALACION DE SECADO DE GRANO
18: (2010)
ANÁLISIS ESTRUCTURAL DE TECHOS PARA SILOS Y SUS ELEMENTOS DE DISEÑO.
19: (2010)
ATLANTIS ACTION 2, TRANSATLANTIC BIOSYSTEM ENGINEERING, CURRICULUM AND MOBILITY REFERENCE: 156596-EM-1-2009-1-1E - ERA MUNDUS USAEM.-
20: (2010)
ESTUDIO DEL PANDEO Y DE LAS EXPLOSIONES DE POLVO EN SILOS AGRICOLAS METALICOS. SIMULACION NUMERICA DEL PANDEO Y COMPROBACION EXPERIMENTAL
21: (2010)
PROYECTO HIDROLÓGICO DE PEQUEÑAS CUENCAS NO AFORADAS.
22: (2011)
ANÁLISIS ESTRUCTURAL DE TECHOS PARA SILOS Y SUS ELEMENTOS DE DISEÑO.
23: (2011)
ATLANTIS ACTION 2, TRANSATLANTIC BIOSYSTEM ENGINEERING, CURRICULUM AND MOBILITY REFERENCE: 156596-EM-1-2009-1-1E - ERA MUNDUS USAEM.-
24: (2011)
DISEÑO DE ELEMENTOS ESTRUCTURALES EN SILOS CILÍNDRICOS DE ACERO
25: (2011)
ESTUDIO DEL PANDEO Y DE LAS EXPLOSIONES DE POLVO EN SILOS AGRICOLAS METALICOS. SIMULACION NUMERICA DEL PANDEO Y COMPROBACION EXPERIMENTAL
26: (2011)
EXPERIMENTAL, TEST FOR FLOW OF GRANULAR MATERIALS WITH COMPLEX-SHAPED PARTICLES
27: (2011)
PROYECTO HIDROLÓGICO DE PEQUEÑAS CUENCAS NO AFORADAS.
28: (2012)
ATLANTIS ACTION 2, TRANSATLANTIC BIOSYSTEM ENGINEERING, CURRICULUM AND MOBILITY REFERENCE: 156596-EM-1-2009-1-1E - ERA MUNDUS USAEM.-
29: (2012)
DEVELOPING A PROCEDURE TO CALCULATE CIRCULAR CYLINDIRICAL STEEL SILO TO ACOMPLISH WITH EUROCODE STANDARS
30: (2012)
DISEÑO DE ELEMENTOS ESTRUCTURALES EN SILOS CILÍNDRICOS DE ACERO
31: (2012)
ENSAYO ESTRUCTURAL DE UN TECHO DE SILO METÁLICO DE 18,33 M DE DIÁMETRO
32: (2012)
ESTUDIO DEL PANDEO Y DE LAS EXPLOSIONES DE POLVO EN SILOS AGRICOLAS METALICOS. SIMULACION NUMERICA DEL PANDEO Y COMPROBACION EXPERIMENTAL
33: (2012)
EXPERIMENTAL, TEST FOR FLOW OF GRANULAR MATERIALS WITH COMPLEX-SHAPED PARTICLES
34: (2012)
EXPERIMENTAL TESTS FOR FLOW CHARACTERIZATION OF BIOMASS MATERIALS
35: (2013)
ATLANTIS ACTION 2, TRANSATLANTIC BIOSYSTEM ENGINEERING, CURRICULUM AND MOBILITY REFERENCE: 156596-EM-1-2009-1-1E - ERA MUNDUS USAEM.-
36: (2013)
DESIGN OF CONICAL STEEL ROOFS FOR SILOS TO ACOMPLISH WITH EUROCODE STANDARS
37: (2013)
DEVELOPING A PROCEDURE TO CALCULATE CIRCULAR CYLINDIRICAL STEEL SILO TO ACOMPLISH WITH EUROCODE STANDARS
38: (2013)
DEVELOPING AN AUTOMATIC CALCULATION OF CYLINDRICAL STEEL SILOS IN ACCORDANCE WITH EUROCODE STANDARS
39: (2013)
DISEÑO DE UNA BANDEJA PARA EXPOSITOR DE PRODUCTOS. MODELADO 3D Y REALIZACIÓN DE PROTOTIPO
40: (2013)
ESTUDIO DEL COMPORTAMIENTO DE BIOCOMBUSTIBLES SOLIDOS DE ORIGEN AGROFORESTAL EN SU MANEJO Y ALMACENAMIENTO: CARACTERIZACION MECANICA Y DE LA EXPLOSIVIDAD DEL MATERIAL
41: (2013)
ESTUDIO DEL PANDEO Y DE LAS EXPLOSIONES DE POLVO EN SILOS AGRICOLAS METALICOS. SIMULACION NUMERICA DEL PANDEO Y COMPROBACION EXPERIMENTAL
42: (2013)
ORGANIZACIÓN DEL 14 SIMPOSIO INTERNACIONAL DE LA SOCIEDAD DE TRANSPORTE POR TUBERÍA
43: (2014)
ATLANTIS ACTION 2, TRANSATLANTIC BIOSYSTEM ENGINEERING, CURRICULUM AND MOBILITY REFERENCE: 156596-EM-1-2009-1-1E - ERA MUNDUS USAEM.-
44: (2014)
DESIGN OF CONICAL STEEL ROOFS FOR SILOS TO ACOMPLISH WITH EUROCODE STANDARS
45: (2014)
DEVELOPING AN AUTOMATIC CALCULATION OF CYLINDRICAL STEEL SILOS IN ACCORDANCE WITH EUROCODE STANDARS
46: (2014)
DISEÑO DE UNA BANDEJA PARA EXPOSITOR DE PRODUCTOS. MODELADO 3D Y REALIZACIÓN DE PROTOTIPO
47: (2014)
ENSAYOS DE SIMULACIÓN DE EXPLOSIONES EN ELEMENTOS DE CUBIERTA DE SILOS A ESCALA REAL
48: (2014)
ESTUDIO DEL COMPORTAMIENTO DE BIOCOMBUSTIBLES SOLIDOS DE ORIGEN AGROFORESTAL EN SU MANEJO Y ALMACENAMIENTO: CARACTERIZACION MECANICA Y DE LA EXPLOSIVIDAD DEL MATERIAL
49: (2014)
ESTUDIO DEL PANDEO Y DE LAS EXPLOSIONES DE POLVO EN SILOS AGRICOLAS METALICOS. SIMULACION NUMERICA DEL PANDEO Y COMPROBACION EXPERIMENTAL
50: (2015)
COBISMA-CM: Estudio del comportamiento de biocombustibles sólidos de origen agroforestal en su manejo y alamcenamiento: Caracterización mecánica y de la explosividad del material
51: (2015)
DESIGN AND STRUCTURAL CALCULATION OF CONICAL STEEL ROOFS FOR SILOS TO COMPLISH WITH EUROCODE AND USA STANDARDS
52: (2016)
DESIGN AND STRUCTURAL CALCULATION OF CONICAL STEEL ROOFS FOR SILOS TO COMPLISH WITH EUROCODE AND USA STANDARDS
53: (2017)
INTERNATIONAL FREIGHT PIPELINE SOCIETY. EDUCATION SPONSORSHIP
54: (2018)
DESIGN AND STRUCTURAL CALCULATION OF CONICAL STEEL ROOFS FOR SILOS TO COMPLISH WITH EUROCODE AND USA STANDARDS
55: (2018)
INTERNATIONAL FREIGHT PIPELINE SOCIETY. EDUCATION SPONSORSHIP
Formación de Investigadores y Movilidad
2 Estancias y sabáticos recogidos en programas oficiales
1: (2007)
RESOLUCIÓN DE 12 DE ABRIL DE 2007, DE LA SECRETARÍA DE ESTADO DE UNIVERSIDADES E INVESTIGACIÓN, POR LA QUE SE CONCEDEN AYUDAS COMPLEMENTARIAS PARA ESTANCIAS BREVES EN ESPAÑA Y EN EL EXTRANJERO CORRESPONDIENTES A LOS BENEFICIARIOS DE AYUDAS PREDOCTORALES DE FORMACIÓN PERSONAL INVESTIGADOR.
2: (2009)
EXPLICACIÓN DE FENÓMENOS OBSERVADOS EN TRES SILOS EXPERIMENTALES A ESCALA REAL. SIMULACIONES UTILIZANDO EL MÉTODO DE ELEMENTOS DISCRETOS Y VALIDACIÓN EXPERIMENTAL.
2 Tesis Doctorales
1: (2007)
PRESSURE MEASUREMENTS IN FULL SCALE SILOS WITH ECCENTRIC HOPPERS [MEDICION DE PRESIONES EN SILOS A ESCALA REAL CON TOLVAS EXCENTRICAS]
2: (2016)
Aplicación de una metodología didáctica a estudiantes de ingeniería mecánica para mejorar su empleabilidad e inserción laboral
Difusión de Resultados de Investigación
63 Artículos en revistas
1: (2007)
Cálculo de encofrados de gran altura mediante un modelo de elementos finitos: estudio paramétrico
2: (2009)
Analysis of Measurements Obtained by Plate-type Pressure Cells Having a Recess - DEM Simulation
3: (2009)
Determination of parameters used to prevent ignition of stored materials and to protect against explosions in food industries
4: (2009)
Determination of the mechanical properties of powdered agricultural products and sugar
5: (2009)
Dust explosion venting in silos: A comparison of standards NFPA 68 and EN 14491
6: (2009)
On the steel cost of circular flat-bottomed silos designed using the Eurocodes
7: (2010)
Design of Tall Formworks by a Finite-Element Model
8: (2010)
Design of Tall Formworks by a Finite-Element Model
9: (2010)
Experimental determination of self-heating and self-ignition risks associated with the dusts of agricultural materials commonly stored in silos
10: (2010)
On the use of plate-type normal pressure cells in silos Part 1: Calibration and evaluation
11: (2010)
On the use of plate-type normal pressure cells in silos Part 2: Validation for pressure measurements
12: (2010)
Pressure measurements in steel silos with eccentric hoppers
13: (2011)
A simplified analytical procedure for assessing the worst patch load location on circular steel silos with corrugated walls
14: (2011)
A simplified model to assess landscape quality from rural roads in Spain
15: (2011)
Computer simulation of complex-shaped formworks using three-dimensional numerical models
16: (2011)
Validation and experimental calibration of 3D discrete element models for the simulation of the discharge flow in silos
17: (2012)
Determination of the risk of self-ignition of coals and biomass materials
18: (2012)
Determination of the risk of self-ignition of coals and biomass materials
19: (2012)
Numerical effects derived from en masse filling of agricultural silos in DEM simulations
20: (2012)
Three dimensional discrete element models for simulating the filling and emptying of silos: analysis of numerical results
21: (2012)
Web-based education in Spanish Universities. A Comparison of Open Source E-Learning Platforms
22: (2013)
Experimental and numerical determination of mechanical properties of polygonal wood particles and their flow analysis in silos
23: (2014)
Discrete element analysis for the assessment of the accuracy of load cell-based dynamic weighing systems in grape harvesters under different ground conditions
24: (2014)
Energetic performance of landfill and digester biogas in a domestic cooker
25: (2014)
Full-scale tests to measure stresses and vertical displacements in an 18.34 m-diameter agricultural steel silo roof
26: (2014)
Full-scale tests to measure stresses and vertical displacements in an 18.34 m-diameter agricultural steel silo roof
27: (2014)
Simulation of counterflow pedestrian dynamics using spheropolygons
28: (2014)
The penetration of respiratory protective devices by respirable solid particles
29: (2014)
Values for particle-scale properties of biomass briquettes made from agroforestry residues
30: (2015)
A Discrete Spheropolygon Model for Calculation of Stress in Crowd Dynamics
31: (2015)
Assessment on bulk solids best practice techniques for flow characterization and storage/handling equipment design for biomass materials of different classes
32: (2015)
Determination of spontaneous combustion of thermally dried sewage sludge
33: (2015)
Determination of spontaneous combustion of thermally dried sewage sludge
34: (2015)
Discrete Element Analysis on the Discharge Rate of Elongated Particles
35: (2015)
Maize grain shape approaches for DEM modelling
36: (2015)
REVIEW OF EQUIPMENT FOR MINE WASTE: FROM THE CONVENTIONAL THICKENER TO THE DEEP CONE FOR PASTE PRODUCTION
37: (2015)
Revisión de los equipos de decantación para estériles de mina: del espesador convencional al de cono profundo para producción de pasta
38: (2015)
Semi-Analytical Model for Non-Spherical Particles
39: (2016)
Activated carbon from flash pyrolysis of eucalyptus residue
40: (2016)
Determining the shape of agricultural materials using spherical harmonics
41: (2016)
Dust explosions in an experimental test silo: Influence of length/diameter ratio on vent area sizes
42: (2016)
Influence of the composition of solid biomass in the flammability and susceptibility to spontaneous combustion
43: (2016)
International Conference for Conveying and Handling of Particulate Solids (CHoPS2015) PREFACE
44: (2016)
Low-resolution spherical harmonics models in application to quasi-quadric particle shapes.
45: (2016)
Research needs on biomass characterization to prevent handling problems and hazards in industry
46: (2017)
A Multicriteria GIS-Based Assessment to Optimize Biomass Facility Sites with Parallel Environment-A Case Study in Spain
47: (2017)
A web-based scaffolding-learning tool for design students' sustainable spatial planning
48: (2017)
Identifying priority areas for rural housing development using the participatory multi-criteria and contingent valuation methods in Alange reservoir area, Central Extremadura (Spain)
49: (2017)
Plausibility in the eco-design and eco-innovation of rural-housing: Reason and confidence in a methodological approach for the sustainable development of reservoir environment under tourism
50: (2017)
Renewable energy management to identify suitable biomass facility location with GIS-based assessment for sustainable environment. Energy Procedia
51: (2017)
SCAFFOLDING AND INTERVENTION OF WEB EDUCATION MODEL TO ASSIST SUSTAINABLE SPATIAL PLANNING FOR DESIGN STUDENTS AS INTERACTIVE AND COLLABORATIVE METHOD
52: (2018)
Analysis and Optimization of Material Flow inside the System of Rotary Coolers and Intake Pipeline via Discrete Element Method Modelling
53: (2018)
Development of a web graphic model with fuzzy-decision-making Trial and Evaluation Laboratory/Multi-criteria-Spatial Decision Support System (F-DEMATEL/MC-SDSS) for sustainable planning and construction of rural housings
54: (2018)
Effects of different snow load arrangements on steel silo roof structures
55: (2018)
Experimental determination of particle-particle restitution coefficient via double pendulum method
56: (2018)
Internal Friction Angle of Metal Powders
57: (2018)
Optimizing the location of a biomass plant with a fuzzy-DEcision-MAking Trial and Evaluation Laboratory (F-DEMATEL) and multi-criteria spatial decision assessment for renewable energy management and long-term sustainability
58: (2018)
Semi-analytical models of non-spherical particle shapes using optimised spherical harmonics
59: (2018)
5th International Symposium on Reliable Flow of Particulate Solids (RELPOWFLO V)
60: (2019)
Análisis de supervivencia a la detección y corrección de la contaminación en series con valores por debajo del límite de detección
61: (2019)
Particle technology as a uniform discipline? Towards a holistic approach to particles, their creation, characterisation, handling and processing!
62: (2019)
Preface to RELPOWFLO V-based articles
63: (2019)
USE OF AUGMENTED REALITY IN THE STUDIES OF INDUSTRIAL DESIGN ENGINEERING
1 Capítulos de libros
1: (2012)
Methods and Practices of Pressure Measurements in Silos
7 Cursos, seminarios y tutoriales
1: (2007)
Curso de Formación especializada en los documentos básicos del Código Técnico de la Edificación.
2: (2007)
Curso sobre Determinación de acciones en la edificación
3: (2007)
Pressure Measurements in Full-Scale Steel Silos
4: (2007)
XII Master Internacional de Riego y Drenaje
5: (2008)
Evaluation of the Landscape around rural roads
6: (2009)
Mechanics of Particulate Solids stored in Silos
7: (2018)
Hazards. Fires and Explosions
80 Ponencia en Congresos
1: (2007)
Cálculo de encofrados por el método de los elementos finitos
2: (2007)
Estimación de la evolución de temperaturas medias para detectar cambios en el clima español.
3: (2007)
Granular Effects arising from mounted Pressure Cells in Silo Walls. DEM Analyses
4: (2007)
Influence of Local Imperfections in Silo Pressure Measurements. DEM Analysis
5: (2007)
Influencia de la excentricidad de la tolva de los silos en la distribución de presiones
6: (2008)
Aplicación del método de los elementos finitos al cálculo de encofrados.
7: (2008)
Design of formworks with two-dimensional and three-dimensional finite element models
8: (2008)
Influence of the hopper eccentricity of silos in pressure distributions
9: (2008)
Influence of the stored material and the geometry on circular steel silo design
10: (2008)
Landscape assessment according to the level of studies of the observer
11: (2008)
The use of waste materials in rural road construction and maintenance
12: (2008)
Utilización de residuos de demolición y construcción en la ejecución y reparación de caminos rurales
13: (2009)
A Methodology to Assess Landscapes from Rural Roads
14: (2009)
Computational methods for the design of formworks used in rural works
15: (2009)
Imperfecciones locales en silos. Análisis mediante el método de los elementos discretos
16: (2009)
Influence of patch-load on metal silos with corrugated walls
17: (2009)
The Effect of Patch-Load on Stress Components of Corrugated Silo Walls
18: (2009)
The evolution of the technical project as the final work in the Spanish Agricultural Engineering studies
19: (2009)
Utilización de escorias de incineradoras en ejecución y reparación de caminos rurales.
20: (2010)
Discrete Element modeling of a 3D scale Silo with Hopper
21: (2010)
Discrete element's capability of predicting material behaviour in a 3-D scale silo with a hopper at its base
22: (2010)
Postgraduate studies in Biosystems Engineering to acquire a doctor degree in Spain
23: (2011)
Análisis del desplazamiento de la carga en vendimiadoras mediante el método de los elementos discretos.
24: (2011)
Analysis of the information about Doctoral Degrees presented in the Spanish universities websites.
25: (2011)
Determinación del coeficiente de rozamiento grano-pared en silos de pared corrugada mediante el método de los elementos discretos (Determination of the particle-wall friction coefficient in corrugated wall silos using a discrete element model)
26: (2011)
Diseño de silo experimental para el estudio de sistemas de protección frente a las explosiones de polvo.
27: (2011)
Experimental validation of a 3D discrete element model for silos
28: (2011)
Pressure and flow pattern predictions in a 3D silo model - DE analysis
29: (2011)
Use of Virtual Learning Environments (VLE) in Spanish Universities: Current State and Comparison of e-Learning Tools
30: (2012)
A study on the discharge rate of pellets stored in silos: discrete element analysis
31: (2012)
Analysis of the numerical results obtained in a 3D discrete element model for simulating the filling and emptying of a small silo.
32: (2012)
Application of protection means against explosions in underground mines.
33: (2012)
Application of standards NFPA 68 and EN 14491 to silos for dust explosion protection
34: (2012)
Assessment of self-combustion risks for solid fuels (POSTER)
35: (2012)
Can bulk solids best practice techniques for flow characterization and handling equipment design be used reliably for biomass materials?
36: (2012)
Design of an experimental silo for dust explosions.
37: (2012)
Design of an experimental silo for dust explosions.
38: (2012)
Determination of ignitiability and explosibility parameters of several materials used in food industries
39: (2012)
Determination of particle-to-particle friction of agricultural materials stored in silos
40: (2012)
Determination of the mechanical properties of biomass pellets for use in DEM simulations
41: (2012)
Effect of inserts on the flow rate. Discrete element simulation and experimental validation
42: (2012)
Introduction to Biosystems Engineering in the Era of the Bio-based Economy: Teaching Resources Development
43: (2012)
Load displacement in grape harvester s: Discrete Element Analysis.
44: (2012)
Mechanical properties of biomass pellets for use in DEM simulations.
45: (2012)
Numerical effects on DEM-predicted silo wall pressures derived from the use of different filling procedures.
46: (2012)
On the determination of the risk of self-ignition of biomass materials.
47: (2012)
On the determination of the risk of self-ignition of biomass materials.
48: (2012)
On the flow of biomass complex-shaped particles
49: (2012)
On the penetration of particles through filters and masks.
50: (2012)
R&D on Structural Design of Steel Silo Roofs for High Snow Load Conditions
51: (2012)
Test silo for dust explosions
52: (2012)
3D discrete element analysis of the discharge rate of pellets stored in silos
53: (2013)
A comparative analysis of ABE Bachelor of Science programs in European and US Universities
54: (2013)
An assessment on flow characterization and storage/handling issues for biomass particulate solids
55: (2013)
Análisis de la permeabilidad al aire de filtros de protección respiratoria
56: (2013)
Discharge rate of elongated particles stored in silos and hoppers: discrete element analysis
57: (2013)
Discrete Element analysis of the discharge of biomass briquettes stored in bins
58: (2013)
Ensayo para calcular tensiones y deformaciones en la estructura del techo de un silo metálico de 18, 34 m de diámetro
59: (2014)
Application of social networks in higher education
60: (2014)
Characterization of gas emissions during heating of solid products
61: (2014)
Characterization of spontaneous combustuion tendency of dried sewage sludge
62: (2014)
Computer-based tools for the assessment of learning processes in higher education: a comparative analysis
63: (2014)
Discrete element analysis on the discharge rate of elongated particles
64: (2014)
Dust Explosions in a Modular Test Silo
65: (2014)
Experimental determination of particle-to-particle friction
66: (2014)
Pressure distributions in tall formworks.
67: (2014)
Semi-Analytical Model for Non-Spherical Particles
68: (2014)
Test recommendations for validation of numerical models in the design of agricultural steel silo roofs
69: (2014)
Vented dust explosions in a modular test silo.
70: (2015)
Divulgative technical videos by university students as a process for the acquisition of cross-curricular skills in the context of EHEA degrees
71: (2015)
Flammability properties of co-firing fuel mixtures
72: (2015)
Influence of obstacles in venting of dust explosions.
73: (2015)
Relación entre las diferentes presiones medidas en distintas partes de un silo de 18,5 m3 en ensayos de explosiones de almidón de maíz
74: (2015)
Research needs on biomass characterization to prevent handling problems and hazards in industry
75: (2017)
La modelización con elementos discretos para el estudio mecánico de sólidos en problemas de ingeniería rural
76: (2017)
La protección frente a explosiones de polvo en silos agrícolas
77: (2018)
BIM as a tool to develop collaborative capacities in Master's students
78: (2018)
Influence of Intertization on the Determination of the Minimum Ignition Energy of Combustible Dusts
79: (2018)
Pressure measurements in an 18.5 m3 silo for dust explosions
80: (2019)
Dust Explosion Venting in Silos
Explotación de Resultados y Transferencia de Tecnología
3 Patentes
1: (2014)
Dispositivo de fijación, cierre y acoplamiento para catéter de perfusión intravenosa
2: (2016)
Dispositivo de fijación, cierre y acoplamiento para catéter de perfusión intravenosa
3: (2019)
MASCARILLA RESPIRATORIA MODULAR
1 Registros de Software
1: (2010)
Cálculo de silos metálicos cilíndricos de chapa delgada corrugada (SILOMECI)
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2023 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
