Memorias de investigación
Ponencias en congresos:
Microchannels devices fabricated on soda-lima by laser technologies
Año:2017
Áreas de investigación
  • Mecánica de fluidos,
  • Ingenieria mecanica,
  • Dispositivos laser
Datos
Descripción
In this work, the fabrication of microchannels by direct laser-writing over soda-lime glass with lasers in the nano, pico and femtosecond regimes is presented. Microchannels are the basic structure of the majority of the microfluidic devices. For the manufacturing of these chips, several materials are employed but soda-lime glass outstands among others due to its robustness and chemical resistance [1]. When using soda-lime glass, laser direct-writing is a suitable fabrication technique due to the accuracy and versatility that laser presents [2]. Physical phenomena involved in the ablation of glass in the IR range process depend on the laser pulse duration and, consequently, the morphology of the obtained structures in each case is different. For the fabrication of the channels, three different lasers were employed: a Rofin Nd:YVO4 Q-switched laser with fundamental wavelength of 1064 nm and 20 ns pulse duration, a Lumera Super Rapid-HE (Nd:YVO4) with pulse duration of 12 ps and 1064 nm wavelength and in the femtosecond regime, an amplified Ti:Sapphire laser system (Spectra Physics, Spitfire) with a pulse duration of 100 fs and 800 nm. Microchannels with similar dimensions were achieved in the three cases, with diameter around 20 ?m and depth of 10 ?m. The morphological properties of the ablation channels fabricated by the three approaches were analyzed in detail with SEM and 3D confocal microscopy.
Internacional
Si
Nombre congreso
USTS 2017 - Ultrafast Science & Technology Spain 2017
Tipo de participación
970
Lugar del congreso
Salamanca
Revisores
Si
ISBN o ISSN
CDP08UPM
DOI
Fecha inicio congreso
22/11/2017
Fecha fin congreso
24/11/2017
Desde la página
42
Hasta la página
42
Título de las actas
Book of Abstracts - Ultrafast Science & Technology Spain 2017 https://www.ultrafast.es/USTS2017_Home
Esta actividad pertenece a memorias de investigación
Participantes
  • Autor: M. Aymerich Universidade de Santiago de Compostela
  • Autor: D. Canteli UPM
  • Autor: Carlos Luis Molpeceres Alvarez UPM
  • Autor: J.R. Vázquez de Aldana Universidad de Salamanca
  • Autor: M.T. Flores- Arias Universidade de Santiago de Compostela
Grupos de investigación, Departamentos, Centros e Institutos de I+D+i relacionados
  • Creador: Grupo de Investigación: Manufactura Avanzada con Láser
  • Departamento: Física Aplicada e Ingeniería de Materiales
  • Centro o Instituto I+D+i: Centro Laser