Observatorio de I+D+i UPM

Descripción
The bonding quality of epoxy glued timber and glass fibre reinforced polymers (GFRP) was evaluated by means of compression loading shear test. Three timber species (Radiata pine, Laricio pine and Oak) and two kinds of GFRP (plates and rods made with polyester resin reinforced with mat and roving glass fibre) were glued and tested using three epoxy formulations. The increase in shear strength with age after the setting of epoxy formulations and the effect of surface roughness on timber and GRP gluing (the planing of the surface of timber and the previous sanding of GRP) were studied. It can be concluded that the mechanical properties of these products make them suitable for use in the reinforcement of deteriorated timber structures, and that a rough timber surface is preferable to a planed one, while the previous sanding of GRP surfaces is not advantageous.
Internacional	Si
JCR del ISI	Si
Título de la revista	Wood Research
ISSN	1336-4561
Factor de impacto JCR	0,216
Información de impacto
Volumen	56
DOI
Número de revista
Desde la página	297
Hasta la página	310
Mes	SIN MES
Ranking	Materials Science Paper and Wood: 17 de 21

Esta actividad pertenece a memorias de investigación

• Autor: Francisco Arriaga Martitegui (UPM)
• Autor: Guillermo Iñiguez Gonzalez (UPM)
• Autor: Miguel Esteban Herrero (UPM)

• Creador: Grupo de Investigación: Construcción con Madera
• Departamento: Construcción y Vías Rurales