Observatorio de I+D+i UPM

Memorias de investigación
Artículos en revistas:
Steel profiles for repairing deteriorated timber beam ends
Año:2011
Áreas de investigación
  • Ingenierías
Datos
Descripción
This paper describes the design of a procedure for the upgrading of timber floor joists with decayed ends using steel profiles connected to timber from the upper side of the flooring. The reinforcement consists on a steel S275 U cold formed shape with a plate inserted into timber and connected by means of screwing into the wood. For the experimental verification 30 beams were tested in bending obtaining the stiffness and load carrying capacity. The specimens were divided into three groups. The first was composed by 10 pieces of glued laminated timber of Spruce with 180 x 200 mm cross section; the second one was composed by 10 pieces of sawn timber of Scots pine with the same cross section; and the third one was constituted by 10 solid timber beams of genus Pine with 130 x 150 mm cross section, from a 120 years old building in Madrid. Each group of 10 pieces was divided in two groups of 5 beams. The first sub-group was constituted by the beams with the whole length as a reference group. The pieces of the second one had a shorter length that was substituted by the steel extension. It can be concluded that the steel profile reinforcement can solve the problems derivates from the unsafe support caused by wooden decay affecting a certain and limited length (approximately from 10 to 20% of the length).
Internacional
Si
JCR del ISI
Si
Título de la revista
Informes de la Construccion Revista de Informacion Tecnica
ISSN
0020-0883
Factor de impacto JCR
0,26
Información de impacto
Volumen
63
DOI
10.3989/ic.10.004
Número de revista
521
Desde la página
37
Hasta la página
45
Mes
SIN MES
Ranking
Construction & Building Technology: 47 de 56
Esta actividad pertenece a memorias de investigación
Participantes
  • Autor: Carlos Gonzalez Bravo (UPM)
  • Autor: Francisco Arriaga Martitegui (UPM)
  • Autor: Guillermo Iñiguez Gonzalez (UPM)
  • Autor: Luis Maldonado Ramos (UPM)
Grupos de investigación, Departamentos, Centros e Institutos de I+D+i relacionados
  • Creador: Grupo de Investigación: Construcción con Madera
  • Departamento: Construcción y Tecnología Arquitectónicas
S2i 2021 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNCIDE 2011 (OTR-2011-0236)
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)