Observatorio de I+D+i UPM
• ESPAÑOL
• ENGLISH
INVESTIGADORES
ESTRUCTURAS DE I+D+I
ACTIVIDAD INVESTIGADORA
INNOVACIÓN
Investigador
Jose Luis Ocaña Moreno
Categoría Investigador
CATEDRATICO UNIVERSIDAD
Escuela UPM
E.T.S. DE INGENIEROS INDUSTRIALES
Departamento:
FÍSICA APLICADA E INGENIERÍA DE MATERIALES
Centros/Institutos I+D+i
CENTRO LASER
Area Conocimiento
INGENIERIA MECANICA
Grupo de Investigación:
Grupo de Investigación en Ingeniería y Aplicaciones del Láser
Email (Directorio UPM)
joseluis.ocana
upm.es
Teléfono (Directorio UPM)
910677010
Datos de Memorias relacionados
Proyectos de I+D+i y generación de recursos
144 Proyectos de I+D+i
1: (2007)
Acción Complementaria PHODYE
2: (2007)
ALELLA. Alternativas electroquímicas, laser, CVD Y EPO para la generación y mejora de recubrimientos sustitutivos de los de metales pesados.
3: (2007)
Desarrollo e instrumentación de un sistema de medición remota para la vigilancia y control de gases contaminantes en entornos urbanos.
4: (2007)
EULASNET II European Laser Technology and Applications Network
5: (2007)
HICARLAW. Desarrollo e instrumentación industrial de procesos de soldadura láser remota a elevada velocidad de componentes de automoción.
6: (2007)
LASMFORM Micro-Conformado; Conformado de piezas en la Microescala: Caracterización, Modelización y Desarrollo de la Tecnología
7: (2007)
MARCADO MASAS PATRÓN
8: (2007)
MICROMANUFACTURING. Desarrollo de Tecnologías de Microfabricación innovadoras para la generación de nuevos negocios e incremento de la competitividad de la industria española en mercados incipientes.
9: (2007)
MICROMAS. Sistemas de Micromecanizado Láser y Ensamble de Alta Cadencia.
10: (2007)
MICROSIL08. Diseño e industrialización de módulos fotovoltaicos en silicio de capa fina.
11: (2007)
Multiplicación de esfuerzos para el desarrollo, innovación, optimización y diseño de invernaderos avanzados (Mediodía).
12: (2007)
PHODYE. New photonic systems on a chip based on dyes for sensor applications scalable at wafer fabrication.
13: (2007)
Programa de Infraestructura y Calidad de la Red de Laboratorios. Centro Láser UPM.
14: (2007)
SHOCKLAS-3. Desarrollo, instrumentación y caracterización experimental de aplicaciones de la tecnología de tratamiento superficial de materiales metálicos por ondas de choque generadas por láser.
15: (2007)
SURFLAS. Desarrollo e instrumentación industrial de técnicas avanzadas ambientalmente sostenibles de tratamiento superficial de materiales metálicos con láser como método de mejora de sus propiedades mecánicas y comportamiento en servicio.
16: (2008)
ALTERNATIVAS ELECTROQUIMICAS, LASER, CVD, Y EOP PARA LA GENERACION Y MEJORA DE RECUBRIMIENTOS SUSTITUTIVOS DEL CROMO DURO. ALELLA
17: (2008)
ANALISIS INTEGRADO TEORICO EXPERIMENTAL DE PROCESOS DE TATAMIENTO DE CHOQUE POR LASER DE COMPONENTES METALICOS
18: (2008)
AYUDA DE INFRAESTRUCTURAS PARA EL LABORATORIO DE ENSAYO Y CARACTERIZACION DE MATERIALES /CENTRO LASER
19: (2008)
COORDINACION ESPAÑOLA DEL PROYECTO EULASNET II (PARAGUAS EUREKA EU 3765) Y ACTUACIONES ASOCIADAS
20: (2008)
EUREKA HICARLAW E 3209. DESARROLLO E INSTRUMENTACION INDUSTRIAL DE PROCESOS DE SOLDADURA LASER REMOTA A ELEVADA VELOCIDAD DE COMPONENTES DE AUTOMOCION
21: (2008)
LEONARDO DA VINCI CONTRACT LASTED.NET
22: (2008)
MICROMANUFACTURING-MICROFORM
23: (2008)
MICROMANUFACTURING-MICROLASELEC
24: (2008)
MICROMANUFACTURING-MICROLASELEC. Cont.
25: (2008)
PARTICIPACIÓN EN MULTIPLICACIÓN DE ESFUERZOS PARA EL DESARROLLO, INNOVACIÓN, OPTIMIZACIÓN Y DISEÑO DE IVNRNADEROS AVANZADOS (MEDIODIA).
26: (2008)
PHODYE - NEW PHOTONIC SYSTEMS ON A CHIP BASED ON DYES FOR SENSOR APPLICATIONS SCALABLE AT WAFER FABRICATION.
27: (2008)
SIMULACIÓN Y CONTROL DE PROCESOS DE TRATAMIENTO SUPERFICIAL POR LÁSER SURFLAS-SC
28: (2009)
ACCIÓN COMPLEMENTARIA DEL PROYECTO EUROPEO PHODYE
29: (2009)
ALTERNATIVAS ELECTROQUÍMICAS, LÁSER, CVD Y EOP PARA LA GENERACIÓN Y MEJORA DE RECUBRIMIENTOS SUSTITUTIVOS DE LOS DE METALES PESADOS. (ALELLA )
30: (2009)
Análisis integrado teórico-experimental de procesos de tratamiento de choque por láser de componentes metálicos
31: (2009)
ANÁLISIS INTEGRADO TEÓRICO-EXPERIMENTAL DE PROCESOS DE TRATAMIENTO DE CHOQUE POR LÁSER DE COMPONENTES METÁLICOS (SHOCKLAS+)
32: (2009)
AYUDA A MASTERES OFICIALES 2008/09 MASTER UNIVERSITARIO EN TECNOLOGIA LASER
33: (2009)
AYUDAS PARA LA CONTRATACION DE PERSONAL TECNICO DE APOYO DE JUAN ANTONIO PORRO GONZALEZ
34: (2009)
CANON COSTES INDIRECTOS AYUDA COMPLEMENTARIA
35: (2009)
CONTRACT N. 033793 - PHODYE - NEW PHOTONIC SYSTEMS ON A CHIP BASED ON DYES FOR SENSOR APPLICATIONS SCALABLE AT WAFER FABRICATION.
36: (2009)
COORDINACIÓN ESPAÑOLA DEL PROYECTO EULASNET II Y ACTUACIONES ASOCIADAS (PARAGUAS EUREKA EU 3765)
37: (2009)
Desarrollo de procesos de Microfabricación con Láser
38: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
39: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
40: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
41: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
42: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
43: (2009)
DISEÑO E INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSILI08) PSE-120000-2008-1
44: (2009)
GRUPO DE INVESTIGACION: INGENIERIA Y APLICACIONES DEL LASER
45: (2009)
LA EXCELENCIA ESPAÑOLA EN RAPID MANUFACTURING. DESARROLLO Y APLICACIÓN DE LA TECNOLOGÍA DE DEFORMACIÓN INCREMENTAL DE SEGUNDA GENERACIÓN PARA APLICACIONES
46: (2009)
LASER TECHNOLOGY EDUCATIONAL NETWORK (LASTED.NET) LEONARDO DA VINCI CONTRACT 2001 VIR004
47: (2009)
MICRO-CONFORMADO; CONFORMADO DE PIEZAS EN LA MICROESCALA: CARACTERIZACIÓN, MODELIZACIÓN Y DESARROLLO DE LA TECNOLOGÍA (LASMFORM)
48: (2009)
MICROMANUFACTURING PSE-020400-2006-1
49: (2009)
MICROMANUFACTURING DESARROLLO DE TECNOLOGIAS DE MICROFABRIC. INNOVADORAS PARA LA GENERACION.... PSE-020400-2007-2
50: (2009)
MICROMANUFACTURING; DESARROLLO DE TECNOLOGIAS DE MICROFABRICAION INNOVADORAS PARA LA GENERACION DE NUEVOS NEGOCIOS Y EL INCREMENTO PSE-020400-2007-2
51: (2009)
MICROMANUFACTURING,PSE-420000-2008-2
52: (2009)
MICROMANUFACTURING,PSE-420000-2008-2
53: (2009)
MULTIPLICACIÓN DE ESFUERZOS PARA EL DESARROLLO, INNOVACIÓN, OPTIMIZACIÓN Y DISEÑO DE INVERNADEROS AVANZADOS (MEDIODIA)
54: (2009)
REPAIR SCRIBE MARK DAMAGES BY LASER SHOCK PEENING
55: (2009)
TALLER DE PRECISION Y CENTRO ELECTROTECNICO DE ARTILLERIA
56: (2010)
ANALISIS INTEGRADO TEORICO EXPERIMENTAL DE PROCESOS DE TATAMIENTO DE CHOQUE POR LASER DE COMPONENTES METALICOS
57: (2010)
CONTRACT N. 033793 - PHODYE - NEW PHOTONIC SYSTEMS ON A CHIP BASED ON DYES FOR SENSOR APPLICATIONS SCALABLE AT WAFER FABRICATION.
58: (2010)
JORNADAS DE TECNOLOGÍAS DE MICROFABRICACIÓN
59: (2010)
LA EXCELENCIA ESPAÑOLA EN RAPID MANUFACTURING. DESARROLLO Y APLICACION DE LA TECNOLOGIA DE DEFORMACION INCREMENTAL DE SEGUNDA GENERACION PARA APLICACIONES ESTRAT
60: (2010)
MICROMANUFACTURING DESARROLLO DE TECNOLOGIAS DE MICROFABRIC. INNOVADORAS PARA LA GENERACION.... PSE-020400-2007-2
61: (2010)
MICROMANUFACTURING DESARROLLO DE TECNOLOGIAS DE MICROFABRIC. INNOVADORAS PARA LA GENERACION.... PSE-020400-2007-2
62: (2010)
MICROMANUFACTURING; DESARROLLO DE TECNOLOGIAS DE MICROFABRICACION INNOVADORAS PARA LA GENERACION DE NUEVOS NEGOCIOS Y EL INCREMENTO DE LA COMPETITIVIDAD DE LA IN
63: (2010)
MICROMANUFACTURING,PSE-420000-2008-2
64: (2010)
MICROMANUFACTURING,PSE-420000-2008-2
65: (2010)
REPAIR SCRIBE MARK DAMAGES BY LASE SHCK PEENING
66: (2010)
TMEMS-CM: subproyecto UPM B
67: (2011)
ISF 2G. La excelencia española en Rapid Manufacturing. Desarrollo y aplicación de la tecnología de deformación incremental de segunda generación, para aplicaciones estratégicas.
68: (2011)
CORTE DE SUBSTRATOS METÁLICOS PARA APLICACIONES FOTOVOLTAICAS
69: (2011)
DESARROLLO DE PROCESOS PARA FORMACIÓN DE CONTACTOS CON LÁSER PARA MÓDULOS THIN FILM CIGS PARA APLICACIONES FOTOVOLTAICAS
70: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
71: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
72: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
73: (2011)
DISEÑO DE INDUSTRIALIZACION DE MODULOS FOTOVOLTAICOS EN SILICIO DE CAPA FINA (MICROSIL08) PSE-120000-2007-7
74: (2011)
ESTUDIO SOBRE GENERACION DE ONDAS ULTRASÓNICAS MEDIANTE TECNOLOGÍA BASADA EN LÁSER PARA SISTEMAS DE INSPECCIÓN MULTIFUNCIONALES DE RÁPIDO DESPLIEGUE BASADOS EN R
75: (2011)
LA EXCELENCIA ESPAÑOLA EN RAPID MANUFACTURING. DESARROLLO Y APLICACION DE LA TECNOLOGIA DE DEFORMACION INCREMENTAL DE SEGUNDA GENERACION PARA APLICACIONES ESTRAT
76: (2011)
MICROMANUFACTURING; DESARROLLO DE TECNOLOGIAS DE MICROFABRICAION INNOVADORAS PARA LA GENERACION DE NUEVOS NEGOCIOS Y EL INCREMENTO PSE-020400-2007-2
77: (2012)
APLICACIÓN DE LA TECNOLOGÍA LÁSER AL PROCESADO DE MATERIALES
78: (2012)
ASISTENCIA TÉCNICA EN EL DESARROLLO DEL PROYECTO LEIA FASE I
79: (2012)
CONTRACT N. 033793 - PHODYE - NEW PHOTONIC SYSTEMS ON A CHIP BASED ON DYES FOR SENSOR APPLICATIONS SCALABLE AT WAFER FABRICATION.
80: (2012)
CORTE DE SUBSTRATOS METÁLICOS PARA APLICACIONES FOTOVOLTAICAS
81: (2012)
DESARROLLO DE PROCESOS PARA FORMACIÓN DE CONTACTOS CON LÁSER PARA MÓDULOS THIN FILM CIGS PARA APLICACIONES FOTOVOLTAICAS
82: (2012)
Desarrollo, Instrumentación y Control de Calidad de Procesos de Soldadura, Tratamiento Superficial y recubrimiento de Materiales con Láser
83: (2012)
Desarrollo, Instrumentación y Control de Calidad de Procesos de Soldadura, Tratamiento Superficial y recubrimiento de Materiales con Láser
84: (2012)
Desarrollo, Instrumentación y Control de Calidad de Procesos de Soldadura, Tratamiento Superficial y recubrimiento de Materiales con Láser
85: (2012)
ESTUDIO SOBRE LA REPARACIÓN DE DAÑOS POR MARCAS SUPERFICIALES MEDIANTE "LASER PEENING"
86: (2012)
INNDISOL. SUBPROG INNPACTO.
87: (2012)
LA EXCELENCIA ESPAÑOLA EN RAPID MANUFACTURING. DESARROLLO Y APLICACION DE LA TECNOLOGIA DE DEFORMACION INCREMENTAL DE SEGUNDA GENERACION PARA APLICACIONES ESTRAT
88: (2012)
MICROMANUFACTURING,PSE-420000-2008-2
89: (2012)
PROGRAMA MÁSTER TÍTULO PROPIO EN METROLOGÍA
90: (2012)
TECNOLOGÍA FOTOVOLTAICA DE THIN FILM CIGS
91: (2013)
ANÁLISIS INTEGRADO TEÓRICO-EXPERIMENTAL DE LA TÉCNICA LSP APLICADA A LA MEJORA DE PROPIEDADES MECÁNICAS Y SUPERFICIALES DE COMPONENTES METÁLICOS DE ALTA FIABILIDAD
92: (2013)
APLICACIÓN DE LA TECNOLOGÍA LÁSER AL PROCESADO DE MATERIALES
93: (2013)
APPOLO: Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing
94: (2013)
LASER SHOCK PEENING TREATMENT, PROVIDED BY POLIMA TO IMPROVE MECHANICAL PROPERTIES OF THIN AI2024-T351 CLAD (R&T LSP POLIMA CORINNA)
95: (2013)
LASER SHOCK PEENING TREATMENT TO IMPROVE MECHANICAL PROPERTIES OF THIN AI2024-T351 CLAD (2 MM THICK)
96: (2013)
2012 ETXE TAR-A.T. DESARROLLO PROY.LEIA
97: (2013)
2013 ETXE-TAR-A.T. DESARROLLO PROYECTO L
98: (2013)
4TH INTERNATIONAL CONFERENCE ON LASER PEENING ADN RELATED PHENOMENA
99: (2013)
4TH INTERNATIONAL CONFERENCE ON LASER PEENING ADN RELATED PHENOMENA
100: (2014)
ANÁLISIS INTEGRADO TEÓRICO-EXPERIMENTAL DE LA TÉCNICA LSP APLICADA A LA MEJORA DE PROPIEDADES MECÁNICAS Y SUPERFICIALES DE COMPONENTES METÁLICOS DE ALTA FIABILIDAD
101: (2014)
APLICACIÓN DE LA TECNOLOGÍA LÁSER AL PROCESADO DE MATERIALES
102: (2014)
IKERGUNE-DESARROLLO PROYECTO FULLASER
103: (2014)
MICROMANUFACTURING; DESARROLLO DE TECNOLOGIAS DE MICROFABRICACION INNOVADORAS PARA LA GENERACION DE NUEVOS NEGOCIOS Y EL INCREMENTO DE LA COMPETITIVIDAD DE LA IN
104: (2014)
MICROMANUFACTURING; DESARROLLO DE TECNOLOGIAS DE MICROFABRICAION INNOVADORAS PARA LA GENERACION DE NUEVOS NEGOCIOS Y EL INCREMENTO PSE-020400-2007-2
105: (2014)
PARQUES CIENTIFICOS Y TECNOLOG. P-2001-36- DESARROLLO CE INSTRUMENTACION INDUS. DE TECNOLOGIAS AVANZADAS DE FABRICACION BASADAS EN EL E. DE LASERES DE POTENCIA
106: (2015)
APLICACIÓN DE LA TECNOLOGÍA LÁSER AL PROCESADO DE MATERIALES
107: (2015)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
108: (2015)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
109: (2015)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
110: (2015)
FRACTAL: Desarrollo basado en tecnología española de sistemas avanzados de fabricación y prototipado de componentes estratégicos mediante sinterizado de polvo asistido por láser (FRACTAL)
111: (2015)
LÁSER CHOCK PEENING BY POLIMA (POLIMA-CORINNA 2014)
112: (2015)
LASER4FUN: EUROPEAN ESRs NETWORK ON SHORT PULSED LASER MICRO/NANOSTRUCTURING OF SURFACES
113: (2015)
MECHANISMS OF RESIDUAL STRESS GENERATION IN MECHANICAL SURFACE TREATMENT: THE ROLE OF CYCLIC PLASTICITY AND TEXTURE (MEDUSA)
114: (2015)
MECHANISMS OF RESIDUAL STRESS GENERATION IN MECHANICAL SURFACE TREATMENT: THE ROLE OF CYCLIC PLASTICITY AND TEXTURE (MEDUSA)
115: (2015)
PILOT INNG INNOVATION PROGRAMA MADAME CURIE CONFUND
116: (2015)
SHOCKLAS-RELY: Análisis integrado teórico-experimental de la técnica LSP aplicada a la mejora de propiedades mecánicas y superficiales de componentes metálicos de alta fiabilidad
117: (2015)
1ª RESOLUCIÓN ADJUDICACIÓN AYUDAS PARA PROMOCIÓN DE LA INVESTIGACIÓN EUROPEA.
118: (2015)
4ª RESOLUCIÓN ADJUDICACIÓN DE AYUDAS PARA PROMOCIÓN DE LA INVESTIGACIÓN EN LA UPM. (INVESTIGACIÓN EUROPEA)
119: (2015)
4TH INTERNATIONAL CONFERENCE ON LASER PEENING ADN RELATED PHENOMENA
120: (2016)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
121: (2016)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
122: (2016)
LASERTECH ( ERASMUS+ 2015-1-ESO1-KA202-015829)
123: (2016)
LSP-BIOMAG: Tratamiento mediante LSP de Aleaciones de Magnesio Biodegradables y Bio-reabsorbibles como Método de Mejora de sus Propiedades Mecánicas
124: (2016)
LSP-BIOMAG: Tratamiento mediante LSP de Aleaciones de Magnesio Biodegradables y Bio-reabsorbibles como Método de Mejora de sus Propiedades Mecánicas
125: (2016)
LSP-BIOMAG: Tratamiento mediante LSP de Aleaciones de Magnesio Biodegradables y Bio-reabsorbibles como Método de Mejora de sus Propiedades Mecánicas
126: (2016)
MECHANISMS OF RESIDUAL STRESS GENERATION IN MECHANICAL SURFACE TREATMENT: THE ROLE OF CYCLIC PLASTICITY AND TEXTURE (MEDUSA)
127: (2016)
MONOTORING LASER SHOCK PEENING FOR STRESS-CORROSION CRACKING AND FATIGUE RESISTANCE ENHANCEMENT OF LAUNCHERS STRUCTURES
128: (2016)
PILOT INNG INNOVATION PROGRAMA MADAME CURIE CONFUND
129: (2016)
TRATAMIENTO MEDIANTE LSP DE ALEACIONES DE MAGNESIO BIODEGRADABLES Y BIO-REABSORBIBLES COMO METODO DE MEJORA DE SUS PROPIEDADES MECANICAS
130: (2017)
ACIE-EVAL PROY 73.089.16 DESAR TECNOL LASER
131: (2017)
CENTRO ESP METROLOGIA-ESTUDIO MARCADO LASER MASAS
132: (2017)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
133: (2017)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
134: (2017)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
135: (2017)
MECHANISMS OF RESIDUAL STRESS GENERATION IN MECHANICAL SURFACE TREATMENT: THE ROLE OF CYCLIC PLASTICITY AND TEXTURE (MEDUSA)
136: (2017)
MONOTORING LASER SHOCK PEENING FOR STRESS-CORROSION CRACKING AND FATIGUE RESISTANCE ENHANCEMENT OF LAUNCHERS STRUCTURES
137: (2017)
PILOT INNG INNOVATION PROGRAMA MADAME CURIE CONFUND
138: (2018)
DESARROLLO BASADO EN TECNOLOGÍA ESPAÑOLA DE SISTEMAS AVANZADOS DE FABRICACIÓN PROTOTIPADO DE COMPONENTES ESTRATÉGICOS MEDIANTE SINTERIZADO DE POLVO ASISTIDO POR LÁSER (FRACTAL)
139: (2018)
LASERTECH ( ERASMUS+ 2015-1-ESO1-KA202-015829)
140: (2019)
AENOR-2011/0958/PIDI/08 BIELAS-CRAK
141: (2019)
LA EXCELENCIA ESPAÑOLA EN RAPID MANUFACTURING. DESARROLLO Y APLICACION DE LA TECNOLOGIA DE DEFORMACION INCREMENTAL DE SEGUNDA GENERACION PARA APLICACIONES ESTRAT
142: (2019)
MAT4.0-CM: FABRICACION INTELIGENTE DE MATERIALES AVANZADOS PARA EL TRANSPORTE, LA ENERGIA Y LA SALUD (UPM-GRIAL)
143: (2019)
MONOTORING LASER SHOCK PEENING FOR STRESS-CORROSION CRACKING AND FATIGUE RESISTANCE ENHANCEMENT OF LAUNCHERS STRUCTURES
144: (2019)
TRATAMIENTO MEDIANTE LSP DE ALEACIONES DE MAGNESIO BIODEGRADABLES Y BIO-REABSORBIBLES COMO METODO DE MEJORA DE SUS PROPIEDADES MECANICAS (LSP-BIOMAG)
Formación de Investigadores y Movilidad
5 Tesis Doctorales
1: (2014)
Desarrollo de Métodos para la Caracterización Predictiva Acoplada de Tensiones y Deformaciones en Procesos de Tratamiento Superficial mediante Ondas de Choque Generadas por Láser
2: (2017)
DESARROLLO DE MÉTODOS PARA EL ANÁLISIS Y CARACTERIZACIÓN PREDICTIVA DE PROCESOS DE TEMPLE CON LÁSER DE COMPONENTES DE ACERO FORJADO EN EL SECTOR DE AUTOMOCIÓN. FRANCISCO CORDOVILLA BARÓ
3: (2017)
DESARROLLO DE MÉTODOS PARA LA ACOTACIÓN DE LA INCERTIDUMBRE EN MEDIDAS DE TENSIONES RESIDUALES EN MATERIALES METÁLICOS TRATADOS POR LSP. AUTOR: DAVID PERAL JIMÉNEZ
4: (2017)
DESARROLLO E INSTRUMENTACIÓN DE PROCESOS DE SOLDADURA CON LÁSER DE CHAPAS FINAS DE ACEROS DISIMILARES PARA APLICACIONES EN EL SECTOR DE ELECTRODOMÉSTICOS. ALEJANDRO TUR GIL
5: (2018)
DESIGN AND ANALYSIS OF NOVEL STRUCTURAL GEOMETRIES FOR PIEZORESISTIVE PRESSURE SENSORS ALLOWING IMPROVED MEASUREMENT SENSITIVITY
Difusión de Resultados de Investigación
202 Artículos en revistas
1: (2007)
Advanced 3D micromachining techniques using UV laser sources.
2: (2007)
Aluminium Friction Stir Processing - Roughness vs. Macro/Microscopically Results
3: (2007)
Análisis de la influencia del factor de solapamiento en el tratamiento térmico de superficies extensas de aceros por láser - Analysis of the influence of the overlapping factor in the laser transformation hardening of extended surfaces of steel
4: (2007)
Design of an Advanced Incremental Fuzzy Logic Controller for Laser Surface Treatments.
5: (2007)
FEM model of the butt cold welding.
6: (2007)
Generación de un campo de tensiones residuales en compresión en aluminio 2024-t351 mediante tratamiento por onda de choque generada por láser (Laser Shock Processing).
7: (2007)
Hybrid Fuzzy Logic Control of Laser Surface Heat Treatments
8: (2007)
Laser Shock Processing as a Method for the Improvement of Metallic Materials Surface Properties: A Discusion on the Influence of Combined Mechanical and Thermal Effects.
9: (2007)
New techniques for laser microprocessing of photovoltaic devices based on thin-film a-Si:H
10: (2007)
Optical characterization of extremely small volumes of liquid in sub-micro-holes by simultaneous reflectivity, ellipsometry and spectrometry.
11: (2007)
Short pulse laser microforming of thin metal sheets for MEMS manufacturing.
12: (2007)
Ultraviolet Nanosecond Laser-Assisted Micro-Modifications in Lithium Niobate Monitored by Nd 3+ Luminiscence.
13: (2008)
Análisis de la Influencia de los Parámetros Operacionales en Recubrimientos Superficiales Asistidos por Láser de Acero AISI 431 sobre Acero al Carbono
14: (2008)
Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser
15: (2008)
Avances en la fabricación de células y módulos fotovoltaicos de silicio en capa fina mediante láser
16: (2008)
Cold welding on cogged surface
17: (2008)
Design of an advanced incremental fuzzy logic controller for laser surface heat treatments
18: (2008)
Diseño de un Sistema de Monitorización y Control de Procesos de Tratamiento Térmico Superficial de Materiales con Láser Mediante Realimentación de Estados
19: (2008)
FEM Model for friction Stir Welding of Aluminium
20: (2008)
Laser heating: a minimally invasive technique for studying fire-generated heating in building stone
21: (2008)
Laser shock processing as a method of decreasing fatigue of a die-casting die made of maraging steel
22: (2008)
Metrología óptica dimensional submicrométrica para determinación de espesores en sub-micro estructuras
23: (2008)
Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns
24: (2008)
Micromecanizado Láser de Componentes de Gran calidad de Acabado Superficial
25: (2008)
Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing
26: (2008)
Naval propellers reconditioning by Friction stir welding ¿ FSW
27: (2008)
New Approach on the Cold Welding of Metals: Application to Aluminium Bars
28: (2008)
Optimización de Procesos de Inducción de Tensiones Residuales en Compresión en Materiales Metálicos por Ondas de Choque Generadas por Láser
29: (2008)
Simultaneous Reflectivity, Ellipsometry and Spectrometry Measurements in Submicron Structures for Liquid Sensing
30: (2008)
Soldadura láser remota de aceros de alto límite elástico
31: (2008)
Strain-Hardness Correlation in Aluminium Butt Cold Welded Joints
32: (2008)
Strain-hardness correlation in aluminium butt cold welded joints
33: (2008)
TEMPLUM: A Process Adapted Numerical Simulation Code for The 3D Predictive Assessment of Laser Surface Heat Treatments in Planar Geometry
34: (2008)
Trazabilidad dimensional en las escalas de dureza
35: (2008)
3D Laser Micromachining Applications Development on a Dual ns Laser Based Processing System
36: (2009)
Adaptive neural network control system for laser surface heat treatments
37: (2009)
Analysis of residual stress and corrosion resistance of laser shock-processed 6012 and 6082 aluminium alloys
38: (2009)
FSW - Characteristic flaws in aluminium alloys joints
39: (2009)
Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies
40: (2009)
Laser shock microforming of thin metal sheets
41: (2009)
Laser shock processing of metallic materials. Prospects for application to release the residual stresses in FSW joints
42: (2009)
Material flow and hardening at butt cold welding of aluminium
43: (2009)
Nanosecond laser shock microforming of thin metal components
44: (2009)
Numerical simulation of plasma dynamics in laser shock processing experiments
45: (2009)
Optical characterization of the heat-affected zone in laser patterning of thin a-Si:H
46: (2009)
Optical observation of shock waves and cavitation bubbles in high intensity laser-induced shock processes
47: (2009)
Remote laser welding of automotive thin sheets
48: (2009)
Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H
49: (2010)
Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-t351
50: (2010)
Induction of Engineered Residual Stresses Fields and Associate Surface Properties Modification by Short Pulse Laser Shock Processing
51: (2010)
Laser Peening for improving metallic components
52: (2010)
Laser Shock Processing of 6061-T6 Al alloy with 1064 nm and 532 nm wavelengths
53: (2010)
Mechanical Behaviour of AA 2024-T4 Friction Stir Welded Joints Treated by Laser Shock Processing
54: (2010)
Numerical Thermo-Mechanical Modelling Of Stress Fields and Residual Constraints in Metallic Targets Subject To Laser Shock Processing
55: (2010)
Optimization of Laser Fired Contact Processes in c-Si Solar Cells
56: (2010)
Pérdidas eléctricas asociadas a procesos de interconexión con láser en dispositivos de lámina delgada
57: (2010)
Study of the refractive index change in a-Si:H thin films patterned by 532 nm laser radiation for photovoltaic applications
58: (2010)
Surface Repair of Tool Made of 12 Ni Maraging Steel by Laser Cladding of NiCoMo Powder
59: (2010)
Technological windows for MIAB welding of tubes featuring original longitudinal magnetization system with peripheral solenoids
60: (2010)
Thermomechanical Modelling of Stress Fields in Metallic Targets Subject to Laser Shock Processing
61: (2010)
Tratamiento de materiales metálicos por ondas de choque generadas por láser, como método de mejora de sus propiedades mecánicas superficiales
62: (2011)
A Virtual Laboratory for Laser Transformation Hardening
63: (2011)
A Virtual Laboratory for Laser Transformation Hardening
64: (2011)
Characterization of Friction Stir Welded Joints of AA 2024-T351 Native vs. Treated by Laser Shock Processing
65: (2011)
COMPARISION AND VALIDATION OF FEM MODEL FOR LASER BEAM WELDING OF AISI 304 STEEL SHEET
66: (2011)
Coupled RS's Fields and Deformation Control in the Laser Shock Processing of Thin Sheets for Fatigue Life Improvement
67: (2011)
Coupled Theoretical-Experimental Characterization of Plasma Dynamics and Thermo-Mechanical Wave Generation in Laser Shock Processing
68: (2011)
Development of Robotized Laser Welding Applications for Joining Thin Sheets
69: (2011)
Effect of Laser Shock Peening on Corrosion and Wear Behaviour of Aluminum Alloy
70: (2011)
Effect of laser shock processing on fatigue crack growth of duplex stainless steel
71: (2011)
Effect of laser shock processing on fatigue crack growth of duplex stainless steel
72: (2011)
Effect of plasma confinement on laser shock microforming of thin metal sheets
73: (2011)
Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies
74: (2011)
Laser Shock Microforming of Thin Metal Sheets with ns Lasers
75: (2011)
Laser Shock Microforming of Thin Metal Sheets with ns Lasers
76: (2011)
Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys
77: (2011)
Laser Shock Processing Influence on Tensile Behaviour of AA2024-T351 Friction Stir Welded Joints
78: (2011)
Mechanical behaviour of Nd:YAG laser welded superelastic NiTi
79: (2011)
Micromachining of 2D-3D structures with high intensity laser pulses
80: (2011)
Multiaxis Flexible Cell for Laser Precision Machining Design and Applications
81: (2011)
Recent achievements and trends in laser welding of thin plates
82: (2011)
Specific properties of ferritic/austenitic DISSIMILAR METALS WELDED JOINTS
83: (2011)
Summary of LSP Research Activities at CLUPM (Spain)
84: (2011)
Surface Modification of Aluminium Alloys with Laser Shock Processing
85: (2011)
Surface Modification of Aluminium Alloys with Laser Shock Processing
86: (2011)
The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens
87: (2011)
The Role of Short Pulse High Intensity Lasers in Material Surface Properties Modification and MEMS Manufacturing
88: (2011)
Thermal Stability of Induced RS's Fields and Fatigue Life Enhancement in High Performance Steels by LSP
89: (2011)
UV laser-induced high resolution cleaving of Si wafers for micro-nano devices and polymeric waveguide characterization
90: (2011)
UV laser-induced high resolution cleaving of Si wafers for micro/nano devices and polymeric waveguide characterization
91: (2012)
Fatigue in laser shock peened open-hole thin aluminium specimens
92: (2012)
Fatigue in laser shock peened open-hole thin aluminium specimens (vol 534, pg 573, 2012)
93: (2012)
Fracture Propagation and Stress Corrosion in the Case of Dissimilar Laser Hybrid Welded Joints
94: (2012)
Laser Ablation Modelling of Aluminium, Silver and Crystalline Silicon for Applications in Photovoltaic Technologies
95: (2012)
Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy
96: (2012)
Laser Shock Processing influence on local properties and overall tensile behavior of friction stir welded joints
97: (2012)
Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing
98: (2012)
Mechanical properties enhancement of high reliability metallic materials by laser shock processing
99: (2012)
Physical characterization of laser interaction and shock generation in laser shock processing. Coupled theoretical-experimental analysis
100: (2013)
Overall vs. local mechanical behaviour of ferritic austenitic steel joints made by laser welding
101: (2013)
Overall vs. local mechanical behaviour of ferritic austenitic steel joints made by laser welding
102: (2013)
Overall vs. local mechanical behaviour of ferritic austenitic steel joints made by laser welding
103: (2013)
Characterisation of Laser Hybrid Welded Dissimilar Joints
104: (2013)
Effects of laser shock processing on 316L stainless steel welds
105: (2013)
In situ structural characterization of laser welded NiTi shape memory alloys
106: (2013)
Induction of Engineered Residual Stresses Fields and Enhancement of Fatigue Life of High Reliability Metallic Components by Laser Shock Processing
107: (2013)
Laser shock processing: An emerging technique for the enhancement of surface properties and fatigue life of high-strength metal alloys
108: (2013)
LASER SHOCK PROCESSING: AN EMERGING TECHNIQUE FOR THE IMPROVEMENT OF FATIGUE LIFE AND SURFACE PROPERTIES OF HIGH RELIABILITY METALLIC COMPONENTS
109: (2013)
MECHANICAL BEHAVIOUR AND RESIDUAL STRESS FIELD OF DISSIMILAR LASER WELDED JOINTS
110: (2013)
Microstructural characterization and friction coefficient after the laser shock processing treatment on AISI 316 L stainless steel welds
111: (2013)
Residual stress distribution in ferritic to austenitic steel joints made by laser welding,
112: (2013)
Residual stress distribution in ferritic-austenitic steel joints made by laser welding
113: (2013)
Uncertainty Estimation for Performance Evaluation of a Confocal Microscope as Metrology Equipment
114: (2013)
Uncertainty Estimation for Performance Evaluation of a Confocal Microscope as Metrology Equipment
115: (2014)
APLICACIÓN DE MODELOS SIMPLIFICADOS PARA LA DETERMINACIÓN DE VENTANAS DE TRABAJO PARA EL TEMPLE DE ACEROS POR LÁSER
116: (2014)
Characterization of laser peening-induced effects on a biomedical Ti6Al4V alloy by thermoelectric means
117: (2014)
Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing
118: (2014)
Increasing of the superficial hardness of a coupling system realized from a low carbon steel ST37-2 by surface treatment with Nd:YAG laser
119: (2014)
Laser shock processing influence on constitutive behaviour of graded structures produced by laser welding of ferritic to austenitic stainless steel
120: (2014)
THE PRACTICAL IMPLEMENTATION OF LASER SURFACE HARDENING REQUIRES A PROPER DETERMINATION OF THE SPECIFIC WORKING PARAMETERS FOR EACH APPLICATION
121: (2014)
Uncertainty Estimation for Performance Evaluation of a Confocal Microscope as Metrology Equipment
122: (2015)
Computer-Aided Development of Thermo-Mechanical Laser Surface Treatments for the Fatigue Life Extension of Bio-Mechanical Components
123: (2015)
DEVELOPMENT OF MODIFIED WETABILITY SURFACES ON METALLIC SUBSTRATES BY SHORT PULSE LASER MICROSTRUCTURING
124: (2015)
Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening
125: (2015)
Eigenstrain simulation of residual stresses induced by laser shock processing in a Ti6Al4V hip replacement
126: (2015)
Fatigue Life Enhancement of High Reliability Metallic Components by Laser Shock Processing
127: (2015)
IMPROVEMENT OF MECHANICAL AND SURFACE PROPERTIES OF METALLIC ALLOYS BY LASER SHOCK PROCESSING
128: (2015)
Induction of through-thickness compressive residual stress fields in thin Al2024- T351 plates by laser shock processing
129: (2015)
Influence of pulse sequence and edge material effect on fatigue life of Al2024-T351 specimens treated by laser shock processing
130: (2015)
Laser Shock Processing of thin Al2024-T351 plates for induction of through-thickness compressive residual stresses fields
131: (2015)
Numerical-experimental analysis of the effect of surface oxidation on the laser transformation hardening of Cr-Mo steels
132: (2015)
Numerical-experimental analysis of the effect of surface oxidation on the laser transformation hardening of Cr-Mo steels
133: (2015)
Random-type scanning patterns in laser shock peening without absorbing coating in 2024-T351 Al alloy: A solution to reduce residual stress anisotropy
134: (2015)
Study on laser welding of AISI 316L austenitic stainless steel
135: (2015)
THERMOMECHANICAL MODELLING OF DIRECT LASER FORMING
136: (2016)
Bio inspired self-cleaning ultrahydrophobic aluminium surface by laser processing
137: (2016)
Characterization of mechanical shock waves in aluminum 6061-T6 using a high power laser pulse
138: (2016)
Characterization of the surface oxidation reaction and its influence on the radiation absorption during the surface laser hardening process of the 42CrMo4 steel.
139: (2016)
Chemical and Mechanical Characterization of AISI 304 and AISI 1010 Laser Welding
140: (2016)
Corrosion resistance of laser patterned ultrahydrophobic aluminium surface
141: (2016)
Design and Optimization of a novel Structural MEMS Piezoresistive Pressure Sensor
142: (2016)
Direct Generation of Superhydrophobic Microstructures in metals by UV Laser Sources in the Nanosecond Regime
143: (2016)
Effect of laser welding parameters on the austenite and martensite phase fractions of NiTi
144: (2016)
Effects of Laser Shock Peening on the Surface Integrity of 18
Ni Maraging Steel
145: (2016)
Estudio de la soldabilidad con láser de placas finas de inoxidable austenítico con inoxidable ferrítico
146: (2016)
Improvement of Surface and Mechanical Properties of High Strength Metallic Alloys by Laser Shock Processing
147: (2016)
Improvement of Surface and Mechanical Properties of High Strngth Metallic Alloys by Laser Shock Processing
148: (2016)
Influence of laser shock peening pulse density and spot size on the surface integrity of X2NiCoMo18-9-5 maraging steel
149: (2016)
Influence of the Pulse Repetition Rate on the Hierarchical Features of Micro-Channels Fabricated by ns Lasers in Different Materials
150: (2016)
Influence of the Pulse Repetition Rate on the Hierarchical Features of Micro-Channels Fabricated by ns Lasers in Different Materials
151: (2016)
INTEGRAL IMPROVEMENT OF MECHANICAL AND SURFACE PROPERTIES OF AISI 316L STAINLESS STEEL BY LASER SHOCK PROCESSING
152: (2016)
Measurement of plasma electron density generated in an experiment of Laser Shock Processing, utilizing the H alpha-line
153: (2016)
MEASUREMENT OF PLASMA ELECTRON DENSITY GENERATED IN AN EXPERIMENT OF LASER SHOCK PROCESSING, UTILIZING THE H?-line
154: (2016)
Numerical/experimental analysis of the laser surface hardening with overlapped tracks to design the configuration of the process for Cr-Mo steels
155: (2016)
On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening
156: (2016)
One-step fabrication of near superhydrophobic aluminum surface by nanosecond laser ablation
157: (2016)
Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction
158: (2016)
Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction (vol 100, pg 180, 2016)
159: (2016)
Thermomechanical modelling of direct laser forming
160: (2016)
Transition of the laser parameters from static to dynamic pulsed welding
161: (2016)
Uncertainty analysis for non-uniform residual stresses determined by the hole drilling strain gauge method
162: (2016)
Uncertainty analysis for non-uniform residual stresses determined by the hole drilling strain gauge method
163: (2017)
Annularly grooved membrane combined with rood beam piezoresistive pressure sensor for low pressure applications
164: (2017)
Design and optimization of a novel structural MEMS piezoresistive pressure sensor
165: (2017)
Design optimization and fabrication of a novel structural piezoresistive pressure sensor for micro-pressure measurement
166: (2017)
Diagnosis of plasma generated in an experiment of Laser Shock Processing, utilizing the H? line
167: (2017)
Experimental characterization of nanoparticles emissions during Laser Shock Processing of AA6061, AISI304 and Ti6Al4V
168: (2017)
Fabrication of multi-scale periodic surface structures on Ti-6Al-4V by direct laser writing and direct laser interference patterning for modified wettability applications
169: (2017)
Improvement of surface and mechanical properties of high strength metallic alloys by laser shock processing
170: (2017)
Improvement of surface and mechanical properties of high strength metallic alloys by laser shock processing
171: (2017)
Influence of ambient conditions on the evolution of wettability properties of an IR-, ns-laser textured aluminium alloy
172: (2017)
Measured strains correction for eccentric holes in the determination of non-uniform residual stresses by the hole drilling strain gauge method
173: (2017)
Minimization of the thermal material effects on pulsed dynamic laser welding
174: (2017)
Minimization of the thermal material effects on pulsed dynamic laser welding
175: (2017)
Robust fabrication of mu-patterns with tunable and durable wetting properties: hydrophilic to ultrahydrophobic via a vacuum process
176: (2017)
The design and analysis of a novel structural piezoresistive pressure sensor for low pressure measurement
177: (2017)
The design of a novel structural four-beams-bossed-membrane (FBBM) piezoresistive pressure sensor
178: (2017)
The Effects of Pulse Period on Nanosecond Laser Microfabrication
179: (2017)
Uncertainty analysis for non-uniform residual stresses determined by the hole drilling strain gauge method
180: (2018)
Application of massive laser shock processing for improvement of mechanical and tribological properties
181: (2018)
Design, fabrication and characterization of an annularly grooved membrane combined with rood beam piezoresistive pressure sensor for low pressure measurements
182: (2018)
Design optimization and fabrication of a novel structural piezoresistive pressure sensor for micro-pressure measurement
183: (2018)
Design Optimization and Fabrication of a Novel Structural SOI Piezoresistive Pressure Sensor with High Accuracy
184: (2018)
Design Optimization and Fabrication of a Novel Structural SOI Piezoresistive Pressure Sensor with High Accuracy
185: (2018)
Effects of laser processing on the transformation characteristics of NiTi: A contribute to additive manufacturing
186: (2018)
Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys
187: (2018)
Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys
188: (2018)
Minimization of the Thermal Impact in the Laser Welding of Dissimilar Stainless Steels
189: (2018)
Numerical-Experimental Study of the Consolidation Phenomenon in the Selective Laser Melting Process with a Thermo-Fluidic Coupled Model
190: (2018)
Superhydrophobicity on hierarchical periodic surface structures fabricated via direct laser writing and direct laser interference patterning on an aluminium alloy
191: (2018)
Superhydrophobicity on hierarchical periodic surface structures fabricated via direct laser writing and direct laser interference patterning on an aluminium alloy
192: (2019)
Chemical analysis on laser processed Ultrahydrophobic Ti-6A1-4V surface by high vacuum Process
193: (2019)
Customized laser beam intensity distribution for the laser surface treatment of geometrically convoluted components
194: (2019)
Effect of Three Different Finishing Processes on the Surface Morphology and Fatigue Life of A357.0 Parts Produced by Laser-Based Powder Bed Fusion
195: (2019)
Experimental Determination of Electronic Density and Temperature in Water-Confined Plasmas Generated by Laser Shock Processing
196: (2019)
Experimental Determination of Electronic Density and Temperature in Water-Confined Plasmas Generated by Laser Shock Processing
197: (2019)
Fatigue Properties of Maraging Steel after Laser Peening
198: (2019)
Fatigue Properties of Maraging Steel after Laser Peening
199: (2019)
Hybrid laser and vacuum process for rapid ultrahydrophobic Ti-6Al-4V surface formation
200: (2019)
The effect of material cyclic deformation properties on residual stress generation by laser shock processing
201: (2019)
Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy
202: (2019)
Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy
33 Capítulos de libros
1: (2007)
Surface Microstructuring by High Intensity Laser Pulses
2: (2008)
Application of Laser Shock Processing System by Underwater Irradiation (1064 nm) in Metal Surface
3: (2008)
DESARROLLO Y CARACTERIZACIÓN DE PROCESOS DE MICROCONFORMADO DE MATERIALES METÁLICOS MEDIANTE PULSOS LÁSER EN EL DOMINIO DE NANOSEGUNDOS
4: (2008)
Modelling of Laser Ablation Processes for Applications in Thin Film Photovoltaic Technology
5: (2008)
Sub-micro holes sensing cells analyzed by Fourier Transform IR-Visible Spectrometry for biochemical sensing.
6: (2008)
TRATAMIENTO DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER
7: (2008)
TRATAMIENTO SUPERFICIAL DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER COMO MÉTODO DE MEJORA DE SUS PROPIEDADES MÉCANICAS
8: (2008)
UV Laser Selective Ablation of Photovoltaic Materials for Monolithic Interconnection of Devices Based on a-Si:H
9: (2008)
Vertical resonant microcativites based on pillars analyzed by Beam Profile Ellipsometry and Reflectometry.
10: (2008)
Welding in solid state
11: (2009)
Comparative study of nanosecond and picosecond laser pattering of thin film for photovoltaic solar modules based on a-Si:H
12: (2009)
Contribution to the classification of the characteristic flaws in friction stir welded aluminium butt joints
13: (2009)
Design issues of engineered residual stress fields and associate surface properties modification by LSP in al and ti alloys
14: (2009)
Engineered Residual Stress Fields and Associated Mechanical Properties Enhancement in Metallic Alloys Induced by Laser Shock Processing
15: (2009)
Friction stir welding & laser shock processing effectiveness on modifying aluminium alloys properties
16: (2009)
Micro-Raman study of the thermal affected zone generated after a laser scribing process in a-Si:H photovoltaic thin films
17: (2009)
Operational windows for MIAB welding thick-walled tubes longitudinal magnetization
18: (2009)
Peculiarities of Black & White Welded Joints of Thin Sheets
19: (2010)
Assessment of Transitory Stress and Strain Field During Fusion Welding
20: (2010)
Designing the Weld Constitution of Dissimilar Metals Joints
21: (2010)
Laser Shock Processing Influence on Mechanical Behaviour of Friction Stir Welded Joints
22: (2010)
Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues
23: (2010)
LASER SHOCK PROCESSING TO IMPROVE THE RELIABILITY OF WELDED METAL STRUCTURES
24: (2010)
Mechanical Behaviour of AA 2024-T4 Friction Stir Welded Joints Treated by Laser Shock Processing
25: (2011)
Improvement of mechanical properties and life extension of high reliability structural components by laser shock processing
26: (2014)
Induction of Thermo-Mechanical Residual Stresses in Metallic Materials by Laser Shock Processing
27: (2014)
Induction of thermo-mechanical residual stresses in metallic materials by laser shock processing
28: (2014)
Laser Plasma Interaction and Shock Material Processing
29: (2014)
Laser Plasma Interaction and Shock Material Processing
30: (2015)
Computer-Aided Development of Thermo-Mechanical Laser Surface Treatments for the Fatigue Life Extension of Bio-Mechanical Components
31: (2015)
Computer-Aided Development of Thermo-Mechanical Laser Surface Treatments for the Fatigue Life Extension of Bio-Mechanical Components
32: (2015)
Fatigue life enhancement of high reliability metallic components by laser shock processing
33: (2015)
Fatigue life enhancement of high reliability metallic components by laser shock processing
49 Conferencias invitadas en congresos
1: (2007)
Remote Laser Welding of Galvanized Steels for Automotive Applications
2: (2007)
Surface Microstructuring by High Intensity Laser Pulses
3: (2007)
Trends in Laser Welding Processes
4: (2008)
Application of high intensity short pulse lasers to precision micromanufacturing
5: (2008)
LASER WELDING: HYBRID AND ALLIED LASER JOINING PROCESSES
6: (2008)
PREDICTIVE ASSESSMENT OF PLASMA DYNAMICS EFFECTS ON THE SHOCK TRANSFORMATION OF METALLIC ALLOYS BY LASER SHOCK PROCESSING
7: (2008)
Scientific and Technological Issues on the Application of High Intensity Lasers to Material Properties Modification: The case of Laser Shock Processing of Metallic Alloys
8: (2008)
STRAIN-HARNESS CORRELATION IN ALUMINIUM BUTT COLD WELDED JOINTS
9: (2009)
Current developments on high-intensity laser processing applications at Centro Láser UPM
10: (2009)
Engineered residual stress fields and associated mechanical properties enhancement in metallic alloys induced by laser shock processing
11: (2009)
Induction of engineered residual stresses fields and associate surface properties modification by short pulse laser shock processing
12: (2009)
Laser matter interaction in high-intensity laser processing applications
13: (2009)
Numerical thermo-mechanical modelling of stress fields and residual constraints in metallic targets subject to laser shock processing
14: (2009)
Theoretical modelling and experimental characterization of effects induced in metallic materials by ns-pulse, gw/cm2-level laser shock processing
15: (2010)
Laser Shock Processing: A technique for the improvement of surface mechanical properties of high reliability metallic alloys
16: (2010)
Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues
17: (2010)
Theoretical-Experimental Assessment of the Improvement of Surface Properties of Metallic Alloys Obtained by Laser Shock Processing
18: (2010)
2D/3D Micromachining Processes with UV Short Pulse Lasers for Industrial Manufacturing
19: (2011)
Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing
20: (2011)
Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys
21: (2011)
Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing
22: (2011)
Principales Desarrollos y Desafíos Metrológicos en el Ámbito de la Micro/Nano Fabricación. Algunas Aplicaciones en el Centro Láser de la UPM
23: (2011)
Summary of LSP Research Activities at CLUPM (Spain)
24: (2011)
The Role of Short Pulse High Intensity Lasers in Material Surface Properties Modification and MEMS Manufacturing
25: (2012)
Application of High-Intensity Short-Pulse Lasers to the Mechanical and Surface Properties Improvement of High Reliability Metallic Components by Shock Processing
26: (2012)
LASER SHOCK PROCESSING: AN EMERGING TECHNIQUE FOR THE IMPROVEMENT OF FATIGUE LIFE AND SURFACE PROPERTIES OF HIGH RELIABILITY METALLIC COMPONENTS
27: (2012)
Physical Characterization of Laser Interaction and Shock Generation in Laser Shock Processing: Coupled Theoretical-Experimental Analysis
28: (2013)
Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing
29: (2013)
High Intensity Lasers Application to Advanced Materials Processing: Laser Peening and Related Processes
30: (2013)
Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing
31: (2013)
Laser Shock Micro-Forming as an Emerging Technique for Microsystems Shaping and Adjustment
32: (2014)
Laser Shock Microforming of Thin Metal Sheets: Physical Principles, Modelling and Experimental Implementation (Keynote Paper)
33: (2015)
Fatigue life enhancement of high reliability metallic components by laser shock processing
34: (2015)
Integrated Development of LSP Process for the Improvement of Surface Properties and Fatigue Life of Metallic Components
35: (2015)
Simulation-Guided Induction of Through-Thickness Compressive Residual Stresses and Application of Laser Shock Processing to the Mitigation of the Effect of Surface Defects on the Fatigue Life of Thin Metal Plates
36: (2016)
Compressive Residual Stresses and Associated Surface Modifications Induced in Ti6Al4V by Laser Shock Processing
37: (2016)
Corrosion behaviour of Superhydrophobic Aluminium surfaces (Keynote paper)
38: (2016)
Laser shock processing: an emerging technique for the mechanical and surface properties enhancement of metallic materials (Keynote paper)
39: (2017)
GENERATION OF MODIFIED WETTABILITY METALLIC SURFACES BY SHORT PULSE LASERS
40: (2017)
Improvement of Fatigue Life and Surface Properties of Metallic Materials of Biomedical Interest by Laser Shock Processing
41: (2017)
Laser Shock Processing for the Enhancement of Mechanical and Surface Properties of Biocompatible Alloys
42: (2017)
Laser Shock Processing of Metallic Alloys: Process Overview and Development of Advanced Applications through the Integrated Modelling-Processing-Testing Approach for the Robust Design of Treatments on High-Reliability Components
43: (2018)
Direct Generation of Superhydrophobic Microstructures in Metals by UV Laser Sources in the Nanosecond Regime
44: (2018)
LAS TECNOLOGÍAS DE FABRICACIÓN ADITIVA: OPORTUNIDADES Y RETOS PARA LA INDUSTRIA
45: (2018)
Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys
46: (2018)
Numerical Simulation of Plasma Dynamics and Shock-Induced Residual Stresses in the Laser Shock Processing of Metallic Materials
47: (2018)
The Fundamental Role of Laser-Plasma Interaction and Materials Behaviour Models in the Predictive Assessment of Residual Stresses Fields Induced in Metallic Materials by LSP
48: (2018)
The Fundamental Role of Laser-Plasma Interaction and Materials Behaviour Models in the Predictive Assessment of Residual Stresses Fields Induced in Metallic Materials by LSP
49: (2019)
Integrated Analysis and Quality Control of Laser-Based Additive Manufacturing Processes
8 Cursos, seminarios y tutoriales
1: (2010)
Desarrollo de Geometrías 2D/3D sobre Componentes de Precisión mediante Micromecanizado por Láser.
2: (2010)
Microfabricación por Láser
3: (2010)
Summary on Laser Applications Research and Development at UPM Laser Centre (SPAIN)
4: (2010)
Theoretical Analysis and Experimental Implementation of Laser Shock Processing of Metallic Alloys for Enhanced Mechanical Behaviour
5: (2011)
Summary on High Intensity Laser Applications R&D at UPM Laser Centre (SPAIN)
6: (2012)
El Láser: Instrumento Clave en Ciencia y Tecnología
7: (2012)
Summary on High Intensity Laser Applications R&D at UPM Laser Centre (SPAIN)
8: (2019)
Laser Shock Processing: Principles and Applications
1 Libros
1: (2007)
Monitorización y Control Avanzado de Procesos de Tratamiento de Materiales con Láser. Monografías del Dpto. de Física Aplicada. Vol. 7
5 Otras Publicaciones
1: (2010)
Influence of Laser Peening Conditions on Surface Corrosion Resistance of Aluminium Alloy
2: (2011)
Development of Laser Shock Processing Technology (LSP) at UPM Laser Centre
3: (2011)
Laser Shock Processing: A Technique for the Improvement of Mechanical and Surface Propierties of High Reliability Metallic Alloys
4: (2011)
Mechanical Cycling of Laser Welded Joints in Superelastic NiTi
5: (2013)
Estudio de los Parámetros Atómicos Necesarios en la Diagnosis de Plasmas Fríos: aplicaciones al Proceso de LSP en Muestras de Aluminio 2024.
181 Ponencia en Congresos
1: (2007)
Hybrid Fuzzy Logic Control of Laser Surface Heat Treatments.
2: (2007)
Laser Selective Ablation of thin film structures based on a-Si:H.
3: (2007)
Laser shock processing to improve residual stresses with and without paint layer on 6061-T6 aluminium alloy.
4: (2007)
Model Based Optimization criteria for the generation of deep compressive residual stresses in high elastic limit alloys by laser shock processing.
5: (2007)
Model Based Plasma Monitoring Methods for the Predictive Assessment of LSP applications.
6: (2007)
Neural Control of Laser Surface Heat Treatments.
7: (2007)
Neural Model Reference Control of Laser Surface Heat Treatments
8: (2007)
New techniques for laser microprocessing of photovoltaic devices based on thin film a-si:H.
9: (2007)
Optical Sensing based on simultaneous ellipsometry, reflectivity and spectrometry profiles in sub-micron holes structures for bio-applications.
10: (2007)
Photonic sensors based on integrated reflectivity, ellipsometry and spectrometry measurements in submicron size geometries.
11: (2007)
Real Time Fuzzy Logic Control of Laser Surface Heat Treatments.
12: (2007)
Several Key-Topics in Laser Welding.
13: (2007)
Short pulse laser microforming of thin metal sheets for MEMS manufacturing.
14: (2007)
Simultaneous reflectivity, ellipsometry and spectrometry measurements in submicron structures for biosensing applications.
15: (2007)
Thin metal sheet bending and residual stresses relaxation by ns pulsed lasers in MEMS manufacturing.
16: (2007)
UV laser microprocessing of photovoltaic devices based on thin film a-Si:H.
17: (2007)
UV Laser Microprocessing of Thin Film Structures Based on a-Si.
18: (2008)
Análisis de la Influencia de los Parámetros Operacionales en Recubrimientos Superficiales Asistidos por Láser de Acero AISI 431 sobre Acero al Carbono
19: (2008)
Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser
20: (2008)
Avances en la fabricación de células y módulos fotovoltaicos de silicio en capa fina mediante láser
21: (2008)
Cold welding on cogged surfaces
22: (2008)
DESARROLLO Y CARACTERIZACIÓN DE PROCESOS DE MICROCONFORMADO DE MATERIALES METÁLICOS MEDIANTE PULSOS LÁSER EN EL DOMINIO DE NANOSEGUNDOS
23: (2008)
Development of 2D/3D Microstructuring Techniques using ns Pulsed UV Lasers
24: (2008)
DIRECT DEVELOPMENT OF 2D/3D MICROSTRUCTURES WITH UV LASERS IN THE NS REGIME
25: (2008)
Diseño de un Sistema de Monitorización y Control de Procesos de Tratamiento Térmico Superficial de Materiales con Láser Mediante Realimentación de Estados
26: (2008)
Diseño y desarrollo de un laboratorio virtual de aplicaciones industriales con láser
27: (2008)
EFFECT OF LASER SHOCK PROCESSING ON FATIGUE CRACK GROWTH AND FRACTURE TOUGHNESS OF ALUMINUM AND STEEL
28: (2008)
FEM model and experiments for friction stir spot welding of AA6061-T4
29: (2008)
Laser shock microforming of thin metal sheets
30: (2008)
Metrología óptica dimensional para la determinación de espesores en estructuras submicrométricas
31: (2008)
Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns
32: (2008)
Micromecanizado Láser de Componentes de Gran calidad de Acabado Superficial
33: (2008)
MODELLING OF LASER ABLATION PROCESSES FOR APPLICATIONS IN THIN FILM PHOTOVOLTAIC TECHNOLOGY
34: (2008)
Modelling of Laser Ablation Processes for Applications in Thin Film Photovoltaic Technology
35: (2008)
Modification of Thin Surface Layer of AlMgSiPb and AlSi1MgMn Alloys with Laser Shock Processing Method with Q-switched Nd:YAG Laser
36: (2008)
Nanosecond Laser Shock Microforming of Thin Metal Components
37: (2008)
New Approach for Laser Monolithic Interconnection of Photovoltaic Devices Based on a-Si:H
38: (2008)
New Approach on the Cold Welding of Metals: Application to Aluminium Bars
39: (2008)
Numerical Modelling of Stress Fields and Residual Constraints in Metallic Targets Subject to Laser Shock Processing
40: (2008)
Numerical simulation of plasma dynamics in laser shock processing experiments
41: (2008)
Numerical Simulation of Plasma Dynamics in Laser Shock Processing Experiments
42: (2008)
Optimización de Procesos de Inducción de Tensiones Residuales en Compresión en Materiales Metálicos por Ondas de Choque Generadas por Láser
43: (2008)
Optimization of interferometric photonic cells for biochemical sensing based on advanced high sensitivity optical techniques
44: (2008)
Optimization of Sub-micro-holes 2D periodic interferometric structures for biochemical sensing based on advance high sensitivity optical techniques
45: (2008)
Recent Results on Short Pulse Laser Microforming of Thin Metal Sheets
46: (2008)
Residual Stress Fields and Associated Modification of Surface Properties in Al and Ti Alloys Induced by Q-switched, ns Pulse, Laser Shock Processing
47: (2008)
SELECTIVE ABLATION OF PHOTOVOLTAIC MATERIALS WITH UV LASER SOURCES FOR MONOLITHIC INTERCONNECTION OF DEVICES BASED ON a-Si:H
48: (2008)
Soldadura láser remota de aceros de alto límite elástico
49: (2008)
Sub-micro holes sensing cells analyzed by Fourier Transform visible spectrometry for biochemical sensing
50: (2008)
Theoretical Description and Experimental Diagnosis of the Laser-Plasma Interaction in LSP applications. An Evaluation of the Effect of Interaction Parameters
51: (2008)
TRATAMIENTO DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER
52: (2008)
TRATAMIENTO SUPERFICIAL DE MATERIALES METÁLICOS POR ONDAS DE CHOQUE GENERADAS POR LÁSER COMO MÉTODO DE MEJORA DE SUS PROPIEDADES MÉCANICAS
53: (2008)
Trazabilidad dimensional en las escalas de dureza
54: (2008)
UV LASER SELECTIVE ABLATION OF PHOTOVOLTAIC MATERIALS FOR MONOLITHIC INTERCONNECTION OF DEVICES BASED ON a-Si:H
55: (2008)
UV laser-induced high resolution cleaving of Si wafers for micro-nano devices characterization
56: (2008)
Vertical resonant microcativites based on pillars analyzed by beam profile ellipsometry and reflectometry
57: (2008)
Welding in solid state
58: (2008)
3D Laser micromachining applications development on a dual ns based processing system
59: (2009)
Ajuste y Calibración de Microscopios Confocales
60: (2009)
Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-T351
61: (2009)
Comparative study of nanosecond and picosecond laser pattering of thin film for photovoltaic solar modules based on a-Si:H
62: (2009)
Contribution to the classification of the characteristic flaws in friction stir welded aluminium butt joints
63: (2009)
Design issues of engineered residual stress fields and associate surface properties modification by lsp in al and ti alloys
64: (2009)
Detection limit comparison of F-P based resonant cavities
65: (2009)
Friction stir welding & laser shock processing effectiveness on modifying aluminium alloys properties
66: (2009)
FSW - Characteristic flaws in aluminium alloys joints
67: (2009)
Laser shock processing of metallic materials. Prospects for application to release the residual stresses in FSW joints
68: (2009)
Laser shock processing technology (LSP), Basic principles and technological issues
69: (2009)
Microfabricación con Láser. Aplicaciones en el Centro Láser de la UPM
70: (2009)
Microfabricación 2D/3D con láser en el dominio micrométrico
71: (2009)
Microscopía óptica confocal de barrido láser como una herramienta de caracterización en el comportamiento de los fluidos en microcanales
72: (2009)
Model based analysis of the effect of irradiation parameters on the plasma driven thermal fluxes in laser shock processing
73: (2009)
Operational windows for MIAB welding thick-walled tubes longitudinal magnetization
74: (2009)
Optical characterization of the heat-affected zone in laser patterning of thin film a-Si:H
75: (2009)
Optical characterization of the heat-affected zone in laser scribing of thin film photovoltaic modules based on a-Si:H
76: (2009)
Peculiarities of black & white welded joints of thin sheets
77: (2009)
Prospects for fatigue behaviour and corrosion resistance improvement by LSP and FSP
78: (2009)
Quality assessment of 12 ni maraging steel after powder laser surfacing and subsequent heat treatment
79: (2009)
Residual stress fields and associate surface properties modification induced by laser shock processing in some characteristic al alloys
80: (2009)
Short overview of CLUPM activity
81: (2009)
Short pulse laser shock microforming of thin metal MEMS components
82: (2009)
Surface evaluation of laser shock processed aluminium alloy after pitting corrosion attack with optical 3-d metrology method
83: (2009)
Surface repair of tool made of 12 Ni maraging steel by laser cladding of Ni-Co-Mo powder
84: (2009)
Temperature influence on black & white joints characteristics
85: (2010)
Comparison of Surface Integrity and Corrosion Resistance of Laser Peened and Shot Peened ENAW 6082 Aluminium Alloy
86: (2010)
Coupled Theoretical-Experimental Analysis of Laser Interaction and Shock Generation in Laser Shock Processing
87: (2010)
Designing the weld constitution of dissimilar metals joints
88: (2010)
EFFECT OF PLASMA CONFINEMENT ON LASER SHOCK PROCCESSING OF THIN METAL SHEETS
89: (2010)
Heat transfer modelling in welded joints
90: (2010)
Laser Shock Processing Effectiveness in Increasing the Reliability of Welded Joints
91: (2010)
Laser Shock Processing Influence on Mechanical Behaviour of Friction Stir Welded Joints
92: (2010)
Laser shock processing technology (LSP): Basic principles and technological issues
93: (2010)
Laser shock processing to improve the reliability of welded metal structures
94: (2010)
Laser welding of super elastic NiTi shape memory alloy
95: (2010)
Mechanical Behaviour of AA 2024-T4 Friction Stir Welded Joints Treated by Laser Shock Processing
96: (2010)
Mechanical Characteristics Improvement by LSP on FSW joints
97: (2010)
Microprocesado láser para contactado frontal de células solares basadas en Silicio cristalino.
98: (2010)
Pérdidas eléctricas asociadas a procesos de interconexión con láser en dispositivos de lámina delgada
99: (2010)
Procesos láser en dispositivos fotovoltaicos de silicio en lámina delgada
100: (2010)
Simulación termo-mecánica de procesos de tratamiento superficial mediante ondas de choque generadas por láser
101: (2010)
Thermomechanical Modelling of Stress Fields in Metallic Targets Subject to Laser Shock Processing
102: (2010)
UV laser-induced high resolution cleaving for micro-nano devices and polymeric waveguides characterization
103: (2011)
Characterization Of Friction Stir Welded Joints Of Aa 2024-T351 Native Vs. Treated By Laser Shock Processing
104: (2011)
Comparison And Validation Of Fem Model For Laser Beam Welding Of Aisi 304 Steel Sheet
105: (2011)
Coupled RS's Fields and Deformation Control in the Laser Shock Processing of Thin Sheets for Fatigue Life Improvement
106: (2011)
Coupled Theoretical-Experimental Characterization of Plasma Dynamics and Thermo-Mechanical Wave Generation in Laser Shock Processing
107: (2011)
Development of Robotized Laser Welding Applications for Joining Thin Sheets
108: (2011)
Effect of Laser Shock Peening on Corrosion and Wear Behaviour of Aluminum Alloy
109: (2011)
Improvement of mechanical properties and life extension of high reliability structural components by laser shock processing
110: (2011)
Laser Shock Microforming of Thin Metal Sheets with ns Lasers
111: (2011)
Laser Shock Processing Influence on Tensile Behaviour of AA2024-T351 Friction Stir Welded Joints
112: (2011)
Micromachining of 2D-3D structures with high intensity laser pulses
113: (2011)
Multiaxis Flexible Cell for Laser Precision Machining ? Design and Applications
114: (2011)
Proposal for the Organization of the 4th International Conference on Laser Peeningand Related Phenomena
115: (2011)
Recent Achievements and Trends in Laser Welding of Thin Plates
116: (2011)
The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens
117: (2011)
The Role of Short Pulse High Intensity Lasers in Material Surface Properties Modification and MEMS Manufacturing
118: (2011)
Thermal Stability of Induced RS's Fields and Fatigue Life Enhancement in High Performance Steels by LSP
119: (2013)
Assessment of laser peening induced effects on Ti6Al4V by destructive and non-destructive techniques?. 4th International Conference on Laser Peening and Related Phenomena. Madrid (Spain), 6-10.MAY.2013
120: (2013)
Comparison of Hole Drilling and XRD Methods for the Measurement of Residual Stresses Induced by Laser Shock Processing in Metallic Materials.
121: (2013)
Effect of LSP treatment on the surface topography, friction and wear of Al2024 alloy
122: (2013)
Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel
123: (2013)
Experimental Implementation of LSP Processes and Associated Diagnosis with Q-switched ns-Pulsed Lasers
124: (2013)
Laser Shock Microforming of Thin Metal Sheets with Q-switched ns-Pulsed Lasers
125: (2013)
Laser Shock Processing of Welded Joints for Mechanical Properties Improvement
126: (2013)
LSP influence on mechanical properties of thin dissimilar laser welded joints
127: (2013)
Numerical Prediction of Residual Stresses Fields Induced in Thin Al2024-T351 Sheets by Laser Shock Processing
128: (2013)
Roughening of metallic biomaterials by abrasiveless water jet peening: effects on fatigue strength and ion release
129: (2013)
Simulación Termo-Mecánica de Procesos de Conformado Directo por Láser
130: (2013)
Slow-Down of Fatigue Crack Propagation in Thin Al2024-T351 Sheets by Laser Peening
131: (2014)
Induction of Through-Thickness Compressive Residual Stress Fields in Thin Al2024-T351 Plates by Laser Shock Processing
132: (2014)
Thermoelectric assessment of laser peening induced effects on a metallic biomedical Ti6Al4V
133: (2015)
Alpha-Line Characterization of Electronic Density in Plasmas Generated by Laser Shock Processing
134: (2015)
Analysis of induced surface modifications effects on the electrochemical behaviour of LSP-treated metallic alloys
135: (2015)
Development of a Cyber-Physical System based on selective Gaussian naive Bayes model for a self-predict laser surface heat treatment process control
136: (2015)
Development of Modified Wetability Surfaces on Metallic Substrates by Short Pulse Laser Microstructuring
137: (2015)
Improvement of Mechanical and Surface Properties of Metallic Alloys by Laser Shock Processing
138: (2015)
Induction of Through-Thickness Compressive Residual Stresses and Application to the Mitigation of the Effect of Surface Defects on the Fatigue Life of Thin Metal Plates by LSP
139: (2015)
Integrated Development of LSP Process for the Improvement of Surface Properties and Fatigue Life of Metallic Components
140: (2015)
Integrated Modelling/Diagnosis/Testing Methodology in LSP Process Development for the Improvement of Fatigue Life of Metallic Components
141: (2015)
Laser Shock Processing: An Advanced Technique for Improving the Surface and Mechanical Properties of Metallic Alloys
142: (2015)
Laser Shock Processing: An Advanced Technique for Improving the Surface and Mechanical Properties of Metallic Alloys
143: (2015)
One-Step Generation of Ultrahydrophobic Aluminum Surface Patterns by Nanosecond Lasers
144: (2015)
Single Step Generation of Microstructured Hydrophobic Aluminium Surface by ns Laser
145: (2016)
Development of bio-inspired self-cleaning metallic surfaces by ns laser processing
146: (2016)
Evaluation of the changes in electrochemical behaviour induced in materials subject to laser shock processing
147: (2016)
Experimental studies on the induction of compressive residual stresses in metallic materials by laser shock processing
148: (2016)
Experimental studies on the induction of compressive residual stresses in metallic materials by laser shock processing
149: (2016)
High spatial accuracy beam delivery system for the customized laser surface hardening of convoluted geometry components
150: (2016)
High spatial adaptability beam delivery system for the laser surface hardening of automotive components by high power fiber lasers
151: (2016)
High spatial adaptability beam delivery system for the laser surface hardening of automotive components by high power fiber lasers
152: (2016)
Integral Improvement of Mechanical and Surface Properties of AISI 316L Stainless Steel by Laser Shock Processing
153: (2016)
Integral Improvement of Mechanical and Surface Properties of Metallic Materials of Interest in Aerospace Applications by Laser Shock Processing
154: (2016)
Integration of experimental characterization methods for the assessment of the LSP treatment of metallic materials
155: (2016)
Modeling of the selective laser melting process considering heat transfer in porous media
156: (2016)
Numerical modelling of the effect of laser shock processing on the residual stress fields of high reliability materials
157: (2016)
Numerical-Experimental Analysis of the effect of surface oxidation of the laser transformation hardening of Cr-Mo steels
158: (2016)
Predictive assessment of the direct laser forming of thin metal sheets
159: (2016)
Robust Transformation of wetting properties of metallic surfaces by ns lasers
160: (2016)
Thermal modelling of powder based selective laser melting processes
161: (2016)
Transition from static to dynamic regime in the laser welding of thin stainless steel sheets
162: (2016)
Transition from static to dynamic regime in the laser welding of thin stainless steel sheets
163: (2017)
A COMPREHENSIVE MODEL FOR THE COUPLED PREDICTIVE ASSESSMENT OF RESIDUAL STRESSES AND DEFORMATIONS IN LASER SHOCK PROCESSING OF METALLIC MATERIALS
164: (2017)
A Fluid-Dynamic Numerical Model for the Selective Laser Melting of High-Thickness Metallic Layers
165: (2017)
Analysis Of The Effect Of Surface Oxidation On The Laser Transformation Hardening Of Cr-mo Steels
166: (2017)
Estudio del efecto del marcado láser en pesas patrón.
167: (2017)
Improvement of fatigue life and surface properties of metallic materials of biomedical interest by laser shock processing
168: (2017)
Improvement of fatigue life and surface properties of metallic materials of biomedical interest by laser shock processing
169: (2017)
STUDY OF THE EFFECT OF LASER MARKING FOR STANDARD WEIGHTS
170: (2017)
The design of a novel structural four-beams-bossedmembrane (FBBM) piezoresistive pressure sensor
171: (2017)
The design of a novel structural four-beams-bossedmembrane (FBBM) piezoresistive pressure sensor
172: (2018)
Application of Laser Shock Processing to the Surface and Mechanical Resistance Properties Modification of Bioreabsorbable Magnesium Alloys
173: (2018)
CHARACTERIZATION OF PLASMA SHOCK WAVES AND CAVITATION BUBBLES PRODUCED BY A HIGH ENERGY LASER PULSE THROUGH OPTICAL AND ELECTRONIC TECHNIQUES
174: (2018)
Fabrication of multi-scale periodic surface structures on Ti-6Al-4V for modified wettability applications by Direct Laser Writing and Direct Laser Interference Patterning
175: (2018)
Fabrication of multi-scale periodic surface structures on Ti-6Al-4V for modified wettability applications by Direct Laser Writing and Direct Laser Interference Patterning
176: (2018)
FATIGUE RESISTANCE OF MARAGING STEEL AFTER LASER PEENING
177: (2018)
Minimización del aporte térmico con preservación de la estanqueidad en la soldadura láser de chapas finas de aceros inoxidables disimilares
178: (2018)
Minimización del aporte térmico con preservación de la estanqueidad en la soldadura láser de chapas finas de aceros inoxidables disimilares
179: (2018)
Modelo numérico para la caracterización termo-fluídica del proceso de Fusión Selectiva por Láser
180: (2018)
Modelo numérico para la caracterización termo-fluídica del proceso de Fusión Selectiva por Láser
181: (2019)
Non-linear thermal model of the Direct Laser Melting Process considering the adhesion of the consolidated material to the substrate using a domain with discontinuous material properties
Explotación de Resultados y Transferencia de Tecnología
32 Patentes
1: (2008)
Sistema de Monitorización y Control de Procesos de Tratamiento Térmico Superficial de Materiales con Láser Mediante un Sistema de Control Neuronal Adaptativo Mediante Modelo de Referencia
2: (2008)
Sistemas de detección óptica para bio-ensayos de alta sensibilidad sin marcado.
3: (2009)
Procedimiento de marcaje, encriptación, etiquetado y codificación óptica
4: (2009)
Sistema de detección óptica para bio-ensayos de alta sensibilidad sin marcado
5: (2010)
Optical detection system for labeling-free high-sensitivity biological assay, has biosensitive cells and fluid connections rested on substrate, and optical head arranged to perform analysis with respect to cells and analytes in head.
6: (2010)
Optical detection system for labeling-free high-sensitivity biological assay, has biosensitive cells and fluid connections rested on substrate, and optical head arranged to perform analysis with respect to cells and analytes in head.
7: (2010)
Procedimiento de marcaje, encriptación, etiquetado y codificación óptica
8: (2010)
Sistemas de detección óptica para bio-ensayos de alta sensibilidad sin marcado.
9: (2011)
Procedimiento de marcaje, encriptación, etiquetado y codificación óptica
10: (2011)
Sistema de detección óptica para bio-ensayos de alta sensibilidad sin marcado
11: (2011)
Sistema de monitorización y control de procesos de tratamiento térmico superficial de materiales con láser mediante control borroso
12: (2011)
Sistema de monitorización y control de procesos de tratamiento térmico superficial de materiales con láser mediante un control neuronal adaptativo mediante modelo de referencia
13: (2012)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN ETIQUETADO Y CODIFICACIÓN ÓPTICA
14: (2012)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN ETIQUETADO Y CODIFICACIÓN ÓPTICA
15: (2012)
SISTEMAS DE DETECCION OPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
16: (2012)
SISTEMAS DE DETECCION OPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
17: (2013)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN ETIQUETADO Y CODIFICACIÓN ÓPTICA
18: (2013)
SISTEMAS DE DETECCION OPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
19: (2016)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
20: (2016)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
21: (2016)
SISTEMA DE DETECCIÓN ÓPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
22: (2016)
Sistema para la obtención de un vehículo con carrocería descapotable
23: (2017)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
24: (2017)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
25: (2017)
PROCEDIMIENTO DE MARCAJE, ENCRIPTACIÓN, ETIQUETADO Y CODIFICACIÓN ÓPTICA
26: (2017)
SISTEMA DE DETECCIÓN ÓPTICA PARA BIO-ENSAYOS DE ALTA SENSIBILIDAD SIN MARCADO
27: (2017)
Sistema para la obtención de un vehículo con carrocería descapotable
28: (2017)
Sistema para la obtención de un vehículo con carrocería descapotable
29: (2018)
METHOD AND SYSTEM FOR LASER HARDENING OF A SURFACE OF A WORKPIECE
30: (2018)
Sistema de detección óptica para bio-ensayos de alta sensibilidad sin marcado
31: (2019)
Procedimiento de marcaje, encriptación, etiquetado y codificación óptica
32: (2019)
Sistema de detección óptico para bio-ensayos de alta sensibilidad sin marcado
• TOMA DE DATOS DE MEMORIAS Y CV
• UPM.ES
S2i 2023 Observatorio de investigación @ UPM con la colaboración del Consejo Social UPM
Cofinanciación del MINECO en el marco del Programa INNPACTO (IPT-020000-2010-22)
